Identification of Human Alanine–Glyoxylate Aminotransferase Ligands as Pharmacological Chaperones for Variants Associated with Primary Hyperoxaluria Type 1

Abstract

Primary hyperoxaluria type I (PH1) is a rare kidney disease due to the deficit of alanine:glyoxylate aminotransferase (AGT), a pyridoxal-5′-phosphate-dependent enzyme responsible for liver glyoxylate detoxification, which in turn prevents oxalate formation and precipitation as kidney stones. Many PH1-associated missense mutations cause AGT misfolding. Therefore, the use of pharmacological chaperones (PCs), small molecules that promote correct folding, represents a useful therapeutic option. To identify ligands acting as PCs for AGT, we first performed a small screening of commercially available compounds. We tested each molecule by a dual approach aimed at defining the inhibition potency on purified proteins and the chaperone activity in cells expressing a misfolded variant associated with PH1. We then performed a chemical optimization campaign and tested the resulting synthetic molecules using the same approach. Overall, the results allowed us to identify a promising hit compound for AGT and draw conclusions about the requirements for optimal PC activity.

Introduction

Liver peroxisomal alanine:glyoxylate aminotransferase (AGT) is a homodimeric protein belonging to the fold type I class of pyridoxal 5′-phosphate (PLP)-enzymes.¹ Each subunit contains one PLP molecule bound to the apoprotein via a Schiff base linkage with Lys209 and stabilized by weak interactions at the active site including salt bridges, base stacking, and hydrogen bonds.^1,2 AGT catalyzes the transamination of l-alanine and glyoxylate to pyruvate and glycine, respectively. Although the catalytic pathway is that typical of PLP-dependent transaminases, the reaction catalyzed by AGT is irreversible under physiological conditions, in agreement with the role of the enzyme in glyoxylate detoxification.³ Two polymorphic forms of the AGXT gene encoding AGT exist in humans: the major allele (encoding AGT-Ma) and the minor allele (encoding AGT-Mi). The latter is characterized by a 74-bp duplication in intron 1 and two point mutations causing the P11L and I340M amino acid substitutions.⁴ AGT-Mi exhibits a 30% reduction of transaminase specific activity with respect to AGT-Ma, as well as decreased thermodynamic and kinetic stability.⁵⁻⁷ Inherited mutations leading to the loss of AGT functionality determine a rare metabolic recessive disorder known as primary hyperoxaluria type I (PH1, OMIM 259900).⁸ The main hallmark of PH1 is the formation and progressive deposition of calcium oxalate stones in the kidneys, often leading to renal failure and, in the most severe cases, to systemic oxalosis. The clinical aspects of this pathology have been extensively reviewed.⁹⁻¹¹ PH1 is currently treated by combined or sequential liver–kidney transplantation.⁹ In addition, a substrate-reduction approach based on the silencing of the gene encoding glycolate oxidase has been recently approved in the USA and Europe.¹² Both transplantation and siRNA therapies are characterized by high costs for the healthcare systems. The administration of pyridoxine (PN), a metabolic precursor of PLP, reduces urinary oxalate excretion by approximately 30% in responsive patients, but they remain susceptible to stone formation.^13,14 No pharmacological treatments are available for patients unresponsive to PN. Therefore, the need arises to develop cheap and less invasive treatments. Up to now, more than 200 disease-associated mutations of the human AGXT gene have been identified. Biochemical and cell biology studies performed in the past few years have highlighted that many mutations cause folding defects in AGT that in turn can determine (i) increased aggregation tendency, either in the cytoplasm or inside peroxisomes; (ii) reduced stability of the dimeric structure of the protein, typically in the apo-form; (iii) enhanced susceptibility to proteolytic degradation; and (iv) mistargeting of the protein to mitochondria.¹⁵⁻¹⁷ Among the approaches under investigation to treat protein misfolding diseases, one of the most promising involves the use of pharmacological chaperones (PCs). PCs are drug-like molecules able to specifically bind a misfolded protein and improve its folding efficiency, thus recovering the intracellular yield of variants affected by conformational defects.^18,19 PCs used to treat diseases due to enzymatic deficits are either vitamin derivatives functioning as coenzymes or competitive inhibitors of the disease-causing enzyme.²⁰⁻²² These molecules are usually characterized by a high binding affinity and specificity, two features that allow them to be effective at a very low concentration. In a proof-of-concept study, we showed that an AGT inhibitor acting as PC is aminooxyacetic acid (AOA).²³ We observed in cellular models that the presence of AOA increases the amount of functional AGT even in cells expressing conformational variants.²³ In particular, it improves the folding of G41R-Ma, a variant mainly characterized by an increased susceptibility to aggregation and proteolytic degradation, and promotes the peroxisomal localization of G170R-Mi and I244T-Mi, two variants aberrantly targeted to mitochondria.¹⁵ Since AOA lacks of specificity because it interacts with many PLP-enzymes and with free PLP,²⁴ we performed a small-scale screening campaign and identified AOA analogues acting as AGT inhibitors and possibly displaying chaperone activity. Continuing on this path, here we decided to focus our attention on compound 1, due to its promising preliminary in vitro activity, as a feasible starting point for a medicinal chemistry campaign aimed at identifying AGT ligands with improved affinity and chaperone activity. We started from in silico screening of commercially available compounds structurally related to compound 1. Based on the obtained results, we set up a fast and practical synthetic protocol that allowed us to obtain in a few steps 21 derivatives with the desired substituents. We first screened each compound on AGT-Ma and on the G41R-Ma variant, the latter as a prototype of a folding-defective variant, using a twofold strategy: (i) test of binding and inhibition potency on purified proteins and (ii) test of the chaperone activity in a cellular model either in the absence or in the presence of PN. Our results led to the identification of a hit compound showing high affinity for AGT and behaving as PC for folding-defective variants associated with PH1.

Results and Discussion

Selection of Commercially Available AGT Ligands

In the search for a specific AGT ligand effective as PC, we started from a known hit compound (compound 1, Figure 1).²³ The scaffold of compound 1 was used to launch a small-size screening campaign of commercially available molecules that were tested in silico for their putative ability to bind at the AGT active site. Based on their predicted binding affinity for the AGT active site, we selected four analogues of compound 1 (compounds 2, 3, 4, and 5) (Figure 1).

Figure 1.

Chemical structures of the selected commercially available analogues of compound 1.

Test of Commercially Available Compounds on Wild-Type and Mutant AGT: Binding and Inhibition Potency

We evaluated the interaction of compounds 1, 2, 3, 4, and 5 with AGTwt and the folding-defective G41R variant²⁵ by absorbance spectroscopy. As already observed for AOA,²³ the interaction with each ligand caused the disappearance of the bands at 423 and 340 nm, attributed to the ketoenamine and enolimine tautomers of the internal aldimine, respectively,³ and the concomitant appearance of a peak at 374 nm (Figure S1A). Upon excitation of the enzyme–inhibitor complexes at 374 nm, a fluorescence emission spectrum with maximum at ∼450 nm was observed (Figure S1C). Similar spectral changes occurred for the G41R variant, although in the latter case two absorbance bands centered at 370 and at 334 nm were observed in the presence of each ligand (Figure S1B,D) due to subtle active site differences caused by the mutation of Gly41 that affect the tautomeric equilibrium.²⁵ Overall, these results indicate that all compounds are able to bind the AGT active site through the formation of an oxime between the carbonyl group of PLP and the amino group of the ligand. We used molecular docking to predict the main interactions driving the formation of a complex between AGT and the compounds under study. The predicted pose of compound 1 is shown in Figure 2, but the results obtained are identical for all tested molecules. First, we found that the aminooxy group is placed in a position comparable to that of AOA,¹ suitable to interact with PLP generating an external aldimine. The hypothesis that the amino group of compound 1 forms a Schiff base with the carbonyl group of PLP is supported by the following considerations: (i) since peroxisomal matrix proteins like AGT fold in the cell cytosol and are then imported in the fully folded state, they interact with molecules acting as PCs at a pH of approximately 7.2; (ii) considering that the amino group of compound 10b has a pK_a of 4.17 ± 0.06 in water, as experimentally measured, it should be in its neutral form at cytosolic pH. In silico analyses also revealed that the benzene ring of compound 1 is involved in a cation−π interaction with Arg360, an active site residue that usually forms a salt bridge with the carboxylate group of the substrate.¹ The latter interaction could strongly influence the binding to the AGT active site and possibly affect the potency of the compounds.

Figure 2.

Binding mode of compound 1 into the AGT active site obtained by molecular docking. (A) Two-dimensional (2D) representation showing the interactions of active site residues (upper panel) and PLP (lower panel) with compound 1. (B) Three-dimensional (3D) representation of the interactions between compound 1 and residues located at the AGT active site. PLP and compound 1 are shown as yellow and green sticks, respectively. Residues belonging to the same subunit of PLP are colored grey, while those belonging to the neighboring subunit are colored orange. The figure was rendered using MOE 2018.0101 (CCG, Montreal, Quebec, Canada) from the crystal structure of the AGT-AOA complex (PDB ID:1H0C).

