Access to 1-amino-3,4-dihydroisoquinolines via palladium-catalyzed C–H bond aminoimidoylation reaction from functionalized isocyanides

Abstract

Efficient access to 1-amino-3,4-dihydroisoquinolines, through palladium-catalyzed intramolecular C–H bond aminoimidoylation of α-benzyl-α-isocyanoacetates, has been developed. Consecutive isocyanide insertion and C–H bond activation were realized with C–N and C–C bonds formation in one step under redox neutral conditions, employing O-benzoyl hydroxylamines as electrophilic amino sources.

Efficient and practice access to 1-amino-3,4-dihydroisoquinolines, through palladium-catalyzed intramolecular C–H bond aminoimidoylation of α-benzyl-α-isocyanoacetates, has been developed.

As a class of cyclic amidine compounds, 1-amino-3,4-dihydroisoquinolines are essential six-membered heterocycles which can be found in numerous natural products, functional chemicals and pharmaceutical agents (Scheme 1).¹ For example, piperazine tethered dihydroisoquinoline and benzocyclic amide I was found to be an efficient cardiovascular agent.^1a Phenylalanine-derived and arylamine or cyclic aliphatic-amine-containing 1-amino-3,4-dihydroisoquinolines (II–V) show outstanding BACE-1 inhibition, kinase VEGFR-2 inhibition, phosphodiesterase IV inhibition and hydrogen ion-sodium exchanger NHE-3 inhibition activities, respectively.^1b–e Traditional preparation of such 1-amino-3,4-dihydroisoquinoline scaffolds is mainly based on nucleophilic substitution of readily prepared 3,4-dihydroisoquinolines² and Bischler-Napieralski reaction starting from urea.³ Most of these methods suffer from multiple-step synthesis, harsh conditions or the use of toxic reagents. Thus, developing an efficient and practical method for the construction of 1-amino-3,4-dihydroisoquinoline derivatives remain an attractive synthetic task.

Scheme 1. (a) Representative bioactive molecules containing the 1-amino-3,4-dihydroisoquinoline moiety. (b) Traditional synthetic methods.

In recent decades, isocyanides have been extensively studied in multicomponent reactions,⁴ imidoyl radical-involved transformations⁵ and transition-metal-catalyzed insertion reactions⁶ due to their diverse and unique reactivities. A variety of acyclic imine derivatives were synthesized via palladium-catalyzed imidoylation reactions.⁷ For the construction of biorelevant nitrogen-containing heterocycles via Pd-catalyzed non-functionalized isocyanide insertion reactions, a nucleophilic group is usually preinstalled to the substrates containing C–X (C–H) bonds, followed by Pd-catalyzed oxidative addition (C–H bond activation)/isocyanide insertion/ligand substitution/reductive elimination sequence.⁸ For example, Maes and coworkers developed an efficient palladium-catalyzed synthesis of 4-aminoquinazolines from N-(2-bromoaryl)amidines using amidine as an internal nucleophile.^8a Access to the same scaffold through palladium-catalyzed amidine-directed C–H bond imidoylation/cyclization reaction was reported by Zhu group.^8c Isocyanide acted as a C1 synthon in these cyclization reactions, with the terminal carbon of isocyanide being used in the ring formation.⁹ Considering the diversity of R group on the nitrogen atom of isocyanide, the so-called functionalized isocyanide strategy was widely developed as well, with various N-heterocycles such as oxazoles,¹⁰ indoles,¹¹ phenanthridines,¹² 9H-pyrido[3,4-b]indoles¹³ and nonaromatic azepines¹⁴ being synthesized efficiently. Zhu and coworkers developed the first asymmetric C–H bond imidoylation reaction from easily accessible α,α-dibenzyl-α-isocyanoacetates with chiral quaternary-carbon-containing 3,4-dihydroisoquinolines being generated (Scheme 2a).¹⁵ Recently, a catalytic system controlled regioselective C–H bond imidoylation was realized for the selective synthesis of 5 or 6-membered cyclic imines (Scheme 2b).¹⁶ Aryl halides were mostly used in these transformations while N–O compounds were rarely reported as electrophiles in Pd-catalyzed isocyanide insertion reactions.¹⁷ Zhu group reported the synthesis of phenanthridin-6-amine derivatives from O-benzoyl hydroxylamines and commonly used biaryl isocyanides.^17c However, a methyl or methoxyl carbonyl group was needed at the ortho position of isocyano group, which critically limited the application of the reaction. Herein, we developed an efficient and practical synthesis of 1-amino-3,4-dihydroisoquinolines, through palladium-catalyzed intramolecular C–H bond aminoimidoylation reaction of α-benzyl-α-isocyanoacetates. Consecutive isocyanide insertion and C–H bond activation were realized with C–N and C–C bonds being constructed in one step, employing O-benzoyl hydroxylamines as electrophilic amino sources.

