Skip to main content
RSC Advances logoLink to RSC Advances
. 2021 Dec 1;11(61):38691–38693. doi: 10.1039/d1ra06963b

Scalable synthesis of favipiravir via conventional and continuous flow chemistry

Thanat Tiyasakulchai 1,, Netnapa Charoensetakul 1,, Thitiphong Khamkhenshorngphanuch 2, Chawanee Thongpanchang 1, Onsiri Srikun 3, Yongyuth Yuthavong 1, Nitipol Srimongkolpithak 1,
PMCID: PMC9044180  PMID: 35493228

Abstract

Decagram scale synthesis of favipiravir was performed in 9 steps using diethyl malonate as cheap starting material. Hydrogenation and bromination steps were achieved by employing a continuous flow reactor. The synthetic process provided a total of 16% yield and it is suitable for larger-scale synthesis and production.


Decagram scale synthesis of favipiravir was performed in 9 steps using diethyl malonate as cheap starting material.graphic file with name d1ra06963b-ga.jpg

Introduction

Favipiravir (1, sold under the brand name Avigan, 6-fluoro-3-hydroxy-2-pyrazinecarboxamide) is an antiviral drug that has hitherto been used to treat influenza. Since the onset of the SARS-COV-2 (Severe Acute Respiratory Syndrome-Coronavirus-2) pandemic, favipiravir has been re-purposed to treat COVID-19 patients under emergency provision in several countries. Its efficacy against COVID-19 has been extensively investigated in clinical trials1,2 (see https://clinicaltrials.gov). Favipiravir's safety has already been demonstrated by its extensive use as an anti-influenza drug in Japan. Pharmacologically, favipiravir bears a pyrazine scaffold and works as a prodrug that undergoes biotransformation for the inhibition of virus RNA-dependent RNA polymerase.3 The favourable safety profile and known mechanism of action make favipiravir one of the promising re-purposing drugs against COVID-19.

The synthesis routes of favipiravir have been reported by academic groups and companies, including an innovator Toyama Chemicals.3–5 However, most of the reported synthetic routes were carried out on a small scale and some required costly column chromatography. Their starting materials have been disclosed, including 2-aminomalonamide (2),6 3-hydroxypyridine-2-carboxamide (3),7,8 3-aminopyrazine-2-carboxylic acid (4),9 pyrazine-2-carbonitrile (5),10 2-aminopyrazine (6),11 synthesising favipiravir via the key intermediate 3,6-dichloropyrazine-2-carbonitrile (7). Toyama Chemicals' patent also indicated that it was possible to synthesize favipiravir from the starting material 8via another key intermediate 9 (ref. 12) (Scheme 1). However, during the pandemic, Toyama Chemicals have indicated that diethyl malonate (10) was sourced as starting material for commercial production,13 but have not reported synthetic methods. We and other workers believe that diethyl malonate could be used for the synthesis of 2-aminomalonamide (2).3 Diethyl malonate is cheap and easy to source during the pandemic. However, the total synthetic route for the synthesis of favipiravir from diethyl malonate has not been reported and may need to be altered for scaled production.

Scheme 1. Reported starting materials for favipiravir synthesis.

Scheme 1

In this project, our group aimed to develop a scalable synthetic route of favipiravir from diethyl malonate. Each reaction was optimized and modified from the reported protocol. Moreover, continuous flow chemistry was also introduced for assistance in hydrogenation and bromination reactions, resulting in a 16% total yield via 9 steps synthesis (Scheme 2).

Scheme 2. Total synthesis of favipiravir from diethyl malonate 10.

Scheme 2

Results and discussion

Our study was initiated by treating 100 g of 10 in glacial acetic acid with sodium nitrile in water slowly at −10 °C to obtain diethyl oximinomalonate (11)14 (Table S1). Notably, oximinomalonate was not stable for long-term storage, whereas the HCl salt of diethyl 2-aminomalonate (12) was more stable and commercially available. The compound 11 underwent hydrogenation reaction in batch and continuous flow manners. While the batch reaction can not be completed in 24 hours under hydrogen at atmospheric pressure, the continuous flow reaction using Pd/Si in a packed bed column achieved a resident time in the column of only 7 minutes at 60 °C (Table 1 and Fig. 1). We found that crude 12 could be used without further purification

Optimization of the hydrogenation reaction and conditions.

graphic file with name d1ra06963b-u1.jpg
Entry Reagent Catalyst Time Temp. (°C) Conversion (%)
1a H2 (excess) Pd/C, 5% wt 24 h 30 66
2 H2 (1 eq.) Pd/Si 7 min 30 86
3 H2 (4 eq.) Pd/Si 7 min 30 96
4 H2 (6 eq.) Pd/Si 7 min 30 97
5 H2 (6 eq.) Pd/Si 7 min 60 100b
6 H2 (6 eq.) Pd/Si 14 min 30 94
a

In a batch process.

b

Isolation yield ∼80% or able to use without further purification.