We thus tested the inhibitory activity of each molecule and determined the IC₅₀ values, as reported in Table 1. It can be observed that the IC₅₀ values for the G41R variant are higher than those for the wild type, in particular in the case of compound 5. Since the crystal structure of the G41R variant is not available, it is difficult to rationalize these data. Nevertheless, previous analyses have suggested that the mutation of Gly41 could give rise to subtle active site changes through the loop 24-32 connecting the N-terminus to the PLP binding pocket.²⁵ More recently, molecular dynamics simulations have shown that helix 48-64 samples alternative conformations inducing a fluctuation that propagates to the active site.²⁶ It can be hypothesized that the mutation of Gly41 could affect the conformation of both the loop 24-32 and the helix 48-64, thus accounting for the active site variations. We also observed that the IC₅₀ values of the analogues were lower than that of compound 1, with the only exception being compound 4 on the G41R variant. This suggests that the AGT active site is able to tolerate the presence of substituents of a different nature at the phenyl ring side chain and that they may play a role in improving binding potency.

Table 1. IC₅₀ Values of Compound 1 and Commercially Available Analogues for AGTwt and the G41R Variant.

	wild-type AGT	G41R variant
compound	IC50 (μM)	IC50 (μM)
1	5.6 ± 0.1	12 ± 1
2	2.4 ± 0.4	7.5 ± 0.8
3	0.7 ± 0.1	2.5 ± 1.8
4	1.4 ± 0.2	12 ± 2
5	0.16 ± 0.03	5.2 ± 0.3

Test of Commercially Available Compounds on Wild-Type and Mutant AGT: Inhibition Mechanism

AOA behaves as a slow, tight-binding competitive inhibitor for AGT, i.e., the equilibrium E + I ↔ EI is so shifted toward the EI complex formation that it significantly reduces the population of free inhibitor molecules, and the inhibitor dissociates from the target only upon incubation with the saturating substrate.^23,27,28 We confirmed that compound 1 and analogues also behave as slow, tight-binding inhibitors, as indicated by the time-dependent recovery of transaminase activity of each AGT-inhibitor complex upon incubation with 200 μM PLP and/or 0.5 M l-alanine at 25 °C.

Therefore, we used the progression-curves method²⁹ to determine the kinetic parameters of the inhibition. As shown in the example of compound 3 with AGTwt reported in Figure 3, activity decreased with time upon addition of the enzyme to an assay mixture containing the substrate and the inhibitor. While the initial velocity (v₀) was independent of inhibitor concentration, the reaction rate gradually decreased with time, reaching a steady-state value (v_s) inversely proportional to the inhibitor concentration. From the linear fitting of the k_obs values versus inhibitor concentration, we calculated the association (k₁) and dissociation (k_–1) kinetic rate constants and the inhibition constant (K_I) (Table 2). It can be observed that a remarkable reduction of the K_I value with respect to compound 1 is only observed when a methoxy substituent is added to the phenylic ring at the meta- or para-position. The increased affinity of the methoxy-substituted compounds is mainly driven by the increase in k₁ for AGTwt and by a decrease in k_–1 for the G41R variant. By analyzing the binding pose of the compounds obtained by molecular docking (Figure 2), we can argue that the effects observed for the derivatives bearing substituents at positions 3 and 4 are mainly linked to their ability to strengthen the cation−π interaction with Arg360 by inductive and resonance effects. Indeed, at position 3, the halogen substituents have an inductive electron-withdrawing effect, thus explaining the reduction of potency (2 and 3vs1). On the contrary, the shift of the electron-donating methoxy group from position 3 (4), where it behaves as an electron-withdrawing group, to position 4 (5), where it behaves as an electron-donating group, has the greatest effects on binding potency (5vs1, 2, 3, 4).^30,31 It must be mentioned that the docking scores of compounds 1–5 did not show significant differences, as usually observed when considering interactions involving electronic effects, thus preventing the rationalization of the different potency based on in silico analyses.

Figure 3.

Kinetic characterization of the slow, tight-binding inhibition of AGTwt by compound 3. (A) Progression curves of pyruvate production during the reaction of AGTwt (0.05 μM) in the presence of l-alanine 250 mM, glyoxylate 10 mM, and compound 3 at the indicated concentrations in KP 0.1 M pH 7.4 at 25 °C for 50 min. Inset: plot of the k_obs values obtained using eq 1 as a function of inhibitor concentration.

Table 2. Inhibition Constant (K_I) and Association (k₁) and Dissociation (k_–1) Kinetic Rate Constants of Compound 1 and Commercially Available Analogues.

	wild-type AGT			G41R variant
compound	KI (μM)	k1 (μM–1 min–1) × 10–2	k–1 (min–1) × 10–2	KI (μM)	k1 (μM–1 min–1) × 10–2	k–1 (min–1) × 10–2
1	0.6 ± 0.3	27 ± 3	17 ± 7	3 ± 1	6 ± 1	19 ± 10
2	3.4 ± 1.5	1.8 ± 0.3	6 ± 2	8 ± 2	2.5 ± 0.7	21.0 ± 0.5
3	3.8 ± 0.8	0.5 ± 0.2	15 ± 3	2.0 ± 0.4	9 ± 1	21 ± 2
4	0.04 ± 0.01	450 ± 4	19 ± 7	0.36 ± 0.08	1.7 ± 0.2	0.6 ± 0.1
5	0.08 ± 0.01	120 ± 58	10 ± 3	0.16 ± 0.03	6.0 ± 0.1	0.9 ± 0.2

Test of Compound 1 and Analogues on Wild-Type and Mutant AGT Expressed in Mammalian Cells

The chaperone activity of compound 1 and analogues was studied using a well-known and previously used cellular model of PH1 based on CHO cells stably expressing glycolate oxidase (GO)^32,33 and wild-type AGT (CHO-GO-AGTwt) or the G41R variant (CHO-GO-G41R). Cells were cultured for 1 week, a time sufficient to allow the majority of AGT to be synthesized in the presence of each putative PC,³⁴ in the presence of 50 μM inhibitor, a concentration higher than the K_I of the analyzed species chosen to take into account any possible effect due to intracellular import. Moreover, we performed the treatment either in a low-B6 medium mimicking a nearly physiological plasmatic vitamin B6 concentration or in the presence of 10 μM PN, mimicking the treatment with vitamin B6. We measured the transaminase specific activity and protein levels in the soluble fraction of the lysate of each sample. We found that neither compound 1 nor its derivatives alter the transaminase specific activity and the protein levels of CHO-GO-AGTwt cells (Figure 4A,B). In agreement with the G41R being a mutation that compromises AGT folding,²⁵ the specific activity and expression level of the variant were equal to 10 and 8%, respectively, as compared with AGTwt. Analogs of compound 1 partially rescued the G41R mutation (Figure 4A,B), causing a statistically significant increase in specific activity, along with (for compounds 2 and 3) an increase in the amount of total protein. This suggests that they could promote the acquisition of the correct three-dimensional structure by misfolded intermediates, thus acting as PCs. However, it must be pointed out that the levels of active protein reached by treated CHO-GO-G41R cells are approximately 4% as compared with those of CHO-GO-AGTwt cells, thus suggesting that only a small rescue of the effects of the mutation occurs in the presence of the compounds.

Figure 4.

Effect of compound 1 and analogues on AGTwt and the G41R variant expressed in mammalian cells. CHO-GO-AGTwt and CHO-GO-AGT-G41R cells were grown for 7 days in the presence of 50 μM of compound 1 or its analogues. At the end of treatment, cells were detached and lysed, and soluble fraction of each sample was used for (A) transaminase activity determination. The values in CHO-GO-AGTwt control cells (191 ± 10 nmol of pyruvate/min/mg protein) and in CHO-GO-AGT-G41R control cells (6.8 ± 0.7 nmol of pyruvate/min/mg protein) were assumed to be 1 to facilitate the assessment of the changes. Data represent mean ± SEM (n = 3). *p < 0.05 vs control cells. (B) AGT protein level quantification by western blot. AGT levels in CHO-GO-AGTwt and CHO-GO-AGT-G41R control cells were assumed to be 1 to facilitate the assessment of the changes. GAPDH was used as loading control. The images are representative of one out of three separate experiments. Data represent mean ± SEM (n = 3). *p < 0.05 vs control cells.

