Skip to main content
NCBI home page
RSC Advances logoLink to RSC Advances
. 2020 Mar 3;10(15):8586–8593. doi: 10.1039/d0ra01043j

The synthesis of quinolines via denitrogenative palladium-catalyzed cascade reaction of o-aminocinnamonitriles with arylhydrazines†

Jing Xie 1, Hang Huang 2, Tong Xu 3, Renhao Li 4, Jiuxi Chen 3,✉, Xueting Ye 2,✉
PMCID: PMC9050002  PMID: 35496529

Abstract

The first example of the palladium-catalyzed cascade reaction of o-aminocinnamonitriles with arylhydrazines has been achieved, providing an efficient synthetic pathway to access quinolines with moderate to good yields. Preliminary mechanistic experiments indicate that this cascade process involves sequential denitrogenative addition followed by an intramolecular cyclization.

Pd-catalyzed cascade denitrogenative addition and intramolecular cyclization of o-aminocinnamonitriles with arylhydrazine for the synthesis of quinolines.graphic file with name d0ra01043j-ga.jpg

Introduction

Quinoline derivatives have become increasingly popular in the past few years due to their ubiquity in natural products, bioactive compounds, and other functional molecules. For example, quinoline scaffolds are privileged structures in medicinal chemistry, and therapeutic agents with such cores on the market or in clinical trials for the treatment of urological malignancies such as renal cell carcinoma (e.g., lenvatinib,1 cabozantinib2) and the treatment of head and neck cancer (e.g., camptothecin3) (Fig. 1). Therefore, the development of the effective methods for the synthesis of quinolines has been actively pursued during the past several decades.4 However, less attention has been paid to the preparation of quinolines from nitriles.

Fig. 1. Representative bioactive quinoline derivatives.

Fig. 1

Open in a new tab

Nitriles are well-known as solvents or ligands in organometallic reactions because of the inherently inert nature of the C Created by potrace 1.16, written by Peter Selinger 2001-2019 N bond.5 For example, acetonitrile or benzonitrile are usually used as solvents or ligands in many transition-metal-catalyzed reactions.6 The development of transition-metal-catalyzed inert C Created by potrace 1.16, written by Peter Selinger 2001-2019 N bond activation and further transformation has received significant attention from organic chemists because nitriles are normally very stable and abundant and cheap feedstock chemicals. Substantial progress towards this goal made in recent years, the transition-metal-catalyzed transformation of nitriles offers an attractive route for the synthesis of arylketones or further cyclization products by several other groups.7 Our group also developed transition-metal-catalyzed a series of tandem addition/cyclization reaction of nitriles with organoboron reagents for the synthesis of structurally diverse 5-membered, 6-membered, and 7-membered N-heterocycles.8 In addition, arylhydrazines are used as an important class of molecular building blocks in both synthetic and medicinal chemistry for preparing various nitrogen-containing compounds because of their high reactivity, low cost, and ready availability.9 Recent progresses in the development of using arylhydrazines as aryl source by denitrogenation have been documented.10 Despite the remarkable advances in transition-metal-catalyzed addition reactions of nitriles with arylating reagents into a valuable array of products to date, less attention has been paid to the using arylhydrazines as aryl sources by denitrogenation presumably due to the high dissociation energy from direct activation of the C–N bond.11 To our knowledge, only two examples of denitrogenative palladium-catalyzed reaction of nitriles with arylhydrazines for the synthesis of aryl ketones have been reported (Scheme 1a).12

Scheme 1. Design of new approach to quinolines.

Scheme 1

Open in a new tab

We envisioned that a Pd-catalyzed sequential denitrogenative addition followed by an intramolecular dehydrative cyclization of readily available o-aminocinnamonitriles with arylhydrazines would result in a tandem procedure for the preparation of 2-arylquinolines (Scheme 1b). It is worth noting that the amino group cannot approach the carbonyl group to achieve the intramolecular cyclization because of the steric configuration. Recently, Cheon group developed the synthesis of 2-substituted quinolines by the dehydrative cyclization of 2-aminostyryl ketones.13 These strategies involve the change of unreactive (E)-2-aminostyryl ketones into the unstable but reactive Z-configuration intermediate to undergo dehydrative cyclization reaction by using iodide13a or benzylamine13b as the nucleophilic catalyst. Recently, we reported the Pd-catalyzed tandem reaction of 2-aminostyryl nitriles with arylboronic acids for the synthesis of 2-arylquinolines.14 As part of the continuing efforts in our laboratory toward the development of novel transformations of nitriles,8,14 we herein report the first example of the denitrogenative Pd-catalyzed cascade reaction of o-aminocinnamonitriles with arylhydrazines to afford 2-arylquinolines (Scheme 1b).

Results and discussion

We begin our investigation with readily available (E)-3-(2-aminophenyl)but-2-enenitrile (1a) and phenylhydrazine (2a) for the optimization of reaction conditions (Table 1).

Optimization of reaction conditionsa.

graphic file with name d0ra01043j-u1.jpg
Entry [Pd] Ligand Additive Solvent Yieldb (%)
1 Pd(PPh3)4 L1 TFA THF 0
2 Pd(OM)2 L1 TFA THF 12
3 Pd(CF3CO2)2 L1 TFA THF 19
4 Pd(PPh3)2Cl2 L1 TFA THF 17
5 PdCl2 L1 TFA THF 31
6 Pd2(dba)3 L1 TFA THF 21
7 Pd(acac)2 L1 TFA THF 23
8 PdCl2 L1 TFA 2-MeTHF 37
9 PdCl2 L1 TFA DMF 41
10 PdCl2 L1 TFA DMA 47
11 PdCl2 L1 TFA 1,4-Dioxane 23
12 PdCl2 L1 TFA Toluene 56
13 PdCl2 L1 TFA H2O 18
14 PdCl2 L2 TFA Toluene 53
15 PdCl2 L3 TFA Toluene 51
16 PdCl2 L4 TFA Toluene Trace
17 PdCl2 L5 TFA Toluene Trace
18 PdCl2 L6 TFA Toluene 41
19 PdCl2 L7 TFA Toluene 51
20 PdCl2 L1 AcOH Toluene Trace
21 PdCl2 L1 TsOH·H2O Toluene 33
22 PdCl2 L1 MsOH Toluene 21
23 PdCl2 L1 TfOH Toluene 79(81)c
24 L1 TfOH Toluene 0
25 PdC12 TfOH Toluene 0
Open in a new tab
a

Conditions: 1a (0.3 mmol), 2a (0.6 mmol), Pd catalyst (10 mol%), ligand (20 mol%), additive (2 equiv.), solvent (2 mL), 90 °C, 24 h, air.

b

Isolated yield.

c

Under O2.