Fig. 1. Hydrogenation of diethyl oximinomalonate (11) in a continuous flow reactor.

Fig. 1

Subsequently, 2-aminomalonamide 2 was obtained in high yield (99%) by treating crude 12 with 28% ammonia in water whereas ammonia in methanol, as indicated in the patent,6 resulted in several unidentified side products (Table S2). 2 and glyoxal were then used for pyrazinamide cyclization in basic condition to provide pyrazinamide salt 13 in a good yield (81%) (Table S3).

Subsequently, the bromination of 13 by batches provided a low to moderate yield (36%) after several optimizations were carried out (Table S4). However, using continuous flow the brominating process of pyrazinamide salt 13 was successful with moderate yield (64%) using only short period of time (Table 2).

Optimization of the bromination reaction and conditions.

graphic file with name d1ra06963b-u2.jpg
Entry Condition Time (min) Yielda (%)
1b Br2 (1 eq.), AcOH (1.2 eq.), ACN, rt 60 36
2 Br2 (3 eq.), ACH, 30 °C 2 48
3 Br2 (4.5 eq.), ACN, 30 °C 2 22
4 Br2 (3 eq.), ACN, 60 °C 2 32
5 Br2 (3 eq.), ACN, 30 °C 4 28
6 Br2 (3 eq.), MeOH, 30 °C 2 44
7 Br2 (3 eq.), ACN, 30 °C 0.55 64
a

Isolated yield.

b

In a batch process.

Notably, the reaction needed to be protected from light as the flow reactor was more transparent than the conventional batch synthesis. Also, the process still required a mixing tube as an auxiliary part to overcome the mass transfer issue (Fig. 2). After obtaining bromopyrazinamide 14 from extraction, it was chlorinated using POCl3 in pyridine to provide dichloro 7 and recrystallized in hexane in a good yield (62%) (Table S5).

Fig. 2. Bromination of sodium 2-carbamoylpyrazine-3-hydroxylate in a continuous flow reactor.

Fig. 2

The last three steps were modified from previous publications and patents.6,11 The reported syntheses revealed only milligram to multigram scale of production.6,7,9–11. Therefore, we optimized the following three steps: first, the fluorination of dichloro 7 was performed using the halex process to provide difluoro 15 in an excellent yield (Table S6). The completion was monitored using TLC and NMR. The completion of difluorination was determined by the disappearance of starting material and monofluorination (Fig. 3). The 1H NMR monitoring indicated that the singlet signal at 8.58 ppm of starting material 7, doublet signal at 8.49 ppm (J = 8.1 Hz) of mono-fluorinated intermediate 15a, doublet signal at 8.46 ppm (J = 1.2 Hz) of mono-fluorinated intermediate 15b and doublet of doublet signal at 8.33 ppm (J = 8.1, 1.4 Hz) of 15. Whereas the 19F NMR monitoring also indicated the singlet signal at −75.34 ppm mono-fluorinated intermediate 15b, singlet signal at −79.39 ppm of mono-fluorinated intermediate 15a and two doublet signals at −77.23 and −81.12 ppm of 15. These NMR signals were useful for optimization and monitoring reaction. In order to complete the reaction, the halex process must be performed in perfluoroalkoxy (PFA) or hastelloy vessel due to the incompatibility of the reaction and glassware.

Fig. 3. (A) Structure of 7, 15a, 15b and 15. (B) 1H NMR (CDCl3) spectra of 7, 15a, 15b and 15. (C) 19F NMR (CDCl3) spectra of 7, 15a, 15b and 15.