It has been demonstrated that B6 administration increases the intracellular concentration of PLP, which not only plays a prosthetic role for AGT but also acts as PC by rescuing the effect of conformational mutations that only or mainly affect the folding of the apo-form of the enzyme.³⁵ Since PLP acts on apoAGT while the substrate analogues act on the holo-form, we decided to test a combined approach by treating cells with compound 1 and its analogues in the presence of PN. As expected, PN treatment caused a 50% decrease in specific activity of AGTwt due to the inhibition by accumulating intracellular pyridoxine 5′-phosphate (PNP), as previously reported.¹⁵ On the other hand, it caused a more than 10-fold increase in G41R-Ma specific activity (from 6.8 ± 0.7 to 114 ± 19 nmol of pyruvate/min/mg protein) and 1.5-fold increase in protein levels. These data strongly support the idea that the G41R mutation is responsive to vitamin B6, in line with published data on a patient expressing the variant.³⁶ Upon combined treatment with PN and each compound under study, we did not observe changes in either the protein level or specific activity of AGTwt. In the presence of PN, none of the ligands modified the specific activity of G41R, although protein levels were increased and reached statistical significance in the presence of PN and compound 3 (Figure S2A,B). Although it is not easy to interpret these data, it can be speculated that any possible additive or synergic effect of the combined treatment is masked by the known inhibition of activity by PNP.¹⁵ Nonetheless, the data confirm the effectiveness of compound 3 as PC.

Altogether, the paired analysis of the data at the protein and cellular level highlights that compounds showing the highest affinity for AGT do not display the best chaperone activity in a cellular system. Although we cannot exclude that the different behavior can depend on a different ability to cross the plasma membrane, it should be also considered that the kinetics of binding and dissociation from the target could be very important in determining the ability of a molecule as PC. The observation that compounds 2 and 3 show the lowest differences between association and dissociation rates allows us to speculate that the ability to rapidly establish an equilibrium during interaction with the target could be an important parameter governing chaperone activity.

Chemistry

We started a medicinal chemistry campaign to improve the chaperone activity of AGT ligands. Starting from compound 1 as the scaffold, we synthesized 21 compounds (Figure 5) taking advantage of the results obtained by the initial docking studies and by in vitro and in-cell analyses. The selection of compounds to be synthesized was based on the following key aspects: (i) definition of the ability of the enzyme active site to host substituents of different sizes and natures; (ii) introduction of heteroaromatic and heteroaliphatic substituents to change the electron density charge of the aromatic ring interacting with Arg360; (iii) chemical feasibility; and (iv) selection of the most promising compounds able to preserve the nature of the interaction observed by means of docking studies.

Figure 5.

Chemical structures of synthesized AGT ligands.

The synthesis of final compounds 10a–g started from the benzyl bromide 6a–g properly substituted that reacted with N-hydroxyphtalimide (7) in the presence of K₂CO₃ in DMSO to give the intermediates 8a–g³⁷ (Scheme 1). The deprotection of the amino group was performed with hydrazine, and finally, the salification of the amino group was done with HCl.

Scheme 1. Synthesis of Compounds 10a–g.

Reagents and conditions: (a) K₂CO₃, DMSO, r.t., 18 h, 94–96%; (b) hydrazine, DCM, r.t., 2 h, 92–97%; (c) HCl 4 N in dioxane, Et₂O (2:1) 92–98%.

For the synthesis of the final compounds 13h–l, where the methylene chain was lengthened and changed with an ethylene chain, a protocol similar to that reported above was followed, which allowed us to obtain the desired compounds in a few steps and good yields (Scheme 2).

Scheme 2. Synthesis of Compounds 13h–i.

Reagents and conditions: (a) K₂CO₃, DMSO, r.t., 18 h, 82–91%; (b) hydrazine, DCM, r.t., 2 h, 83–87%.

The synthesis of the final compounds 20j–l started with the protection of the aldehyde group of compound 14 with 1,3-propanediol in the presence of para-toluene sulfonic acid in toluene at 110 °C for 18 h. Then a Pd catalyzed Buckwald–Hartwig amination with the properly substituted amine 16j–l(38) and the consequent deprotection of the aldehyde group in acidic conditions led to compounds 17j–l. Afterward, a reduction was performed to convert the aldehyde in primary alcohol. The intermediates 18j–l reacted with N-hydroxyphthalimide to obtain intermediates 19j–l through a Mitsunobu reaction.³⁹ Finally, the amino group was deprotected with hydrazine, and the final compounds 20j–l were obtained (Scheme 3).

Scheme 3. Synthesis of Compounds 20j-l.

Reagents and conditions: (d) propane 1,3-diol, p-TsOH, toluene dry, 110 °C, 18 h, 92%; (e) Pd₂(dba)₃, BINAP, NaOtBu, toluene dry, 110 °C, 18 h, 56–68%; (f) HCl 1 N, 0 °C, 2 h, 73–84%; (g) LiAlH₄, THF dry, 0 °C, 30 min, 43–78%; (h) PPh₃, DEAD, THF dry, r.t., 18 h, 67–85%; (b) hydrazine, DCM, r.t., 2 h, 85–92%.

The synthesis of compounds 25m-p started from compound 14, and an already optimized protocol was followed, according to which 14 reacted with the appropriate boronic acid 21m-p and, through a Suzuki–Miyaura reaction, the aldehydes 22m–p properly substituted in meta position were obtained.⁴⁰ In the following step, the aldehyde group was reduced to a primary alcohol with LiAlH₄, and the product of this reaction was allowed to react with N-hydroxyphthalimide through a Mitsunobu reaction to obtain the intermediates 24m–p. Finally, the amino group was deprotected in the presence of hydrazine, and the desired final compounds (25m–p) were obtained (Scheme 4).

Scheme 4. Synthesis of Compounds 25m–p.

Reagents and conditions. (i) Pd(PPh₃)₄, Cs₂CO₃, DME/H₂O (2:1), mw, 140 °C, 30 min, 100 W, 67–78%; (g) LiAlH₄, THF dry, 0 °C, 30 min, 56–82%; (h) PPh₃, DEAD, THF dry, r.t., 18 h, 72–88%; (b) hydrazine, DCM, r.t., 2 h, 92–96%.

The synthesis of the final compounds 29q–u started from the appropriate heterocycle 26q–u carrying an aldehyde group that was reduced to primary alcohol (27q–u). These intermediates reacted with N-hydroxyphthalimide through a Mitsunobu reaction to obtain the compounds (28q–u), and finally, the amino group was deprotected with hydrazine to obtain the desired final compounds 29q–u (Scheme 5).

Scheme 5. Synthesis of Compounds 29q–u.

Reagents and conditions. (g) LiAlH₄, THF dry, 0 °C, 30 min, 74–80%; (h) PPh₃, DEAD, THF dry, r.t., 18 h, 65–73%; (b) hydrazine, DCM, r.t., 2 h, 90–94%.

Test of Synthesized AGT Ligands on Purified Wild-Type and Mutant AGT

We tested the synthesized AGT ligands using the same experimental approach described above and aimed at defining (a) the binding of each compound at the active site, (b) the kinetic parameters of the inhibition, and (c) the PC activity on AGT expressed in mammalian cells. All synthesized compounds except 13h, 13i, 29q, and 29t induced spectral changes indicating their binding at the active site of both AGTwt and the G41R variant generating the oxime intermediate (Figure S3). No signal of binding was observed in the case of 13h and 13i, while a very slow binding rate was observed for compounds 29q and 29t (data not shown). The observed IC₅₀ values in the low micromolar or nanomolar range suggest that chemical optimization has improved binding potency (Table 3). Notably, we could only establish an upper limit for the IC₅₀ value of compounds 29r, 10f, 25m, 25p, 29s, and 29u for the variant because the experimental conditions did not allow further reduction of the concentration of the inhibitor.

Table 3. IC₅₀ Values of Synthesized Compounds on Wild-Type AGT and G41R Variant in Purified Forms.

	wild-type AGT	G41R variant
compound	IC50 (μM)	IC50 (μM)
10a	0.12 ± 0.02	0.40 ± 0.07
10b	0.3 ± 0.1	1.4 ± 0.3
10c	0.06 ± 0.01	0.9 ± 0.1
10d	0.3 ± 0.1	1.8 ± 0.1
10e	0.16 ± 0.04	1.1 ± 0.1
10f	0.20 ± 0.01	<0.2
10g	0.040 ± 0.006	0.10 ± 0.02
20j	0.85 ± 0.07	20 ± 5
20k	1.8 ± 0.1	1.7 ± 0.7
20l	4.6 ± 0.5	11 ± 2
25m	0.23 ± 0.03	<0.2
25o	0.55 ± 0.03	0.37 ± 0.03
25p	0.28 ± 0.02	<0.2
29r	0.23 ± 0.01	<0.2
29s	0.35 ± 0.02	<0.2
29u	0.62 ± 0.08	<0.2

We then determined the kinetic parameters of the inhibition (Table 4). Many compounds displayed inhibition constants in the nanomolar range, thus further confirming that the rational optimization has been successful in improving the inhibition potency. In line with our previous hypothesis, compounds showing the highest binding potency are those with substituents able to strengthen the cation−π interaction between Arg360 and the aromatic ring (10g, 25m, 10a, 10b, 10c). The observed trend, supporting a pivotal role of electronic interaction with Arg360, is also highlighted by the observation that (i) compounds bearing a longer spacer for the aminooxy group are inactive (13h and 13i) likely because they do not properly accommodate in the enzyme active site, thus hampering the formation of the cation−π interaction with Arg360, and (ii) the substitution of the phenyl ring with heteroaromatic rings (29q and 29t) has detrimental effects on binding potency, and this behavior is reversed when the heteroaromatic ring is substituted with electron-rich groups (29s and 29u). It can be observed that most of the compounds active on wild-type AGT are also active on the G14R variant. The slight differences observed between the two forms can be ascribed to subtle active site changes that the mutation causes through the loop 24-32 and helix 48-62 connected to the PLP binding pocket, as previously mentioned.^25,26