We initially found that the desired product 2-phenylquinoline (3a) could be obtained in 12% yield under the combination of Pd(OAc)2, trifluoroacetic acid (TFA) and 2,2′-bipyridine (L1) in THF under air atmosphere (entry 2). Various palladium catalysts were tested (entries 3–7) and PdCl2 exhibited the highest catalytic reactivity in 31% yield (entry 5). Delightedly, the yield of 3a could be improved to 56% using toluene as the solvent. Other solvents, including DMF, dimethylacetamide (DMA), 1,4-dioxane and H2O were less efficient (entries 8–13). Replacement of L1 with other bidentate N-ligands (entries 13–19), resulted in lower yields. However, trace amounts of 3a was detected when sterically hindered ligands, such as 6,6′-dimethyl-2,2′-bipyridine (L4) and 2,9-dimethyl-1,10-phenanthroline (L5) were used (entries 16–17). An investigation of the effect of additive revealed that the yield of 3a was greatly increased to 81% under O2 atmosphere (entry 23). The product 3a was not observed if either Pd catalyst or ligand was absent (entries 24 and 25).

Having the optimized reaction conditions in hand, we examined the substrates scope of this cascade reaction. First, the cascade reaction of (E)-3-(2-aminophenyl)but-2-enenitrile (1a) with different arylhydrazines were evaluated under optimized conditions (Table 2). The reactivities of para-, meta-, and ortho-tolylhydrazine were evaluated, and the results demonstrated that the steric effect of the substituent had an obvious impact on the reaction. For example, the reactions of 1a with para- and meta-tolylhydrazine afforded 85% and 79% yields of 3b and 3c, respectively, while the ortho-tolylhydrazine gave the desired product 3d with a diminished yield of 52%. Moderately electron-withdrawing halogens, such as fluoro (3e–3f), chloro (3g), and bromo (3h) groups, were compatible with this reaction, providing 42–76% yields. The substrate bearing a strong electron-withdrawing group (e.g., CF3) could also be well tolerated, albeit giving the desired 3i in a slightly lower yield.

Denitrogenative Pd-catalyzed cascade reaction of 1a with arylhydrazinesa.

graphic file with name d0ra01043j-u2.jpg
Open in a new tab
a

Conditions: 1a (0.3 mmol), 2 (0.6 mmol), PdCl2 (10 mol%), L1 (20 mol%), toluene (2 mL), TfOH (2 equiv.), 90 °C, 24 h, O2, isolated yield.

We next turned our attention to the effect of the reactions between substituted o-aminocinnamonitriles (1) and phenylhydrazine (2a) under standard conditions (Table 3). First, the influence of a variety of functional groups (R1) on the phenyl ring of the 2-(benzylideneamino)benzonitriles was evaluated. Both electron-donating groups, such as methyl (3j) and methoxy (3k) moieties, and electron-withdrawing groups, such as fluoro (3l–3m), chloro (3n–3p) and bromo (3q) moieties, were also compatible, affording the corresponding desired products with moderate to good yields. Treatment of a strong electron-withdrawing trifluoromethyl substituent with 2a delivered product 3r in 36% yield. Finally, several representative examples of substituents (R2) on the carbon–carbon double bond were investigated. The R2-substituted products 3t, 3u and 3u was obtained in 71%, 62% and 57% yields, respectively, compared to relatively low yield of the product 3s in 51% yield. It is worth noting that the presence of the halogen in the products (e.g., 3h, 3q) is very useful for further synthetic elaborations by cross-coupling reaction thereby broadening the diversity of the products.

Denitrogenative Pd-catalyzed reaction of o-aminocinnamonitriles with arylhydrazinesa.

graphic file with name d0ra01043j-u3.jpg
Open in a new tab
a

Conditions: 1 (0.3 mmol), 2 (0.6 mmol), PdCl2 (10 mol%), L1 (20 mol%), toluene (2 mL), TfOH (2 equiv.), 90 °C, 24 h, O2, isolated yield.

To gain insight into the mechanism of this cascade reaction, several control experiments were conducted (Scheme 2). The desired product 3a was not detected when the reaction was performed under N2 atmosphere (Scheme 2a), which revealed that the reaction required the presence of oxygen. As expected, the reactions of (E)-3-(2-aminophenyl)-1-phenylprop-2-en-1-one (4a) under optimized conditions in the absence of phenylhydrazine achieved the product 2-phenylquinoline (3r) in 72% yield, indicating that 4a was proposed as a possible intermediate for this transformation (Scheme 2b). The cyclization of 4a gave the desired product 3r in 65% yield in the absence of TfOH (Scheme 2c). The cyclization of 4a could also proceed to afford 3r in 63% yield in the absence of PdCl2/L1 (Scheme 2d). However, we attempted to perform the reaction in the absence of palladium catalyst and additive failed to give 3r (Scheme 2e).

Scheme 2. Control experiments.

Scheme 2

Open in a new tab

On the basis of the above experimental results and previous reports,12a a possible reaction mechanism for the formation of quinolines is shown in Scheme 3. The first step may involve metathesis between the palladium catalyst and arylhydrazide to form the palladiaziridine intermediate A, which is followed by the coordination of cyano group affording intermediate B. Oxidative addition of the intermediate B to palladium(0) species to give the corresponding two palladium(ii) centered intermediate Cvia C–N bond cleavage. Thereafter, cracking of the intermediate C gives the intermediate D and the palladiaziridine intermediate E, which would be decomposed into palladium(0), N2 and H2O in the presence of oxygen. Then, carbopalladation of the cyano group affords the imine-Pd intermediate F. Protonation of F by TfOH gives the imine intermediate G and regenerates palladium(ii) species. Hydrolysis of G under acidic conditions would deliver the ketone intermediate H. Finally, the ketone intermediate H undergoes C–C bond E/Z configurational tautomerization to give I in the presence of TfOH and/or palladium(ii) species, which is followed by intramolecular cyclization to generate the desired quinolines 3.

Scheme 3. Plausible reaction mechanism for the formation of quinolines.

Scheme 3

Open in a new tab

Conclusions

In summary, we have developed a new and complementary strategy for the synthesis of 2-arylquinolines in moderate to good yields by palladium-catalyzed cascade denitrogenative addition and intramolecular cyclization of o-aminocinnamonitriles with arylhydrazines.

Experimental section

General methods

Melting points are uncorrected. 1H NMR and 13C NMR spectra were measured on a 500 MHz spectrometer using CDCl3 as the solvent with tetramethylsilane (TMS) as an internal standard at room temperature. Chemical shifts are given n δ relative to TMS, and the coupling constants J are given in hertz. The starting materials o-aminocinnamonitriles15 and 4a16 were synthesized according to the method described in the literatures. Column chromatography was performed using EM silica gel 60 (300–400 mesh).