Scheme 2. Palladium-catalyzed imidoylative cyclization of α-benzyl-ethylacetates.

The reaction conditions were optimized with ethyl 2-benzyl-2-isocyano-3-phenylpropanoate (1a) and morpholino benzoate (2a) as model substrates, and ethyl 3-benzyl-1-morpholino-3,4-dihydroisoquinoline-3-carboxylate (3a) was obtained in 34% yield in the presence of Pd(OAc)₂ (1.5 equiv.), PPh₃ (20 mol%), Cs₂CO₃ (1.0 equiv.) and PivOH (0.6 equiv.) in toluene at 80 °C (entry 1, Table 1). Dioxane was proven to be the best choice after screening of solvents and the product was generated in 76% yield (entries 2–6). The reaction was totally suppressed in high polar solvents such as MeCN and DMSO (entries 5–6). The yield decreased sharply when the catalyst was changed to Pd(OPiv)₂, Pd(TFA)₂, PdCl₂(MeCN)₂ or Pd(PPh₃)₄ (entries 7–10). And no better results were detected by using other phosphine ligands (entries 12–17). Fortunately, the yield of 3a was increased to 84% at 110 °C (entry 18). Control experiments revealed that palladium catalyst and additives (Cs₂CO₃/PivOH) were essential and the reaction was much less efficient when using other bases such as CsOPiv, K₂CO₃, and Na₂CO₃ (entries 19–24). The yield decreased sharply to 61% when the catalyst loading was reduced to 5 mol% (entry 25).

Optimization of the reaction conditions^a.

Entry	Catalyst	Ligand	Solvent	Yieldb
1	Pd(OAc)2	PPh3	Toluene	34
2	Pd(OAc)2	PPh3	THF	Trace
3	Pd(OAc)2	PPh3	DCE	29
4	Pd(OAc)2	PPh3	Dioxane	76
5	Pd(OAc)2	PPh3	MeCN	Trace
6	Pd(OAc)2	PPh3	DMSO	Trace
7	Pd(OPiv)2	PPh3	Dioxane	31
8	Pd(TFA)2	PPh3	Dioxane	26
9	PdCl2(MeCN)2	PPh3	Dioxane	38
11	Pd(PPh3)4		Dioxane	56
12	Pd(OAc)2	BINAP	Dioxane	30
13	Pd(OAc)2	dppb	Dioxane	26
14	Pd(OAc)2	dppp	Dioxane	28
15	Pd(OAc)2	XantPhos	Dioxane	42
16	Pd(OAc)2	SPhos	Dioxane	34
17	Pd(OAc)2	XPhos	Dioxane	24
18c	Pd(OAc)2	PPh3	Dioxane	84 (80)d
19c	None	PPh3	Dioxane	0
20c	Pd(OAc)2	None	Dioxane	56
21c,e	Pd(OAc)2	PPh3	Dioxane	0
22c,f	Pd(OAc)2	PPh3	Dioxane	41
23c,g	Pd(OAc)2	PPh3	Dioxane	24
24c,h	Pd(OAc)2	PPh3	Dioxane	31
25c,i	Pd(OAc)2	PPh3	Dioxane	61

^aReaction conditions: 1a (0.1 mmol), 2a (0.15 mmol), Pd-catalyst (0.01 mmol, 10 mol%), ligand (0.02 mmol, 20 mol%), Cs₂CO₃ (0.1 mmol, 1.0 equiv.), PivOH (0.06 mmol, 0.6 equiv.), 80 °C, Ar. A solution of 1a was added via a syringe pump within 1 h.

^bNMR yield with 1-iodo-4-methoxybenzene as an internal standard.

^c T = 110 °C.

^dIsolated yield.

^eWithout Cs₂CO₃ and PivOH.

^fCsOPiv was used as the base.

^gK₂CO₃ was used as the base.

^hNa₂CO₃ was used as the base.

ⁱ5 mol% of catalyst was used.

With the optimized conditions in hand, the scope of functionalized isocyanide was investigated first, using morpholino benzoate 2a as the coupling partner (Scheme 3). Both electron rich and withdrawing substituents such as Me, t-Bu, F, Cl, CF₃, CO₂Me and NO₂ at the para position of aromatic ring can tolerate the reaction conditions, and generate the corresponding products in good to excellent yields (3a–3h). Isocyanides bearing ortho substituents on the phenyl ring underwent the reaction smoothly, generating the products 3i and 3j in 58% and 82% yields respectively. Even substrates bearing two substituents were well suited to the reaction conditions, affording the aminoimidoylation products without loss of efficiency (3k–3l). Compound 3m was delivered with excellent regioselectivity in 63% yield when m-Cl substituted starting material was employed in the reaction, which indicated the hindrance sensitivity of this reaction. Modifying the ester moiety in 1 to a methyl ester or an amide did not impede the reaction, giving 3n and 3o with excellent yields. Changing one of the benzyl groups to alkyl substituents didn't decrease the reaction efficiency, generating products 3p and 3q in moderate yields.