Table 4. Inhibition Constant (K_I) and Association (k₁) and Dissociation (k_–1) Kinetic Rate Constants of Synthesized Compounds^a.

	wild-type AGT			G41R variant
compound	KI (μM)	k1 (μM–1 min–1) × 10–2	k–1 (min–1)	KI (μM)	k1 (μM–1 min–1) × 10–2	k–1 (min–1)
10a	0.05 ± 0.01	0.060 ± 0.007	0.030 ± 0.005	1.2 ± 0.1	0.07 ± 0.03	∼0.08
10b	0.086 ± 0.007	10.5 ± 0.5	0.01 ± 0.004	0.13 ± 0.03	1.1 ± 0.1	∼0.001
10c	3.78 ± 0.02	0.14 ± 0.01	0.07 ± 0.01	∼0.03	0.22 ± 0.04	∼0.007
10d	17 ± 0.03	0.010 ± 0.006	0.13 ± 0.03	15.3 ± 0.1	0.010 ± 0.003	0.12 ± 0.06
10e	0.40 ± 0.03	0.17 ± 0.01	0.07 ± 0.03	2 ± 0.2	0.13 ± 0.05	∼0.2
10f	2 ± 0.006	2.6 ± 0.2	0.050 ± 0.005	1.20 ± 0.01	1.9 ± 0.3	∼0.02
10g	0.0020 ± 0.0003	15.5 ± 4	∼0.0003	0.99 ± 0.0002	0.90 ± 0.02	0.0090 ± 0.0003
20j	n.a.			0.60 ± 0.01	0.22 ± 0.02	∼0.001
20k	0.24 ± 0.02	0.80 ± 0.01	∼0.002	5.70 ± 0.03	1.3 ± 0.2	0.08 ± 0.03
20l	110 ± 0.01	0.095 ± 0.013	0.10 ± 0.01	n.a.
25m	0.027 ± 0.003	14.5 ± 2.5	∼0.004	<0.015	24 ± 2	<0.003
25o	0.72 ± 0.01	3.6 ± 0.3	0.02 ± 0.01	1.40 ± 0.02	1.8 ± 0.3	∼0.02
25p	3.50 ± 0.01	2.6 ± 0.2	0.10 ± 0.01	0.24 ± 0.02	7.2 ± 0.6	∼0.02
29r	2 ± 0.005	4.1 ± 0.2	0.080 ± 0.004	1.40 ± 0.04	4 ± 1	∼0.06
29s	0.11 ± 0.02	9.8 ± 0.4	∼0.01	0.80 ± 0.02	8.6 ± 0.6	0.07 ± 0.02
29u	4.60 ± 0.01	0.80 ± 0.05	0.04 ± 0.01	<0.015	2.30 ± 0.06	<0.0003

^an.a., not available.

Test of Synthesized AGT Ligands on Wild-Type and Mutant AGT Expressed in Mammalian Cells

We tested the effect of synthesized compounds on AGT expression and specific activity in CHO-GO-AGTwt and CHO-GO-G41R cells (Figure 6A,B). We did not observe any increase in specific activity of AGTwt and G41R upon culturing cells in the presence of compounds 10e, 10a, 10c, 10g, 10b, 20j, 10f, 25m, or 25p, although there was an increase in protein levels in the western blot in the case of compounds 25m and 25p. On the other hand, the specific activity of the G41R variant showed a significant increase upon culturing cells in the presence of compounds 10d, 20l, 29r, 25o, 29s, and 29u. These changes were not always associated with comparable increased protein levels in the soluble fraction of the lysate. Nevertheless, it must be mentioned that western blot analyses measure protein levels under denaturing conditions, thus implying that they do not allow one to distinguish between folded and unfolded AGT. Thus, it can be hypothesized that compounds 10d, 20l, 29r, 25o, 29s, and 29u shift the equilibrium toward the native state without affecting the global synthesis and/or degradation rates of AGT. Notably, the treatment with compounds 10e, 10d, 10c, 10b, and 29r led to a decrease in AGTwt specific activity that was not paired by an equivalent reduction in protein levels. This effect is also observed with the variant in the case of compound 10a. The most probable explanation is that compounds 10e, 10d, 10c, 10b, and 29r bind so tightly at the active site that they do not dissociate from the enzyme upon cell lysis and dilution in the reaction mixture, thus resulting in apparent inhibition.

Figure 6.

Effects of synthesized compound treatment on AGTwt and the G41R variant expressed in mammalian cells. CHO-GO-AGTwt and CHO-GO-AGT-G41R cells were grown for 7 days in the presence of 50 μM of each compound, as indicated. At the end of treatment, cells were detached and lysed, and the soluble fraction of the lysate was used for (A) transaminase activity determination. The specific activity of AGT in CHO-GO-AGTwt control cells (191 ± 10 nmol of pyruvate/min/mg protein) and in CHO-GO-AGT-G41R control cells (6.8 ± 0.7 nmol of pyruvate/min/mg protein) was assumed to be 1 to help assess the changes. Data represent mean ± SEM (n = 7). *p < 0.05 vs control cells. (B) AGT protein level quantification by western blot. AGT levels in CHO-GO-AGTwt and CHO-GO-AGT-G41R control cells were assumed to be 1 to help assess the changes. GAPDH has been used as the loading control. The images are representative of one out of three separate experiments. Data represent mean ± SEM (n = 4). *p < 0.05 vs control cells.

In combination with PN, compounds 10e, 10d, 10c, and 10b did not change AGTwt activity but reduced the one of the G41R variant due to an apparent inhibition, as shown by the fact that the reduced activity is compounded by reduced protein levels only in the case of compound 10d. Compounds 10a, 29r, 10f, 25m, 25p, 25o, 29s, and 29u cause an increase of AGTwt activity that is accompanied by increased protein levels in the case of 10f, 25o, and 29u. Compounds 10a, 29r, and 10f have no effect on the variant, while compounds 25 m, 25p, 29s, and 29u increase the variant protein levels without affecting specific activity. This would suggest that the compounds could play a chaperone role but remain at least partly bound at the active site, thus causing inhibition. Finally, only compounds 20l and 25o increased the specific activity of the G41R variant, an effect accompanied by an increase in protein levels in the case of 25o.

To select the best hit among the tested molecules, we performed a ranking of the compounds based on their effect on specific activity and expression levels of AGTwt and the G41R variant. Based on this analysis, we identified five compounds as the best hits for each form of the enzyme (Table S1). We then evaluated the viability of both CHO-GO-AGTwt and CHO-GO-G41R cells upon treatment with each inhibitor in the absence or presence of PN to have insights into any toxic effect (Figure S5). The viability of CHO-GO-AGTwt did not change in the presence of compounds 10d, 25o, 29s, and 29u, while it was reduced in the presence of compound 20l. On the other hand, the viability of CHO-GO-G41R cells increased in the presence of compound 10d and compounds 29u and 25o without PN or in the presence of compounds 25o and 29u and PN, while it slightly decreased in the presence of compound 20l with or without PN.

Overall, by pairing the data obtained on AGT expression and activity with those on cell viability, we could observe that (i) the five selected compounds (10d, 20l, 25o, 29s, 29u) increase the specific activity of G41R, a model of a misfolded variant, although with different efficiency; (ii) compounds 20l and 25o lead to improved activity and to improved or unaltered expression in the absence and in the presence of PN in both AGTwt and G41R variant, and they do not affect cell viability. Since the effects of compound 25o are higher than those of compound 20l, we chose compound 25o as the best hit for subsequent studies.

In line with our previous observations, compounds showing the best chaperone activity in the cellular system are those showing an intermediate affinity for AGT, and also in this case, compounds with the smallest differences between association and dissociation rate constants seem to be the most promising (25o, 20l, and 29u).

Chaperone Effect of Compound 25o on Common AGT Variants Associated with PH1

Over 200 mutations have been identified in the AGXT gene, some of the most common missense being the G170R and I244T, and F152I replacements. All these mutations are pathogenic only on the background of the minor allele^5,41−44 Moreover, patients bearing the G170R or the F152I mutation on the minor allele are responsive to vitamin B6.¹⁴ We evaluated whether compound 25o was able to modulate the specific activity and expression level of AGT of CHO-GO-AGT-Mi cells, which exhibit a reduction of 30% of specific activity with respect to CHO-GO-AGTwt, and of cells expressing the pathogenic forms: CHO-GO-G170R-Mi, CHO-GO-I244T-Mi, and CHO-GO-F152I-Mi, in the absence or presence of PN (Figure 7).

Figure 7.