Fig. 3

Subsequently, the difluoro 15 was converted into monofluorinated compound 16via substitution reaction in excellent yield (Table S7). Finally, amide hydrolysis was carried out to convert compound 21 into favipiravir in moderate yield (61%) (Table S8). The decolourization using activated charcoal and recrystallization in ethanol provided the crystalline (orthorhombic unite, (CCDC: 2106319) off-white favipiravir. The following characterization revealed more than 98% purity (Fig. S1), 0.13% water content (Table S9), and total heavy metal was lower than 2 ppm (Table S10).

Conclusions

We have demonstrated a total scalable synthesis of favipiravir. The continuous flow chemistry applied in hydrogenation and bromination steps considerably enhances yields. Our overall method provides a satisfactory yield and purity of favipiravir.

Conflicts of interest

There are no conflicts to declare.

Supplementary Material

RA-011-D1RA06963B-s001
RA-011-D1RA06963B-s002

Acknowledgments

This work was financially supported by National Center For Genetic Engineering and Biotechnology (BIOTEC) and Government Pharmaceutical Organization (GPO), grant numbers P2050576 and P2050882, respectively. We are grateful for the access to equipment at GPO, Innovation Institute PTT, BECTHAI, Phenomenex Thailand. We also thank Mr Sutichai Nithithanasilp and Miss Surisa Kongthong for HRMS and NMR data collection. We also had a great discussion with Dr Chaipat Lapinee and Dr Julian Mark Eyears. We are also grateful to Miss Waraporn Pinyo for collecting XRD data. Last, we are thankful for administration work from Ms. Linda Aree.

Electronic supplementary information (ESI) available. CCDC 2106318. For ESI and crystallographic data in CIF or other electronic format see DOI: 10.1039/d1ra06963b

Notes and references

  1. Manabe T. Kambayashi D. Akatsu H. Kudo K. BMC Infect. Dis. 2021;21:489–501. doi: 10.1186/s12879-021-06164-x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  2. Lai C. C. Chao C. M. Hsueh P. R. J. Microbiol., Immunol. Infect. 2021;54:767–775. doi: 10.1016/j.jmii.2021.05.011. [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. De Savi C. Hughes D. L. Kvaerno L. Org. Process Res. Dev. 2020;24:940–976. doi: 10.1021/acs.oprd.0c00233. [DOI] [PubMed] [Google Scholar]
  4. Beldar S. V. Jordis U. Synthesis. 2020;52:3735–3750. doi: 10.1055/s-0040-1707386. [DOI] [Google Scholar]
  5. Titova Y. A. Fedorova O. V. Chem. Heterocycl. Compd. 2020;56:659–662. doi: 10.1007/s10593-020-02715-3. [DOI] [PMC free article] [PubMed] [Google Scholar]
  6. Nippon Soda Co., Ltd, US Pat., 20110275817A1, 2011
  7. Beldar S. V. and Jordis U., Presented in part at the 13th Electronic Conference on Synthetic Organic Chemistry, Institute of Applied Synthetic Chemistry, 2009 [Google Scholar]
  8. Shi F. Li Z. Kong L. Xie Y. Zhang T. Xu W. Drug Discoveries Ther. 2014;8:117–120. doi: 10.5582/ddt.2014.01028. [DOI] [PubMed] [Google Scholar]
  9. Liu F.-L. Li C.-Q. Xiang H.-Y. Feng S. Chem. Pap. 2017;71:2153–2158. doi: 10.1007/s11696-017-0208-6. [DOI] [Google Scholar]
  10. Li M., CN Pat., 107226794A, 2017
  11. Guo Q. Xu M. Guo S. Zhu F. Xie Y. Shen J. Chem. Pap. 2019;73:1043–1051. doi: 10.1007/s11696-018-0654-9. [DOI] [Google Scholar]
  12. Toyamachemical Co. Ltd, US Pat., 20130245264A1, FUJIFILM Corporation, 2013 [Google Scholar]
  13. NIKKEI Asia, accessed April 2021, https://asia.nikkei.com/Spotlight/Coronavirus/Japan-aims-to-make-Avigan-for-coronavirus-minus-imported-material
  14. Antina E. V. Guseva G. B. Loginova A. E. Semeikin A. S. V’yugin A. I. Russ. J. Gen. Chem. 2010;80:2374–2381. doi: 10.1134/S107036321011023X. [DOI] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

RA-011-D1RA06963B-s001
RA-011-D1RA06963B-s002

Articles from RSC Advances are provided here courtesy of Royal Society of Chemistry

RESOURCES