General procedure for the synthesis of quinolines

Under O2 atmosphere, a Teflon-valve-sealed Schlenk tube was charged with o-aminocinnamonitriles and arylhydrazines, PdCl2, L1, TfOH and toluene at room temperature. The reaction mixture was stirred for 10 minutes at room temperature for proper mixing of the reactants, and then heated at 90 °C (oil bath) with vigorous stirring for 24 hours. After the reaction equilibrium, the mixture was poured into ethyl acetate, which was washed with saturated NaHCO3 (2 × 10 mL) and then brine (10 mL). The aqueous layer was extracted with ethyl acetate, the combined organic layers were dried over anhydrous Na2SO4 and evaporated under vacuum. The residue was purified by flash column chromatography (hexane/ethyl acetate) to afford the desired products.

4-Methyl-2-phenylquinoline (3a)17

White solid (53.2 mg, 81%), mp 62–63 °C. 1H-NMR (500 MHz, CDCl3) δ 8.22 (d, J = 10.5 Hz, 1H), 8.19–8.17 (m, 2H), 7.97 (d, J = 10.5 Hz, 1H), 7.75–7.70 (m, 2H), 7.56–7.52 (m, 3H), 7.49–7.46 (m, 1H), 2.73 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 157.0, 148.2, 144.8, 139.8, 130.3, 129.3, 129.2, 128.8, 127.6, 127.3, 126.0, 123.6, 119.7, 19.0.

4-Methyl-2-(p-tolyl)quinoline (3b)18

Yellow oil (59.4 mg, 85%). 1H-NMR (500 MHz, CDCl3) δ 8.20 (d, J = 10.5 Hz, 1H), 8.09–8.07 (m, 2H), 7.98 (d, J = 10.0 Hz, 1H), 7.74–7.70 (m, 2H), 7.55–7.51 (m, 1H), 7.34 (d, J = 10.0 Hz, 2H), 2.74 (s, 3H), 2.45 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 157.0, 148.1, 144.7, 139.3, 136.9, 130.2, 129.5, 129.3, 127.4, 127.2, 125.9, 123.6, 119.6, 21.3, 19.0.

4-Methyl-2-(m-tolyl)quinoline (3c)18

Yellow oil (55.2 mg, 79%). 1H-NMR (500 MHz, CDCl3) δ 8.22 (d, J = 8.0 Hz, 1H), 8.02–7.98 (m, 2H), 7.94 (d, J = 8.0 Hz, 1H), 7.74–7.70 (m, 2H), 7.56–7.52 (m, 1H), 7.44–7.41 (m, 1H), 7.29 (d, J = 7.5 Hz, 1H), 2.75 (s, 3H), 2.50 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 157.3, 148.1, 144.7, 139.8, 138.4, 130.3, 130.0, 129.3, 128.7, 128.3, 127.3, 126.0, 124.7, 123.6, 119.9, 21.6, 19.0.

4-Methyl-2-(o-tolyl)quinoline (3d)19

Yellow oil (36.3 mg, 52%). 1H NMR (500 MHz, CDCl3) δ 8.20 (d, J = 8.5 Hz, 1H), 8.04–8.03 (m, 1H), 7.76–7.73 (m, 1H), 7.60–7.57 (m, 1H), 7.51–7.49 (m, 1H), 7.39 (s, 1H), 7.37–7.31 (m, 3H), 2.76 (s, 3H), 2.43 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 160.3, 147.9, 144.3, 140.5, 136.0, 130.3, 130.0, 129.6, 129.3, 128.3, 126.0, 123.6, 123.1, 20.3, 18.8.

2-(4-Fluorophenyl)-4-methylquinoline (3e)20

Yellow oil (54.1 mg, 76%). 1H-NMR (500 MHz, CDCl3) δ 8.18 (d, J = 10.5 Hz, 1H), 7.99 (d, J = 10.5 Hz, 1H), 7.92–7.90 (m, 2H), 7.75–7.71 (m, 1H), 7.67 (s, 1H), 7.58–7.54 (m, 1H), 7.50–7.45 (m, 1H), 7.17–7.13 (m, 1H), 2.76 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 163.8 (d, J = 247.5 Hz), 155.9, 148.1, 145.0, 135.9 (d, J = 2.5 Hz), 130.2, 129.4, 129.3 (d, J = 7.5 Hz), 127.2, 126.1, 123.6, 119.4, 115.7 (d, J = 22.5 Hz), 19.0.

2-(3-Fluorophenyl)-4-methylquinoline (3f)21

Yellow oil (44.8 mg, 63%). 1H-NMR (500 MHz, CDCl3) δ 8.18 (m, 3H), 7.86–7.85 (m, 1H), 7.61–7.50 (m, 2H), 7.43–7.42 (m, 1H), 7.09–7.07 (m, 2H), 2.62 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 163.4 (d, J = 243.8 Hz), 155.5 (d, J = 2.5 Hz), 148.0, 145.1, 142.1 (d, J = 7.5 Hz), 130.4, 130.2 (d, J = 8.8 Hz), 129.5, 127.4, 126.4, 123.6, 123.0 (d, J = 3.8 Hz), 119.4, 116.0 (d, J = 21.3 Hz), 114.4 (d, J = 22.5 Hz), 19.0.

2-(4-Chlorophenyl)-4-methylquinoline (3g)22

White solid (38.8 mg, 51%), mp 73–74 °C. 1H-NMR (500 MHz, CDCl3) δ 8.16 (d, J = 10.5 Hz, 1H), 8.11–8.09 (m, 2H), 7.98 (d, J = 10.5 Hz, 1H), 7.74–7.70 (m, 1H), 7.65 (s, 1H), 7.57–7.53 (m, 1H), 7.49–7.47 (m, 2H), 2.74 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 155.5, 147.9, 144.9, 138.0, 135.3, 130.1, 129.4, 128.8, 128.6, 126.2, 126.1, 123.5, 119.1, 18.8.

2-(4-Bromophenyl)-4-methylquinoline (3h)21

White solid (37.5 mg, 42%), mp 66–67 °C. 1H-NMR (500 MHz, CDCl3) δ 8.22–8.15 (m, 2H), 8.05–8.03 (m, 1H), 8.00–7.98 (m, 1H), 7.74–7.71 (m, 1H), 7.66–7.63 (m, 2H), 7.57–7.51 (m, 2H), 2.77–2.76 (m, 3H); 13C-NMR (125 MHz, CDCl3) δ 155.3, 148.0, 145.2, 141.8, 132.1, 130.6, 130.4, 130.3, 129.6, 127.4, 126.4, 126.1, 123.7, 123.1, 119.5, 19.0.