Action of compound 25o as pharmacological chaperone for common pathogenic AGT variants. CHO-GO-AGTwt, CHO-GO-AGT-Mi, CHO-GO-G170R-Mi, CHO-GO-I244T-Mi, and CHO-GO-F152I-Mi cells were grown for 7 days in the absence or presence of 50 μM 25o and 10 μM PN. At the end of treatment, cells were detached and lysed, and the soluble fraction of each sample used for (A) AGT enzymatic activity determination. The AGT specific activity of control cells of each clone was assumed to be 1 to help assess the changes (CHO-GO-AGTwt cells: 191 ± 10 nmol of pyruvate/min/mg protein; CHO-GO-AGT-Mi: 132 ± 9 nmol of pyruvate/min/mg protein; CHO-GO-G170R-Mi: 54 ± 7 nmol of pyruvate/min/mg protein; CHO-GO-I244T-Mi: 28 ± 5 nmol of pyruvate/min/mg protein; CHO-GO-F152I-Mi 24 ± 5 nmol of pyruvate/min/mg protein). Data represent mean ± SEM (n = 3). *p < 0.05 vs respective control cells. ^#p < 0.05 vs respective PN-treated cells. (B) AGT expression level quantification. AGT levels in control cells of each clone were assumed to be 1 to help assess the changes. GAPDH has been used as loading control. The images are representative of one out of three separate experiments. Data represent mean ± SEM (n = 3). *p < 0.05 vs respective control cells. ^#p < 0.05 vs respective PN-treated cells.

We confirmed that PN treatment results in the inhibition of AGTwt and AGT-Mi activity, while it causes an increase of protein levels and/or specific activity of the pathogenic variants.⁴⁵ In addition, we found that compound 25o caused (i) an increase in the specific activity and expression levels of AGT-Mi both in the absence and in the presence of PN. The latter effect is analogous to that observed in the case of AGTwt except for a more marked increase in protein levels that is probably due to the enhanced tendency to degradation caused by the P11L polymorphic mutation typical of the minor allele^46,47 and (ii) an increase in the specific activity of G170R-Mi in the absence of PN. On the one hand, since the G170R-Mi variant is usually responsive to PN both in vitro and in patients,⁴⁶⁻⁴⁸ it could be argued that compound 25o is not able to induce additive effects on a PN-treated background. However, it cannot be excluded that, under in vivo conditions, the different metabolism of PN and compound 25o could give to patients expressing the G170R-Mi variant a significant benefit from a combined treatment. Compound 25o also caused (iii) an increase in the specific activity and protein levels of I244T-Mi in the presence of PN. Data obtained in mammalian cells indicate that the I244T-Mi variant is highly prone to aggregation but is mainly present as holoenzyme.⁴⁶ Thus, compound 25o could exert its PC action on the holo-form by increasing protein solubility. Lastly, it also caused (iv) a small but statistically significant increase of F152I-Mi specific activity in co-treatment with PN, accompanied by increased protein levels also in the presence of the compound alone. The F152I-Mi variant shows very low expression levels, which can be rescued only by the concomitant presence of the cofactor and compound 25o, which can possibly cooperate to promote the achievement of the native structure. Notwithstanding the different responsiveness of the variants, our data suggest that compound 25o might represent a PC for common pathogenic forms of AGT displaying conformational defects. Nevertheless, it must be taken into account that the treatment of cells expressing PH1-associated variants does not allow them to reach the same protein levels and specific activity of cells expressing the nonpathogenic forms AGT-Ma and AGT-Mi, thus implying that further compound optimization will be necessary.

Conclusions

In this work, we used ligand-based drug discovery approaches based on in silico experiments to select and synthesize putative candidates as PCs for AGT. We identified a novel hit compound (25o) able to bind the enzyme with high affinity and stabilize the protein in a cellular environment. Our data suggest that compound 25o could counteract conformational defects caused by some of the most common mutations associated with PH1. In this regard, although promising treatment options for PH1 based on the RNA interference technology have been recently approved by both the FDA and EMA and others are currently tested at the clinical level,^49,50 the availability of treatment strategies based on small-molecule drugs is an unmet need. They could represent a noninvasive and cheap preemptive approach for patients affected by milder forms of the disease, as well as the only option for patients who have no access to biological drugs.

Besides their significance in the possible future development of a pharmacological therapy for PH1, our results also give interesting insights into the possible correlation between the kinetic parameters of the ligand–protein interaction and the PC activity in a biological environment of a cell. Since classical PC targeting enzymes are designed as competitive inhibitors to exploit the active site and increase binding specificity,⁵¹ a suitable balance between the inhibitor and chaperone activity should be achieved to maximize the efficiency as PC.⁵² Our data suggest that the best candidates are not those endowed with the highest affinity for the target but rather those showing higher values of kinetic association and dissociation constants. This could be due to the possibility to establish a rapid equilibrium, which on the one hand can promote the chaperone effect by preventing accumulation of partly folded intermediates, while on the other can allow the dissociation of the inhibitor once the native structure is achieved in the presence of the physiological substrate. Although the predictive character of the data must be taken with care, because possible differences of compound permeability and folding kinetic aspects of the mutants are not considered, the combination of molecular and cellular data on putative PCs could be very useful to guide the drug discovery process, paving the way for further medicinal chemistry optimization strategies.

Experimental Section

Chemistry

All the reagents were purchased from Sigma-Aldrich, Alfa-Aesar, and Enamine at reagent purity and, unless otherwise noted, were used without any further purification.

Dry solvents used in the reactions were obtained by distillation of technical-grade materials over appropriate dehydrating agents. Microwave reactions were performed using the CEM microwave synthesizer Discover model. Reactions were monitored by thin layer chromatography on silica gel coated aluminum foils (silica gel on Al foils, SUPELCO Analytical, Sigma-Aldrich) at both 254 and 365 nm wavelengths. When indicated, intermediates and final products were purified through silica gel flash chromatography (silica gel, 0.040–0.063 mm) using appropriate solvent mixtures. ¹H NMR and ¹³C NMR spectra were recorded on a BRUKER AVANCE spectrometer at 300, 400, and 100 MHz, respectively, with TMS as internal standard. ¹H NMR spectra are reported in this order: multiplicity and number of protons. Standard abbreviations indicating the multiplicity were used as follows: s = singlet, d = doublet, dd = doublet of doublets, t = triplet, q = quadruplet, m = multiplet and br = broad signal. HPLC/MS experiments were performed with HPLC instrumentation (Agilent 1100 series, equipped with a Waters Symmetry C18, 3.5 μm, 4.6 × 75 mm column) and MS instrumentation (Applied Biosystem/MDS SCIEX, with API 150EX ion source). An Accela UHPLC system (Thermo, USA) equipped with a Waters XSelect HSS T3 column (100 × 2.1 mm i.d., 3.5 μm particle size; Waters, USA) was used for chromatographic separation. A Thermo TSQ Quantum Access Max triple quadrupole mass spectrometer (Thermo, San Jose, CA, USA) equipped with a heated electrospray ionization (H-ESI) source was employed for compound detection (see SI Annex 1). HRMS experiments were performed with an LTQ ORBITRAP XL THERMO.

All compounds were tested as 95% purity samples or higher (by HPLC/MS).

General Procedure for the Synthesis of Compounds 8a–g and 12h–i

The appropriate benzyl bromide 6a–g (2 equiv) and anhydrous potassium carbonate (0.8 equiv) were added to a solution of N-hydroxyphtalimide (1 equiv) in DMSO (1.5 mL/mmol). The resulting mixture was stirred for 18 h at room temperature and then was checked by TLC. Then 3 mL/mmol of cold water was added, and the resulting mixture was stirred for 30 min. The obtained white precipitate was filtered and washed with water (×3) to give the products as white powder. Yields: 82–96%.

2-((3-Bromobenzyl)oxy)isoindoline-1,3-dione (8a)

¹H NMR (300 MHz, CDCl₃) δ 7.87–7.71 (m, 5H); 7.54–7.50 (m, 2H); 7.31–7.26 (m, 1H); 5.19 (s, 2H).

LC–MS calcd for C₁₅H₁₀BrNO₃ ([M + H]⁺) 330.98; found 333.14.

2-((4-Fluorobenzyl)oxy)isoindoline-1,3-dione (8b)

¹H NMR (300 MHz, CDCl₃) δ 7.92–7.81 (m, 4H); 7.08 (t, J = 9, 4H); 5.20 (s, 2H).

LC–MS calcd for C₁₅H₁₀FNO₃ ([M + H]⁺) 272.06; found 272.24.

2-((4-Chlorobenzyl)oxy)isoindoline-1,3-dione (8c)

¹H NMR (300 MHz, CDCl₃) δ 7.86–7.75 (m, 4H); 7.51–7.38 (m, 4H); 5.14 (s, 2H).

LC–MS calcd for C₁₅H₁₀ClNO₃ ([M + H]⁺) 288.03; found 288.69.

2-((2,4-Difluorobenzyl)oxy)isoindoline-1,3-dione (8d)

¹H NMR (300 MHz, CDCl₃) δ 7.77–7.75 (m, 4H); 7.60–7.52 (3H); 5.27 (s, 2H).