Scheme 3. Scope of isocyanides. Reaction conditions: 1 (0.1 mmol), 2a (0.15 mmol), Pd(OAc)₂ (0.01 mmol, 10 mol%), PPh₃ (0.02 mmol, 20 mol%), Cs₂CO₃ (0.1 mmol, 1.0 equiv.), PivOH (0.06 mmol, 0.6 equiv.), 110 °C, Ar. A solution of 1 was added via a syringe pump within 1 h. Isolated yields.

Then we moved our attention to the investigation of substrate scope of aminating partners (Scheme 4). It was found that various O-benzoyl hydroxylamines derived from piperidines could be smoothly employed in the reaction (4a–4e). Substituents such as Me, CO₂Et, OMe and ketal group on the piperidines were well tolerated (4b–4e). Aminating reagent derived from Boc-protected piperazine was also compatible with this reaction, generating the product 4f in 99% yield. Fortunately, acyclic aminated product 4g was obtained as well in moderate yield.

Scheme 4. Substrate scope of aminating agents. Reaction conditions: 1a (0.1 mmol), 2 (0.15 mmol), Pd(OAc)₂ (0.01 mmol, 10 mol%), PPh₃ (0.02 mmol, 20 mol%), Cs₂CO₃ (0.1 mmol, 1.0 equiv.), PivOH (0.06 mmol, 0.6 equiv.), 110 °C, Ar. A solution of 1a was added via a syringe pump within 1 h. Isolated yields.

When ethyl 2-isocyano-2,3-diphenylpropanoate was conducted in the reaction with 2a, the 3,4-dihydroisoquinoline product 6 was generated exclusively, albeit in only 37% yield (Scheme 5a). To examine if isoindoline could be afforded by this aminoimidoylation reaction, ethyl 2-isocyano-4-methyl-2-phenylpentanoate (7) was selected as the substrate with 2a (Scheme 5b). However, no desired product was generated under the standard conditions, showing different site-selectivity with the previous imidoylation reaction developed by Zhu and coworkers.¹⁶

Scheme 5. Reaction conditions: 5(7) (0.1 mmol), 2a (0.15 mmol), Pd(OAc)₂ (0.01 mmol, 10 mol%), PPh₃ (0.02 mmol, 20 mol%), Cs₂CO₃ (0.1 mmol, 1.0 equiv.), PivOH (0.06 mmol, 0.6 equiv.), 110 °C, Ar. A solution of 5(7) was added via a syringe pump within 1 h. Isolated yields.

Gram-scale preparation of 3a was carried out smoothly under standard conditions (Scheme 6a). The reduction reaction of 3a was carried out using LiAlH₄ and the corresponding product 8 was generated in 70% yield (Scheme 6b). The ester group was successfully transformed to tertiary alcohol (9) in moderate yield with Grignard reagent.

Scheme 6. Gram-scale preparation and diversifications of 3a.

In order to get further insight into the reaction mechanism, a radical trapping reaction with 0.1 equivalents of TEMPO was carried out (Scheme 7a). The product 3a was generated without loss of efficiency, which indicated that the radical-involved pathway could be ruled out. A plausible mechanism was then proposed in Scheme 7b. The reaction was initiated with oxidative addition of O-benzoyl hydroxylamine 2a to the in situ generated Pd(0) species. Migratory isocyanide insertion to intermediate B afforded aminoimidoyl Pd(ii) intermediate C. The following intramolecular C–H bond activation and reductive elimination viaE yielded the final product 3a and regenerated Pd(0) to complete the catalytic cycle.

Scheme 7. Proposed mechanism.

In conclusion, we have developed an efficient and practical method to prepare 1-amino-3,4-dihydroisoquinolines via palladium-catalyzed intramolecular C–H bond aminoimidoylation of α-benzyl-α-isocyanoacetates under redox-neutral conditions. Consecutive isocyanide insertion and C–H bond activation were realized with C–N and C–C bonds formation in one step, employing O-benzoyl hydroxylamines as electrophilic amino sources. A broad range of substrates were applicable to the reaction in good to excellent yields.

Conflicts of interest

There are no conflicts to declare.