4-Methyl-2-(4-(trifluoromethyl)phenyl)quinoline (3i)23

Yellow oil (22.4 mg, 26%). 1H-NMR (500 MHz, CDCl3) δ 8.27 (d, J = 8.0 Hz, 2H), 8.20 (d, J = 8.5 Hz, 1H), 8.02 (d, J = 8.0 Hz, 1H), 7.78–7.24 (m, 4H), 7.60–7.57 (m, 1H), 2.79 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 155.5, 148.0, 145.5, 143.0, 131.0 (d, J = 32.5 Hz), 130.4, 129.7, 127.9, 127.5, 126.6, 125.7 (q, J = 3.8 Hz), 124.2 (d, J = 270.0 Hz), 123.7, 119.6, 19.0.

6-Methyl-2-phenylquinoline (3j)24

White solid (42.7 mg, 65%), mp 68–69 °C. 1H NMR (500 MHz, CDCl3) δ 8.18–8.16 (m, 2H), 8.10 (d, J = 11.0 Hz, 2H), 7.82 (d, J = 11.0 Hz, 1H), 7.57–7.52 (m, 4H), 7.48–7.45 (m, 1H), 2.55 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 156.5, 146.8, 139.8, 136.2, 136.1, 132.0, 129.4, 129.2, 128.8, 127.5, 127.2, 126.3, 119.0, 21.6.

6-Methoxy-2-phenylquinoline (3k)25

White solid (36.7 mg, 52%), mp 125–126 °C. 1H-NMR (500 MHz, CDCl3) δ 8.15–8.14 (m, 1H), 8.13 (s, 1H), 8.11 (d, J = 6.0 Hz, 1H), 8.08 (d, J = 6.0 Hz, 1H), 7.83 (d, J = 11.5 Hz, 1H), 7.52 (dd, J1 = 9.5 Hz, J2 = 9.0 Hz, 2H), 7.45 (d, J = 9.5 Hz, 1H), 7.39 (dd, J1 = 3.5 Hz, J2 = 11.5 Hz, 1H), 7.08 (d, J = 3.5 Hz, 1H), 3.94 (s, 3H); 13C-NMR (125 MHz, CDCl3) δ 157.8, 155.0, 144.4, 139.8, 135.5, 131.2, 128.9, 128.8, 128.2, 127.3, 122.3, 119.2, 105.1, 55.5.

6-Fluoro-2-phenylquinoline (3l)16

White solid (41.5 mg, 62%), mp 94–95 °C. 1H-NMR (500 MHz, CDCl3) δ 8.21–8.19 (m, 2H), 8.17–8.15 (m, 2H), 7.91 (d, J = 10.5 Hz, 1H), 7.56–7.44 (m, 5H); 13C-NMR (125 MHz, CDCl3) δ 160.4 (d, J = 248.0 Hz), 156.7 (d, J = 2.8 Hz), 145.3, 139.2, 136.2 (d, J = 5.2 Hz), 132.1 (d, J = 9.1 Hz), 129.5, 128.9, 127.7 (d, J = 10.0 Hz), 127.5, 119.9 (d, J = 25.7 Hz), 119.7, 110.5 (d, J = 21.7 Hz).

7-Fluoro-2-phenylquinoline (3m)25

White solid (38.8 mg, 58%), mp 88–89 °C. 1H-NMR (500 MHz, CDCl3) δ 8.22 (d, J = 8.0 Hz, 1H), 8.16 (d, J = 7.5 Hz, 2H), 7.86–7.80 (m, 3H), 7.56–7.53 (m, 2H), 7.50–7.47 (m, 1H), 7.34–7.30 (m, 1H); 13C-NMR (125 MHz, CDCl3) δ 163.3 (d, J = 249.6 Hz), 158.3, 149.3 (d, J = 12.9 Hz), 139.3, 136.6, 129.6, 129.4 (d, J = 10.0 Hz), 128.9, 127.6, 124.2, 118.3 (d, J = 2.5 Hz), 116.7 (d, J = 25.5 Hz), 113.3 (d, J = 20.2 Hz).

6-Chloro-2-phenylquinoline (3n)26

White solid (40.3 mg, 56%), mp 109–110 °C. 11H-NMR (500 MHz, CDCl3) δ 8.16–8.11 (m, 4H), 7.89 (d, J = 9.0 Hz, 1H), 7.84–7.80 (m, 1H), 7.66 (d, J = 9.0 Hz, 1H), 7.55–7.52 (m, 2H), 7.49–7.47 (m, 1H); 13C-NMR (125 MHz, CDCl3) δ 157.5, 146.6, 139.2, 135.8, 132.0, 131.3, 130.6, 129.6, 128.9, 127.7, 127.5, 126.1, 119.8.

6-Chloro-2-(p-methoxyphenyl)quinoline (3o)27

Pale yellow solid (18.6 mg, 23%), mp 156–158 °C. 1H NMR (500 MHz, CDCl3) δ 8.14 (d, J = 8.5 Hz, 2H), 8.08 (d, J = 8.5 Hz, 2H), 7.85 (d, J = 8.5 Hz, 1H), 7.77 (s, 1H), 7.64 (d, J = 9.0 Hz, 1H), 7.05 (d, J = 8.5 Hz, 2H), 3.89 (s, 3H); 13C NMR (125 MHz, CDCl3) δ 161.1, 157.1, 146.6, 135.7, 131.5, 131.0, 130.5, 128.9, 127.5, 126.1, 119.3, 114.3, 55.4.

7-Chloro-2-phenylquinoline (3p)28

White solid (38.8 mg, 54%), mp 106–107 °C. 1H-NMR (500 MHz, CDCl3) δ 8.21–8.15 (m, 4H), 7.89–7.87 (m, 1H), 7.77–7.75 (m, 1H), 7.56–7.48 (m, 4H); 13C-NMR (125 MHz, CDCl3) δ 158.2, 148.5, 139.0, 136.7, 135.6, 129.7, 128.9, 128.7, 128.6, 127.6, 127.4, 125.5, 119.2.

6-Bromo-2-phenylquinoline (3q)27

White solid (34.9 mg, 41%), mp 113–114 °C. 1H-NMR (500 MHz, CDCl3) δ 8.15 (d, J = 8.0 Hz, 2H), 8.10–8.09 (m, 1H), 8.04 (d, J = 8.0 Hz, 1H), 7.96 (s, 1H), 7.88–7.86 (m, 1H), 7.79–7.77 (m, 1H), 7.55–7.52 (m, 2H), 7.50–7.47 (m, 1H); 13C-NMR (125 MHz, CDCl3) δ 157.6, 146.8, 139.1, 135.8, 133.1, 131.4, 129.6, 129.5, 128.9, 128.2, 127.5, 120.0, 119.7.