LC–MS calcd for C₁₅H₉F₂NO₃ ([M + H]⁺) 290.05; found 290.23.

2-((4-Methylbenzyl)oxy)isoindoline-1,3-dione (8e)

¹H NMR (300 MHz, CDCl₃) δ 7.84–7.73 (m, 4H); 7.44–7.20 (m, 4H); 5.19 (s, 2H); 2.37 (s, 3H).

LC–MS calcd for C₁₆H₁₃NO₃ ([M + H]⁺) 268.08; found 268.27.

2-([1,1′-Biphenyl]-4-ylmethoxy)isoindoline-1,3-dione (8f)

¹H NMR (300 MHz, CDCl₃) δ 7.86–7.74 (m, 4H); 7.64–7.60 (m, 6H); 7.49–7.37 (m, 3H); 5.28 (s, 2H).

LC–MS calcd for C₂₁H₁₅NO₃ ([M + H]⁺) 330.10; found 330.34.

2-(Naphthalen-2-ylmethoxy)isoindoline-1,3-dione (8g)

¹H NMR (300 MHz, DMSO) δ 8.03–7.86 (m, 8H); 7.68–7.54 (m, 3H); 5.34 (s, 2H).

LC–MS (ESI) calculated for C₁₉H₁₃NO₃ ([M + H]⁺) 304.08; found 304.31.

2-Phenethoxyisoindoline-1,3-dione (12h)

¹H NMR (300 MHz, CDCl₃) δ 7.71–7.7.59 (m, 4H); 7.28–7.23 (m, 5H); 4.37 (t, J = 6, 2H); 3.07 (t, J = 6, 2H).

LC–MS calcd for C₁₆H₁₃NO₃ ([M + H]⁺) 268.08; found 268.27.

2-(4-Methoxyphenethoxy)isoindoline-1,3-dione (12i)

¹H NMR (300 MHz, CDCl₃) δ 7.87–7.75 (m, 4H); 7.24 (d, J = 9, 2H); 7.16 (d, J = 9, 2H); 4.42 (t, J = 6, 2H); 3.83 (s, 3H). 3.53 (t, J = 6, 2H);

LC–MS calcd for C₁₇H₁₅NO₄ ([M + H]⁺) 298.10; found 298.30.

Procedure for the Synthesis of Compound 15

To a solution of 3-bromobenzaldehyde 14 (1 equiv) in dry toluene (3 mL/mmol), propane-1,3-diol (1.2 equiv) and p-toluenesulfonic acid (0,006 equiv) were added. The reaction mixture was heated at 110 °C for 18 h, and then it was controlled by TLC. The solvent was evaporated. After addition of H₂O, the organic layer was separated, and the aqueous layer was extracted with dichloromethane (×3). The organic layer was washed with brine and dried over anhydrous Na₂SO₄. After removal of the solvent, the crude material was purified by column chromatography with hexane/ethyl acetate 9:1 as eluent. The desired products were obtained as colorless oils with 92% yields.

2-(3-Bromophenyl)-1,3-dioxolane (15)

¹H NMR (300 MHz, CDCl₃) δ 7.53–7.38 (m, 3H); 5.74 (s, 1H); 4.09–3.98 (m, 4H).

LC–MS calcd for C₉H₉BrO₂ ([M + H]⁺) 229.97; found 229.07.

General Procedure for the Synthesis of Compounds 17j-l

To a solution of compound 15 (1 equiv) in dry toluene (3 mL/mmol), under nitrogen flux, the suitable cyclic amines 16j–l (1.2 equiv), Pd₂(dba)₃ (0.005 equiv), BINAP (0.015 equiv), and NaOtBu (1.7 equiv) were added. The reaction mixture was stirred for 18 h at 100 °C. A TLC, with petroleum ether/ethyl acetate (9:1) as eluent, showed complete consumption of the starting material. HCl 1 N was added gradually at 0 °C until pH 1. The mixture was stirred at 0 °C; after 3 h, NaOH 1 N was added until pH 11. Ethyl acetate was added, and the crude was extracted and then washed with brine. The organic phase was dried over anhydrous Na₂SO₄, filtered, and concentrated under reduced pressure. The desired product was purified by silica flash chromatography by elution with petroleum ether/ethyl acetate from 95:5 to 7:3. The desired products were obtained as colorless oils with 56–68% yields.

3-Morpholinobenzaldehyde (17j)

¹H NMR (300 MHz, CDCl₃) δ 9.98 (s, 1H); 7.48–7.18 (m, 3H); 3.89 (t, J = 6, 2H); 3.24 (t, J = 6, 2H).

LC–MS calcd for C₁₁H₁₃NO₂ ([M + H]⁺) 192.09; found 192.22.

3-(Pyrrolidin-1-yl)benzaldehyde (17k)

¹H NMR (300 MHz, CDCl₃) δ 9.94 (s, 1H); 7.67–7.55 (m, 3H); 3.33–3.29 (m, 4H); 2.05–2.00 (m, 4H).

LC–MS calcd for C₁₁H₁₃NO ([M + H]⁺) 176.09; found 176.22.

3-(4-Methylpiperazin-1-yl)benzaldehyde (17l)

¹H NMR (300 MHz, CDCl₃) δ 9.90 (s, 1H); 7.38–7.12 (m, 3H); 3.25–3.22 (m, 4H); 2.56–2.52 (m, 4H); 2.31 (s, 3H).

LC–MS calcd for C₁₂H₁₆N₂O ([M + H]⁺) 205.12; found 205.26.

General Procedure for the Synthesis of Compounds 22m–p

A microwave tube was charged with Pd(PPh₃)₄ (0.02 equiv), the proper boronic acid pinacol ester 21m–p (2 equiv), and cesium carbonate (2 equiv). The tube was purged with argon three times, and then a solution of compound 14 (1 equiv) in a mixture of DME/H₂O 2:1 .3 mL/mmol) was injected in the reaction mixture that was then heated in a microwave reactor for 30 min at 140 °C at 100 W power. A TLC, with the proper eluent, showed complete consumption of the starting material. Afterward, the reaction mixture was filtered through a plug of Celite, the filtrate was concentrated under reduced pressure, and the residue was purified by flash column chromatography with the proper eluent. The desired products were obtained as colorless oils with 67–78% yields.

[1,1′-Biphenyl]-3-carbaldehyde (22m)

¹H NMR (300 MHz, CDCl₃) δ 10.12 (s, 1H); 8.14 (s, 1H); 7.91–7.87 (m, 2H); 7.67–7.61 (m, 3H); 7.53–7.40 (m, 3H).

LC–MS calcd for C₁₃H₁₀O ([M + H]⁺) 183.07; found 183.21.

3-(2-Aminopyrimidin-5-yl)benzaldehyde (22n)

¹H NMR (300 MHz, DMSO) δ 10.07 (s, 1H); 8.67 (s, 2H); 8.22–8.17 (m, 1H); 8.00–7.97 (d, J = 9, 1H); 7.86–7.83 (d, J = 9, 1H); 7.66 (m, 1H); 6.89 (s, 2H).

LC–MS calcd for C₁₁H₉N₃O ([M + H]⁺) 200.07; found 200.20.

4′-(Trifluoromethyl)-[1,1′-biphenyl]-3-carbaldehyde (22o)

¹H NMR (300 MHz, CDCl₃) δ 10.12 (s, 1H); 8.13 (s, 1H); 7.95–7.86 (m, 2H); 7.75 (s, 4H); 7.69–7.64 (m, 1H).

LC–MS calcd for C₁₄H₉F₃O ([M + H]⁺) 251.06; found 251.21.

4′-Fluoro-[1,1′-biphenyl]-3-carbaldehyde (22p)

¹H NMR (300 MHz, CDCl₃) δ 10.11 (s, 1H); 8.08 (s, 1H); 8.07–7.82 (m, 2H); 7.66–7.58 (m, 3H); 7.22–7.16 (m, 2H).

LC–MS calcd for C₁₃H₉FO ([M + H]⁺) 201.17; found 201.45.

General Procedure for the Synthesis of Compounds 18j–l, 23m–p, and 27q–u

LiAlH₄ (4 equiv) was added in a round-bottomed flask containing dry THF (4 mL/mmol) under nitrogen flux, then the reaction mixture was stirred at 0 °C, and the appropriate aldehyde 17j–l, 22m-–p, or 26q–u (1 equiv) was added. After 30 min, a TLC, with dichloromethane/methanol (95:5) as eluent, showed complete consumption of the starting material. A solution of NaOH 1 N was added dropwise until pH 11 at 0 °C. Ethyl acetate was added, and the crude was extracted and then washed with brine. The organic phase was dried over anhydrous Na₂SO₄, filtered, and concentrated under reduced pressure. The desired product was purified by silica flash chromatography by elution with dichloromethane/methanol from 99:1 to 95:5. The desired products were obtained as colorless oils with 43–82% yields.