2-Phenyl-6-(trifluoromethyl)quinoline (3r)29

White solid (29.5 mg, 36%), mp 118–119 °C. 1H-NMR (500 MHz, CDCl3) δ 8.26 (d, J = 10.0 Hz, 2H), 8.20–8.17 (m, 2H), 8.12 (s, 1H), 7.94 (d, J = 10.0 Hz, 1H), 7.90–7.88 (m, 1H), 7.58–7.51 (m, 3H); 13C-NMR (125 MHz, CDCl3) δ 159.3, 149.3, 138.9, 137.4, 130.9, 130.0, 129.0, 128.2, 127.9, 127.7, 126.1, 125.4 (q, J = 3.8 Hz), 125.3 (q, J = 3.8 Hz), 123.1, 120.0.

2-Phenylquinoline (3s)30

White solid (31.4 mg, 51%), mp 84–85 °C. 1H-NMR (500 MHz, CDCl3) δ 8.24–8.17 (m, 4H), 7.89 (d, J = 10.0 Hz, 1H), 7.84 (d, J = 10.0 Hz, 1H), 7.76–7.72 (m, 1H), 7.56–7.52 (m, 3H), 7.49–7.46 (m, 1H); 13C-NMR (125 MHz, CDCl3) δ 157.4, 148.3, 139.6, 136.8, 129.7, 129.6, 129.4, 128.8, 127.6, 127.4, 127.2, 126.3, 119.0.

4-Ethyl-2-phenylquinoline (3t)20

Yellow oil (49.6 mg, 71%). 1H-NMR (500 MHz, CDCl3) δ 8.22 (d, J = 10.5 Hz, 1H), 8.18–8.17 (m, 2H), 8.04 (d, J = 10.5 Hz, 1H), 7.74–7.70 (m, 2H), 7.56–7.52 (m, 3H), 7.49–7.46 (m, 1H), 3.17 (q, J = 9.5 Hz, 2H), 1.45 (t, J = 9.5 Hz, 3H); 13C-NMR (125 MHz, CDCl3) δ 157.3, 150.4, 148.5, 140.1, 130.6, 129.2, 128.8, 127.6, 126.4, 126.0, 123.2, 117.8, 25.4, 14.2.

4-Isopropyl-2-phenylquinoline (3u)31

Yellow oil (45.9 mg, 62%). 1H-NMR (500 MHz, CDCl3) δ 8.21 (d, J = 10.5 Hz, 1H), 8.17–8.15 (m, 2H), 8.11 (d, J = 10.5 Hz, 1H), 7.79 (s, 1H), 7.73–7.70 (m, 1H), 7.57–7.52 (m, 3H), 7.49–7.45 (m, 1H), 3.84–3.77 (m, 1H), 1.48 (d, J = 9.0 Hz, 6H); 13C-NMR (125 MHz, CDCl3) δ 157.4, 154.9, 148.6, 140.3, 130.7, 129.1, 129.0, 128.8, 127.6, 125.9, 125.8, 122.9, 114.9, 28.6, 23.0.

2,4-Diphenylquinoline (3v)32

White solid (48.1 mg, 57%), mp 104–105 °C. 1H-NMR (500 MHz, CDCl3) δ 8.28 (d, J = 10.5 Hz, 1H), 8.21–8.19 (m, 2H), 7.92 (d, J = 10.5 Hz, 1H), 7.83 (s, 1H), 7.77–7.73 (m, 1H), 7.57–7.55 (m, 4H), 7.54–7.48 (m, 5H); 13C-NMR (125 MHz, CDCl3) δ 156.9, 149.4, 148.7, 139.6, 138.4, 130.0, 129.6, 129.4, 128.8, 128.6, 128.4, 127.6, 126.4, 125.8, 125.7, 119.4.

Conflicts of interest

There are no conflicts of interest to declare.

Supplementary Material

RA-010-D0RA01043J-s001

Acknowledgments

We thank the National Natural Science Foundation of China (No. 21572162) and the Natural Science Foundation of Zhejiang Province (No. LY20B020015) for financial support.

†

Electronic supplementary information (ESI) available: 1H and 13C NMR spectra for products. See DOI: 10.1039/d0ra01043j