(3-Morpholinophenyl)methanol (18j)

¹H NMR (300 MHz, CDCl₃) δ 7.24 (d, J = 6, 1H); 6.90–6.81 (m, 3H); 4.59 (s, 2H); 3.82–3.74 (m, 4H); 3.12–3.08 (m, 5H).

LC–MS calcd for C₁₁H₁₅NO₂ ([M – H]⁻) 192.11; found 192.24.

(3-(Pyrrolidin-1-yl)phenyl)methanol (18k)

¹H NMR (300 MHz, CDCl₃) δ 7.25 (t, J₁ = 9, J₂ = 15, 1H); 6.90–6.81 (m, 3H); 4.59 (s, 2H); 3.79 (s, 1H); 3.82 (t, J = 6, 4H); 3.12 (t, J = 6, 4H).

LC–MS calcd for C₁₁H₁₅NO ([M – H]⁻) 176.11; found 176.24.

(3-(4-Methylpiperazin-1-yl)phenyl)methanol (18l)

¹H NMR (300 MHz, CDCl₃) δ 7.24 (t, J = 9, 1H); 6.94 (s, 1H); 6.85 (d, J = 9, 2H); 4.64 (s, 2H); 3.53–3.17 (m, 4H); 2.88 (s, 1H); 2.57–2.49 (m, 4H); 2.35 (s, 3H).

LC–MS calcd for C₁₂H₁₈N₂O ([M – H]⁻) 205.14; found 205.28.

[1,1′-Biphenyl]-3-ylmethanol (23m)

¹H NMR (300 MHz, CDCl₃) δ 7.73–7.56 (m, 4H); 7.47–7.37 (m, 5H); 4.67 (s, 2H); 3.65 (s, 1H).

LC–MS calcd for C₁₃H₁₂O ([M – H]⁻) 183.08; found 183.23.

(3-(2-Aminopyrimidin-5-yl)phenyl)methanol (23n)

¹H NMR (300 MHz, DMSO) δ 8.67 (s, 2H); 7.53–7.26 (m, 4H); 6.76 (s, 2H); 5.22 (t, J = 6, 1H); 4.54 (d, J = 6, 2H).

LC–MS calcd for C₁₁H₁₁N₃O ([M – H]⁻) 200.09; found 200.22.

(4′-(Trifluoromethyl)-[1,1′-biphenyl]-3-yl)methanol (23o)

¹H NMR (300 MHz, CDCl₃) δ 7.72 (s, 4H); 7.69–7.64 (m, 4H); 4.82 (s, 2H); 3.71 (s, 1H).

LC–MS calcd for C₁₄H₁₁F₃O ([M – H]⁻) 251.07; found 251.23.

(4′-Fluoro-[1,1′-biphenyl]-3-yl)methanol (23p)

¹H NMR (300 MHz, DMSO) δ 7.70–7.64 (m, 2H); 7.58 (s, 1H); 7.51–7.41 (m, 2H); 7.32–7.27 (m, 3H); 5.27 (t, J = 6, 1H); 4.57 (d, J = 6, 2H).

LC–MS calcd for C₁₃H₁₁FO ([M – H]⁻) 201.07; found 201.22.

Pyridin-3-ylmethanol (27q)

¹H NMR (300 MHz, CDCl₃) δ 8.47–8.39 (m, 2H); 7.73–7.70 (m, 1H); 7.27–7.24 (m, 1H); 4.68 (s, 2H); 3.88 (s, 1H).

LC–MS calcd for C₆H₇NO ([M – H]⁻) 108.05; found 108.12.

Benzofuran-2-ylmethanol (27r)

¹H NMR (400 MHz, CDCl₃) δ 7.58 (d, J = 6, 1H); 7.49 (d, J = 6, 1H); 7.33–7.23 (m, 2H); 6.69 (s, 1H); 4.80 (6, J = 6, 2H); 2.05 (t, J = 6, 1H).

LC–MS calcd for C₉H₈O₂ ([M – H]⁻) 147.05; found 147.15.

Benzo[b]thiophen-2-ylmethanol (27s)

¹H NMR (300 MHz, CDCl₃) δ 7.86–7.74 (m, 2H); 7.40–7.31 (m, 2H); 7.26–7.23 (m, 1H); 4.97 (s, 2H); 3.96 (s, 1H).

LC–MS calcd for C₉H₈OS ([M – H]⁻) 163.02; found 163.22.

Thiophen-2-ylmethanol (27t)

¹H NMR (300 MHz, CDCl₃) δ 7.40 (d, J = 9, 1H); 6–96-6.90 (m, 1H); 6.85–6.79 (m, 1H); 4.85 (s, 1H); 3.85 (s, 1H).

LC–MS calcd for C₅H₆OS ([M – H]⁻) 113.01; found 113.16.

(4-Methoxy-3,5-dimethylpyridin-2-yl)methanol (27u)

¹H NMR (300 MHz, CDCl₃) δ 8.45 (s, 1H); 5.07 (s, 1H); 3.75 (s, 1H); 3.68 (s, 1H); 2.93 (s, 6H).

LC–MS calcd for C₉H₁₃NO₂ ([M – H]⁻) 166.09; found 166.20.

General Procedure for the Synthesis of Compounds 19j–l, 24m–p, and 28q–u

The appropriate alcohol (1 equiv) (18j–l, 23m–p, 27q–u) was dissolved in dry THF (3 mL/mmol) under nitrogen flux, and then N-hydroxyphtalimide 7 (1 equiv), PPh₃ (1.1 equiv), and DEAD (1 equiv) were added at room temperature. The reaction mixture was stirred at room temperature for 18 h. A TLC, with the proper eluent, showed complete consumption of the starting material. The solvent was evaporate under a vacuum, and the product was obtained by trituration with MeOH as white powder with 67–88% yields.

2-((3-Morpholinobenzyl)oxy)isoindoline-1,3-dione (20j)

¹H NMR (300 MHz, CDCl₃) δ 7.74–7.63 (m, 4H); 7.19 (t, J = 6, 1H); 7.07 (s, 1H); 6.94–6.82 (m, 2H); 5.12 (s, 2H); 3.82–3.74 (m, 4H); 3.12–3.08 (m, 4H).

LC–MS calcd for C₁₉H₁₈N₂O₄ ([M + H]⁺) 339.12; found 339.35.

2-((3-(Pyrrolidin-1-yl)benzyl)oxy)isoindoline-1,3-dione (20k)

¹H NMR (300 MHz, CDCl₃) δ 7.77–7.66 (m, 4H); 7.17 (t, J = 6, 1H); 6.77–6.58 (m, 2H); 6.53–6.49 (m, 1H); 5.16 (s, 2H); 3.36 (t, J = 6, 4H); 1.97 (t, J = 6, 4H).

LC–MS calcd for C₁₉H₁₈N₂O₃ ([M + H]⁺) 323.13; found 323.35.

2-((3-(4-Methylpiperazin-1-yl)benzyl)oxy)isoindoline-1,3-dione (20l)

¹H NMR (300 MHz, CDCl₃) δ 7.84–7.72 (m, 4H); 7.29–7.24 (m, 1H); 7.14 (s, 1H); 7.01–6.91 (m, 2H); 5.29 (s, 2H); 3.29 (t, J = 6, 4H); 2.65 (t, J = 6, 4H); 2.41 (s, 3H).

LC–MS calcd for C₂₀H₂₁N₃O₃ ([M + H]⁺) 352.15; found 352.39.

2-([1,1′-Biphenyl]-3-ylmethoxy)isoindoline-1,3-dione (24m)

¹H NMR (300 MHz, CDCl₃) δ 8.14 (s, 1H); 7.91–7.78 (m, 6H); 7.67–7.61 (m, 3H); 7.53–7.40 (m, 3H); 5.31 (s, 2H).

LC–MS calcd for C₂₁H₁₅NO₃ ([M + H]⁺) 330.10; found 330.34.

2-((3-(2-Aminopyrimidin-5-yl)benzyl)oxy)isoindoline-1,3-dione (24n)

¹H NMR (300 MHz, DMSO) δ 8.56 (s, 2H); 7.86 (s, 4H); 7.67–7.46 (m, 4H); 7.47 (d, J = 6, 2H); 6.81 (s, 2H); 5.24 (s, 2H).

LC–MS calcd for C₁₉H₁₄N₄O₃ ([M + H]⁺) 347.10; found 347.33.

2-((4′-(Trifluoromethyl)-[1,1′-biphenyl]-3-yl)methoxy)isoindoline-1,3-dione (24o)

¹H NMR (300 MHz, CDCl₃) δ 7.85–7.51 (m, 8H); 5.32 (s, 2H).

LC–MS calcd for C₂₂H₁₄F₃NO₃ ([M + H]⁺) 398.09; found 398.34.

2-((4′-Fluoro-[1,1′-biphenyl]-3-yl)methoxy)isoindoline-1,3-dione (24p)

¹H NMR (400 MHz, DMSO) δ 8.01–7.95 (m, 1H); 7.86 (s, 4H); 7.73–7.67 (m, 3H); 7.51–7.47 (m, 2H); 7.31 (t, J = 6, 2H); 5.26 (s, 2H).