References

  1. Študentová H. Vitáskováand D. Melichar B. Lenvatinib for the treatment of kidney cancer. Expert Rev. Anticancer Ther. 2018;18:511–518. doi: 10.1080/14737140.2018.1470506. [DOI] [PubMed] [Google Scholar]
  2. Abdelaziz A. Vaishampayan U. Cabozantinib for the treatment of kidney cancer. Expert Rev. Anticancer Ther. 2017;17:577–584. doi: 10.1080/14737140.2017.1344553. [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. Liu Y. Li W. Morris-Natschke S. L. Qian K. Yang L. Zhu G. Wu X. Chen A. Zhang S. Nan X. Lee K. Perspectives on biologically active camptothecin derivatives. Med. Res. Rev. 2015;35:753–789. doi: 10.1002/med.21342. [DOI] [PMC free article] [PubMed] [Google Scholar]
  4. For selected reviews, see: ; (a) Marco-Contelles J. Perez-Mayoral E. Samadi A. Carreiras M. C. Soriano E. Recent advances in the Friedländer reaction. Chem. Rev. 2009;109:2652–2671. doi: 10.1021/cr800482c. [DOI] [PubMed] [Google Scholar]; (b) Prajapati S. M. Patel K. D. Vekariya R. H. Panchal S. N. Patel H. D. Recent advances in the synthesis of quinolines: a review. RSC Adv. 2014;4:24463–24476. doi: 10.1039/C4RA01814A. [DOI] [Google Scholar]; (c) Kouznetsov V. Mendez L. Gomez C. Recent progress in the synthesis of quinolines. Curr. Org. Chem. 2005;9:141–161. doi: 10.2174/1385272053369196. [DOI] [Google Scholar]; (d) Nainwal L. M. Tasneem S. Akhtar W. Verma G. Khan M. F. Parvez S. Shaquiquzzaman M. Akhter M. Alam M. M. Green recipes to quinoline: a review. Eur. J. Med. Chem. 2019;164:121–170. doi: 10.1016/j.ejmech.2018.11.026. [DOI] [PubMed] [Google Scholar]
  5. (a) Fleming F. F. Wang Q. Unsaturated nitriles:  conjugate additions of carbon nucleophiles to a recalcitrant class of acceptors. Chem. Rev. 2003;103:2035–2078. doi: 10.1021/cr020045d. [DOI] [PubMed] [Google Scholar]; (b) Kukushkin V. Y. Pombeiro A. J. L. Additions to metal-activated organonitriles. Chem. Rev. 2002;102:1771–1802. doi: 10.1021/cr0103266. [DOI] [PubMed] [Google Scholar]; (c) Enders D. Shilvock J. P. Some recent applications of α-amino nitrile chemistry. Chem. Soc. Rev. 2000;29:359–373. doi: 10.1039/A908290E. [DOI] [Google Scholar]
  6. Rach S. F. Kühn F. E. Nitrile ligated transition metal complexes with weakly coordinating counteranions and their catalytic applications. Chem. Rev. 2009;109:2061–2080. doi: 10.1021/cr800270h. [DOI] [PubMed] [Google Scholar]
  7. (a) Larock R. C. Tian Q. P. Pletnev A. A. Carbocycle synthesis via carbopalladation of nitriles. J. Am. Chem. Soc. 1999;121:3238–3239. doi: 10.1021/ja984086w. [DOI] [Google Scholar]; (b) Zhou C. Larock R. C. Synthesis of aryl ketones by the Pd-catalyzed C–H activation of arenes and intermolecular carbopalladation of nitriles. J. Am. Chem. Soc. 2004;126:2302–2303. doi: 10.1021/ja038687l. [DOI] [PubMed] [Google Scholar]; (c) Lindh J. Sjöberg P. J. R. Larhed M. Synthesis of aryl ketones by palladium(ii)-catalyzed decarboxylative addition of benzoic acids to nitriles. Angew. Chem., Int. Ed. 2010;49:7733–7737. doi: 10.1002/anie.201003009. [DOI] [PubMed] [Google Scholar]; (d) Wang X. Liu M. Xu L. Wang Q. Chen J. Ding J. Wu H. Palladium-catalyzed addition of potassium aryltrifluoroborates to aliphatic nitriles: synthesis of alkyl aryl ketones, diketone compounds, and 2-arylbenzo[b]furans. J. Org. Chem. 2013;78:5273–5281. doi: 10.1021/jo400433m. [DOI] [PubMed] [Google Scholar]; (e) Reeves J. T. Malapit C. A. Buono F. G. Sidhu K. P. Marsini M. A. Sader C. A. Fandrick K. R. Busacca C. A. Senanayake C. H. Transnitrilation from dimethylmalononitrile to aryl Grignard and lithium reagents: a practical method for aryl nitrile synthesis. J. Am. Chem. Soc. 2015;137:9481–9488. doi: 10.1021/jacs.5b06136. [DOI] [PubMed] [Google Scholar]; (f) Malapit C. A. Reeves J. T. Busacca C. A. Howell A. R. Senanayake C. H. Rhodium-catalyzed transnitrilation of aryl boronic acids with dimethylmalononitrile. Angew. Chem., Int. Ed. 2016;55:326–330. doi: 10.1002/anie.201508122. [DOI] [PubMed] [Google Scholar]; (g) Malapit C. A. Caldwell D. R. Luvaga I. K. Reeves J. T. Volchkov I. Gonnella N. C. Han Z. S. Busacca C. A. Howell A. R. Senanayake C. H. Rhodium-catalyzed addition of aryl boronic acids to 2,2-disubstituted malononitriles. Angew. Chem., Int. Ed. 2017;56:6999–7002. doi: 10.1002/anie.201703471. [DOI] [PubMed] [Google Scholar]; (h) Meng M. Yang L. Cheng K. Qi C. Pd(ii)-catalyzed denitrogenative and desulfinative addition of arylsulfonyl hydrazides with nitriles. J. Org. Chem. 2018;83:3275–3284. doi: 10.1021/acs.joc.8b00211. [DOI] [PubMed] [Google Scholar]; (i) Mills L. R. Graham J. M. Patel P. Rousseaux S. A. L. Ni-catalyzed reductive cyanation of aryl halides and phenol derivatives via transnitrilation. J. Am. Chem. Soc. 2019;141:19257–19262. doi: 10.1021/jacs.9b11208. [DOI] [PubMed] [Google Scholar]
  8. (a) Qi L. Li R. Yao X. Zhen Q. Ye P. Shao Y. Chen J. Syntheses of pyrroles, pyridines, and ketonitriles via catalytic carbopalladation of dinitriles. J. Org. Chem. 2020;85:1097–1108. doi: 10.1021/acs.joc.9b02999. [DOI] [PubMed] [Google Scholar]; (b) Zhen Q. Li R. Qi L. Hu K. Yao X. Shao Y. Chen J. Nickel(ii)-catalyzed C–C, N–C cascade coupling of ketonitriles into substituted pyrroles and pyridines. Org. Chem. Front. 2020;7:286–291. doi: 10.1039/C9QO01259A. [DOI] [Google Scholar]; (c) Yao X. Shao Y. Hu M. Xia Y. Cheng T. Chen J. Palladium-catalyzed cascade reaction of o-cyanobiaryls with arylboronic acids: synthesis of 5-arylidene-7-aryl-5H-dibenzo[c,e]azepines. Org. Lett. 2019;21:7697–7701. doi: 10.1021/acs.orglett.9b02351. [DOI] [PubMed] [Google Scholar]; (d) Hu K. Zhen Q. Gong J. Cheng T. Qi L. Shao Y. Chen J. Palladium-catalyzed three-component tandem process: one-pot assembly of quinazolines. Org. Lett. 2018;20:3083–3087. doi: 10.1021/acs.orglett.8b01070. [DOI] [PubMed] [Google Scholar]; (e) Zhang Y. Shao Y. Gong J. Hu K. Cheng T. Chen J. Palladium-catalyzed tandem reaction of quinazolinone-based nitriles with arylboronic acids: synthesis of 2-(4-arylquinazolin-2-yl)anilines. Adv. Synth. Catal. 2018;360:3260–3265. doi: 10.1002/adsc.201800615. [DOI] [Google Scholar]; (f) Hu K. Qi L. Yu S. Cheng T. Wang X. Li Z. Xia Y. Chen J. Wu H. Efficient synthesis of isoquinolines in water by a Pd-catalyzed tandem reaction of functionalized alkylnitriles with arylboronic acids. Green Chem. 2017;19:1740–1750. doi: 10.1039/C7GC00267J. [DOI] [Google Scholar]; (g) Qi L. Hu K. Yu S. Zhu J. Cheng T. Wang X. Chen J. Wu H. Tandem addition/cyclization for access to isoquinolines and isoquinolones via catalytic carbopalladation of nitriles. Org. Lett. 2017;19:218–221. doi: 10.1021/acs.orglett.6b03499. [DOI] [PubMed] [Google Scholar]; (h) Yu S. Qi L. Hu K. Gong J. Cheng T. Wang Q. Chen J. Wu H. The development of a palladium-catalyzed tandem addition/cyclization for the construction of indole skeletons. J. Org. Chem. 2017;82:3631–3638. doi: 10.1021/acs.joc.7b00148. [DOI] [PubMed] [Google Scholar]; (i) Yao X. Shao Y. Hu M. Zhang M. Li S. Xia Y. Cheng T. Chen J. Palladium-catalyzed selective synthesis of dibenzo[c,e]azepin-5-ols and benzo[c]pyrido[2,3-e]azepin-5-ols. Adv. Synth. Catal. 2019;361:4707–4713. doi: 10.1002/adsc.201900705. [DOI] [Google Scholar]; (j) Xiong W. Hu K. Lei Y. Zhen Q. Zhao Z. Shao Y. Li R. Zhang Y. Chen J. Palladium-catalyzed cascade reactions of 2-(cyanomethoxy)chalcones with arylboronic acids: selective synthesis of emissive benzofuro[2,3-c]pyridines. Org. Lett. 2020;22(4):1233–1238. doi: 10.1021/acs.orglett.9b04185. [DOI] [PubMed] [Google Scholar]
  9. (a) Li H. Zhang S. Feng X. Yu X. Yamamoto Y. Bao M. Rhodium(iii)-catalyzed oxidative [3+2] annulation of 2-acetyl-1-arylhydrazines with maleimides: synthesis of pyrrolo[3,4-b]indole-1,3-diones. Org. Lett. 2019;21:8563–8567. doi: 10.1021/acs.orglett.9b03107. [DOI] [PubMed] [Google Scholar]; (b) Lv N. Chen Z. Liu Z. Zhang Y. Redox-neutral rhodium(iii)-catalyzed annulation of arylhydrazines with sulfoxonium ylides to synthesize 2-arylindoles. J. Org. Chem. 2019;84:13013–13021. doi: 10.1021/acs.joc.9b01815. [DOI] [PubMed] [Google Scholar]; (c) Pirzer A. S. Alvarez E.-M. Friedrich H. Heinrich M. R. Radical carbofluorination of alkenes with arylhydrazines and selectfluor: additives, mechanistic pathways, and polar effects. Chem.–Eur. J. 2019;25:2786–2792. doi: 10.1002/chem.201805256. [DOI] [PubMed] [Google Scholar]; (d) Li R. Chen X. Wei S. Sun K. Fan L. Liu Y. Qu L. Zhao Y. Yu B. A Visible-light-promoted metal-free strategy towards arylphosphonates: organic-dye-catalyzed phosphorylation of arylhydrazines with trialkylphosphites. Adv. Synth. Catal. 2018;360:4807–4813. doi: 10.1002/adsc.201801122. [DOI] [Google Scholar]; (e) Tu Y. Zhang Z. Wang T. Ke J. Zhao J. A regioselective approach to trisubstituted pyrazoles via palladium-catalyzed oxidative sonogashira-carbonylation of arylhydrazines. Org. Lett. 2017;19:3466–3469. doi: 10.1021/acs.orglett.7b01447. [DOI] [PubMed] [Google Scholar]
  10. (a) Wang C. Zhang Z. Tu Y. Li Y. Wu J. Zhao J. Palladium-catalyzed oxidative cross-coupling of arylhydrazines and arenethiols with molecular oxygen as the sole oxidant. J. Org. Chem. 2018;83:2389–2394. doi: 10.1021/acs.joc.7b02926. [DOI] [PubMed] [Google Scholar]; (b) Chang S. Dong L. Song H. Feng B. Denitrogenative palladium-catalyzed coupling of aryl halides with arylhydrazines under mild conditions. Org. Biomol. Chem. 2018;16:3282–3288. doi: 10.1039/C8OB00305J. [DOI] [PubMed] [Google Scholar]; (c) Taniguchi T. Naka T. Imoto M. Takeda M. Nakai T. Mihara M. Mizuno T. Nomoto A. Ogawa A. Transition-metal-free and oxidant-free cross-coupling of arylhydrazines with disulfides: base-promoted synthesis of unsymmetrical aryl sulphides. J. Org. Chem. 2017;82:6647–6655. doi: 10.1021/acs.joc.7b00767. [DOI] [PubMed] [Google Scholar]; (d) Zhao Y. Song Q. Palladium-catalyzed aerobic oxidative cross-coupling of arylhydrazines with terminal alkynes. Chem. Commun. 2015;51:13272–13274. doi: 10.1039/C5CC04111B. [DOI] [PubMed] [Google Scholar]; (e) Ravi M. Chauhan P. Kant R. Shukla S. K. Yadav P. P. Transition-metal-free C-3 arylation of quinoline-4-ones with arylhydrazines. J. Org. Chem. 2015;80:5369–5376. doi: 10.1021/acs.joc.5b00739. [DOI] [PubMed] [Google Scholar]; (f) Peng Z. Hu G. Qiao H. Xu P. Gao Y. Zhao Y. Palladium-catalyzed suzuki cross-coupling of arylhydrazines via C–N bond cleavage. J. Org. Chem. 2014;79(6):2733–2738. doi: 10.1021/jo500026g. [DOI] [PubMed] [Google Scholar]; (g) Hofmann J. Jasch H. Heinrich M. R. Oxidative radical arylation of anilines with arylhydrazines and dioxygen from air. J. Org. Chem. 2014;79:2314–2320. doi: 10.1021/jo500063r. [DOI] [PubMed] [Google Scholar]
  11. Ouyang K. Hao W. Zhang W. X. Xi Z. Transition-metal-catalyzed cleavage of C–N single bonds. Chem. Rev. 2015;115:12045–12090. doi: 10.1021/acs.chemrev.5b00386. [DOI] [PubMed] [Google Scholar]
  12. (a) Wang X. Huang Y. Xu Y. Tang X. Wu W. Jiang H. Palladium-catalyzed denitrogenative synthesis of aryl ketones from arylhydrazines and nitriles using O2 as sole oxidant. J. Org. Chem. 2017;82:2211–2218. doi: 10.1021/acs.joc.6b02697. [DOI] [PubMed] [Google Scholar]; (b) Cheng K. Wang G. Meng M. Qi C. Acid-promoted denitrogenative Pd-catalyzed addition of arylhydrazines with nitriles at room temperature. Org. Chem. Front. 2017;4:398–403. doi: 10.1039/C6QO00634E. [DOI] [Google Scholar]
  13. (a) Lee S. Y. Jeon J. Cheon C.-H. Synthesis of 2-substituted quinolines from 2-aminostyryl ketones using iodide as a catalyst. J. Org. Chem. 2018;83:5177–5186. doi: 10.1021/acs.joc.8b00552. [DOI] [PubMed] [Google Scholar]; (b) Lee S. Cheon C.-H. On-water synthesis of 2-substituted quinolines from 2-aminochalcones using benzylamine as the nucleophilic catalyst. J. Org. Chem. 2018;83:13036–13044. doi: 10.1021/acs.joc.8b01675. [DOI] [PubMed] [Google Scholar]
  14. Xu T. Shao Y. Dai L. Yu S. Cheng T. Chen J. Pd-catalyzed tandem reaction of 2-aminostyryl nitriles with arylboronic acids: synthesis of 2-arylquinolines. J. Org. Chem. 2019;84:13604–13614. doi: 10.1021/acs.joc.9b01875. [DOI] [PubMed] [Google Scholar]
  15. (a) Harrison J. G. Gutierrez O. Jana N. Driver T. G. Tantillo D. J. Mechanism of Rh2(ii)-catalyzed indole formation the catalyst does not control product selectivity. J. Am. Chem. Soc. 2016;138:487–490. doi: 10.1021/jacs.5b11427. [DOI] [PubMed] [Google Scholar]; (b) Garanti L. Zecchi G. Thermochemical behavior of o-azidocinnamonitriles. J. Org. Chem. 1980;45:4767–4769. doi: 10.1021/jo01311a044. [DOI] [Google Scholar]; (c) Baker J. R. Gilbert J. Paula S. Zhu X. Sakoff J. A. McCluskey A. Dichlorophenylacrylonitriles as AhR ligands that display selective breast cancer cytotoxicity in vitro. ChemMedChem. 2018;13:1447–1458. doi: 10.1002/cmdc.201800256. [DOI] [PubMed] [Google Scholar]
  16. Lee S. Y. Cheon C.-H. On-water synthesis of 2-substituted quinolines from 2-aminochalcones using benzylamine as the nucleophilic catalyst. J. Org. Chem. 2018;83:13036–13044. doi: 10.1021/acs.joc.8b01675. [DOI] [PubMed] [Google Scholar]
  17. Gabriele B. Mancuso R. Salerno G. Ruffolo G. Plastina P. Novel and convenient synthesis of substituted quinolines by copper- or palladium-catalyzed cyclodehydration of 1-(2-aminoaryl)-2-yn-1-ols. J. Org. Chem. 2007;72:6873–6877. doi: 10.1021/jo071094z. [DOI] [PubMed] [Google Scholar]
  18. Kumar P. Garg V. Kumara M. Verma A. , K. Rh(iii)-catalyzed alkynylation: synthesis of functionalized quinolines from aminohydrazones. Chem. Commun. 2019;55:12168–12171. doi: 10.1039/C9CC06205J. [DOI] [PubMed] [Google Scholar]
  19. Liu N. Wang Z. Kumada coupling of aryl, heteroaryl, and vinyl chlorides catalyzed by amido pincer nickel complexes. J. Org. Chem. 2011;76:10031–10038. doi: 10.1021/jo201821g. [DOI] [PubMed] [Google Scholar]
  20. Liu W. Yang X. Zhou Z. Li C. Simple and clean photo-induced methylation of heteroarenes with MeOH. Chem. 2017;2:688–702. [Google Scholar]
  21. Yuan J. Yang L. Mao P. Qu L. AgNO3-catalyzed direct C–H arylation of quinolines by oxidative decarboxylation of aromatic carboxylic acids. Org. Chem. Front. 2017;4:545–554. doi: 10.1039/C6QO00533K. [DOI] [Google Scholar]
  22. Palimkar S. S. Siddiqui S. A. Daniel T. Lahoti R. J. Srinivasan K. V. Ionic liquid-promoted regiospecific Friedlander annulation: novel synthesis of quinolines and fused polycyclic quinolones. J. Org. Chem. 2003;68:9371–9378. doi: 10.1021/jo035153u. [DOI] [PubMed] [Google Scholar]
  23. Hofmayer M. S. Lutter F. H. Grokenberger L. Hammann J. M. Knochel P. Practical Ni-catalyzed cross-coupling of unsaturated zinc pivalates with unsaturated nonaflates and triflates. Org. Lett. 2019;21:36–39. doi: 10.1021/acs.orglett.8b03417. [DOI] [PubMed] [Google Scholar]
  24. Chakraborty G. Sikari R. Das S. Mondal R. Sinha S. Banerjee S. Paul N. D. Dehydrogenative synthesis of quinolines, 2-aminoquinolines, and quinazolines using singlet diradical Ni(ii)-catalysts. J. Org. Chem. 2019;84:2626–2641. doi: 10.1021/acs.joc.8b03070. [DOI] [PubMed] [Google Scholar]
  25. Das S. Maiti D. Sarkar S. D. Synthesis of polysubstituted quinolines from α-2-aminoaryl alcohols via nickel-catalyzed dehydrogenative coupling. J. Org. Chem. 2018;83:2309–2316. doi: 10.1021/acs.joc.7b03198. [DOI] [PubMed] [Google Scholar]
  26. Hu W. Zhang Y. Zhu H. Ye D. Wang D. Unsymmetrical triazolyl-naphthyridinyl-pyridine bridged highly active copper complexes supported on reduced graphene oxide and their application in water. Green Chem. 2019;21:5345–5351. doi: 10.1039/C9GC02086A. [DOI] [Google Scholar]
  27. Maji M. Chakrabarti K. Panja D. Kundu S. Sustainable synthesis of N-heterocycles in water using alcohols following the double dehydrogenation strategy. J. Catal. 2019;373:93–102. doi: 10.1016/j.jcat.2019.03.028. [DOI] [Google Scholar]
  28. Das S. Sinha S. Samanta D. Mondal R. Chakraborty G. Brandaõ P. Paul N. D. Metal–ligand cooperative approach to achieve dehydrogenative functionalization of alcohols to quinolines and quinazolin-4(3H)-ones under mild aerobic conditions. J. Org. Chem. 2019;84:10160–10171. doi: 10.1021/acs.joc.9b01343. [DOI] [PubMed] [Google Scholar]
  29. Cho E. J. Senecal T. D. Kinzel T. Zhang Y. Watson D. A. Buchwald S. L. The palladium-catalyzed trifluoromethylation of aryl chlorides. Science. 2010;328:1679–1681. doi: 10.1126/science.1190524. [DOI] [PMC free article] [PubMed] [Google Scholar]
  30. Tobisu M. Hyodo I. Chatani N. Nickel-catalyzed reaction of arylzinc reagents with N-aromatic heterocycles: a straightforward approach to C–H bond arylation of electron-deficient heteroaromatic compounds. J. Am. Chem. Soc. 2009;131:12070–12071. doi: 10.1021/ja9053509. [DOI] [PubMed] [Google Scholar]
  31. Yan H. Hou Z. Xu H. Photoelectrochemical C–H alkylation of heteroarenes with organotrifluoroborates. Angew. Chem., Int. Ed. 2019;58:4592–4595. doi: 10.1002/anie.201814488. [DOI] [PubMed] [Google Scholar]
  32. Horn J. Marsden S. P. Nelson A. House D. Weingarten G. G. Convergent, regiospecific synthesis of quinolines from o-aminophenylboronates. Org. Lett. 2008;10:4117–4120. doi: 10.1021/ol8016726. [DOI] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

RA-010-D0RA01043J-s001
RA-010-D0RA01043J-s001.pdf (2.9MB, pdf)

Articles from RSC Advances are provided here courtesy of Royal Society of Chemistry

RESOURCES