LC–MS calcd for C₂₁H₁₄FNO₃ ([M + H]⁺) 348.09; found 348.33.

2-(Pyridin-3-ylmethoxy)isoindoline-1,3-dione (28q)

¹H NMR (300 MHz, CDCl₃) δ 8.71 (s, 1H); 8.66–8.64 (m, 2H); 8.02–7.98 (m, 1H); 7.86–7.75 (m, 4H); 7.41–7.36 (m, 1H); 5.26 (s, 2H).

LC–MS calcd for C₁₄H₁₀N₂O₃ ([M + H]⁺) 255.06; found 255.24.

2-(Benzofuran-2-ylmethoxy)isoindoline-1,3-dione (28r)

¹H NMR (300 MHz, DMSO) δ 7.87–7.81 (m, 4H); 7.65–7.57 (m, 2H); 7.39–7.43 (m, 1H); 7.25–7.21 (m, 1H); 7.11 (s, 1H) 5.31 (s, 2H).

LC–MS calcd for C₁₇H₁₁NO₄ ([M + H]⁺) 294.06; found 294.27.

2-(Benzo[b]thiophen-2-ylmethoxy)isoindoline-1,3-dione (28s)

¹H NMR (300 MHz, CDCl₃) δ 7.85–7.74 (m, 6H); 7.45 (S, 1H); 7.38–7.35 (m, 2H); 5.51 (s, 2H).

LC–MS calcd for C₁₇H₁₁NO₃S ([M + H]⁺) 310.04; found 310.33.

2-(Thiophen-2-ylmethoxy)isoindoline-1,3-dione (28t)

¹H NMR (400 MHz, CDCl₃) δ 7.85–7.75 (m, 4H); 7.43 (d, J = 4, 1H); 7.22 (d, J = 4, 1H); 7.02 (t, J = 4, 1H); 5.40 (s, 2H).

LC–MS calcd for C₁₃H₉NO₃S ([M + H]⁺) 260.03; found 260.28.

2-((4-Methoxy-3,5-dimethylpyridin-2-yl)methoxy)isoindoline-1,3-dione (28u)

¹H NMR (300 MHz, CDCl₃) δ 8.15 (s, 1H); 7.89–7.83 (m, 4H); 5.35 (s, 2H); 3.83 (s, 3H); 2.57 (s, 3H); 2.27 (s, 3H).

LC–MS calcd for C₁₇H₁₆N₂O₄ ([M + H]⁺) 313.11; found 313.32.

General Procedure for the Synthesis of Compounds 9a–g, 13h–i, 21j–l, 25m–p, and 29q–u

The appropriate intermediate (1 equiv) (8a–g, 12h–i, 20j–l, 24m–p, 28q–u) was dissolved in DCM (1 m/mmol), and then hydrazine (2 equiv) was added at room temperature. The reaction mixture was stirred at room temperature for 2 h. Afterward, a TLC with the proper eluent showed complete consumption of the starting material. The reaction mixture was filtered, and the solution containing the product was dried under a vacuum. The desired products (9a–g) were obtained as colorless oil with 92–97% yields. Compounds 13h–i, 21j-l, 25m–p, and 29q–u were purified by flash column chromatography with the proper eluent. The desired products were obtained as colorless oils with 83–97% yields.

O-(3-Bromobenzyl)hydroxylamine (9a)

¹H NMR (300 MHz, CDCl₃) δ 7.64–7.60 (m, 2H); 7.46–7.37 (m, 2H); 5.66 (s, 2H); 4.59 (s, 2H).

LC–MS calcd for C₇H₈BrNO ([M + H]⁺) 202.97; found 202.04.

O-(4-Fluorobenzyl)hydroxylamine (9b)

¹H NMR (300 MHz, DMSO) δ 7.34–7.17 (m, 4H); 5.21 (s, 2H) 5.87 (s, 2H) 4.45 (s, 2H).

LC–MS calcd for C₇H₈FNO ([M + H]⁺) 142.05; found 142.14.

O-(4-Chlorobenzyl)hydroxylamine (9c)

¹H NMR (300 MHz, CDCl₃) δ 7.51–7.38 (m, 4H); 5.87 (s, 2H) 4.34 (s, 2H).

LC–MS calcd for C₇H₈ClNO ([M + H]⁺) 158.02; found 158.59.

O-(2,4-Difluorobenzyl)hydroxylamine (9d)

¹H NMR (300 MHz, CDCl₃) δ 7.60–7.52 (3H); 5.66 (s, 2H); 4.51 (s, 2H).

LC–MS calcd for C₇H₇F₂NO ([M + H]⁺) 160.04; found 160.13.

O-(4-Methylbenzyl)hydroxylamine (9e)

¹H NMR (300 MHz, CDCl₃) δ 7.21–7.13 (m, 4H); 5.99 (s, 2H);4.51 (s, 2H); 2.29 (s, 3H).

LC–MS calcd for C₈H₁₁NO ([M + H]⁺) 138.08; found 138.17.

O-([1,1′-Biphenyl]-4-ylmethyl)hydroxylamine (9f)

¹H NMR (300 MHz, CDCl₃) δ 7.64–7.61 (m, 4H); 7.49–7.44 (m, 4H); 7.40–7.35 (m, 1H); 5.46 (s, 2H); 4.76 (s, 2H).

O-(Naphthalen-2-ylmethyl)hydroxylamine (9g)

¹H NMR (300 MHz, CDCl₃) δ 7.97–7.47 (m, 7H); 5.01 (s, 2H); 4.68 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 133.52; 133.10; 131.69; 129.03; 128.78; 128.51; 128.11; 127.23; 127.09; 126.99; 76.25.

HRMS (ESI) calculated for C₁₁H₁₁NO ([M + H]⁺) 174.08414; found 174.08431.

O-Phenethylhydroxylamine (13h)

¹H NMR (300 MHz, CDCl₃) δ 7.43–7.22 (m, 5H); 5.45 (s, 2H); 3.92 (t, J = 8, 2H); 2.93 (t, J = 8, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 151.42; 138.24; 129.24; 119.61; 115.75; 115.58; 55.05; 48.91.

HRMS (ESI) calculated for C₈H₁₁NO ([M + H]⁺) 138.07613; found 138.076504.

O-(4-Methoxyphenethyl)hydroxylamine (13i)

¹H NMR (300 MHz, CDCl₃) δ 7.14 (d, J = 8, 2H); 6.84 (d, J = 8, 2H); 4.14 (t, J = 8, 2H); 3.77 (s, 3H); 2.86 (t, J = 8, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 151.42; 138.24; 129.24; 119.61; 115.75; 115.58; 55.05; 48.91; 46.11.

HRMS (ESI) calculated for C₉H₁₃NO₂ ([M + H]⁺) 168.09464; found 168.094503.

O-(3-Morpholinobenzyl)hydroxylamine (20j)

¹H NMR (400 MHz, CDCl₃) δ: 7.20 (t, J = 8, 1H); 6.86–6.79 (m, 3H); 5.12 (s, 2H); 4.59 (s, 2H); 3.78 (t, J = 4, 4H); 3.09 (t, J = 4, 4H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 151.50; 138.41; 129.33; 119.99; 115.42; 115.32; 78.28; 66.92; 49.36; 49.28; 21.97; 21.93.

HRMS (ESI) calculated for C₁₁H₁₆N₂O₂ ([M + H]⁺) 209.12123; found 209.121569.

O-(3-(Pyrrolidin-1-yl)benzyl)hydroxylamine (20k)

¹H NMR (300 MHz, CDCl₃) δ 7.24 (t, J = 9, 1H); 6.68 (d, J = 4, 1H); 6.59–6.54 (m, 2H); 5.09 (s, 2H); 4.69 (s, 2H); 3.34–3.30 (m, 4H); 2.05–2.00 (m, 4H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 148.20; 138.16; 129.32; 115.43; 111.46; 111.43; 78.70; 47.68; 25.52.

HRMS (ESI) calculated for C₁₁H₁₆N₂O ([M + H]⁺) 193.12634; found 193.126775.

O-(3-(4-Methylpiperazin-1-yl)benzyl)hydroxylamine (20l)

¹H NMR (300 MHz, CDCl₃) δ 7.18 (t, J = 6, 1H); 6.37 (s, 1H); 6.78 (t, J = 6, 2H); 4.95 (s, 2H); 4.57 (s, 2H); 3.15 (t, J = 6, 4H); 2.49 (t, J = 6, 4H); 2.27 (s, 3H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 151.42; 138.24; 129.24; 119.61; 115.75; 115.58; 27.31.

HRMS (ESI) calculated for C₁₂H₁₉N₃O ([M + H]⁺) 222.15284; found 222.15288.

O-([1,1′-Biphenyl]-3-ylmethyl)hydroxylamine (25m)

¹H NMR (300 MHz, CDCl₃) δ 7.73–7.67 (m, 4H); 7.56–7.37 (m, 5H); 5.06 (s, 2H); 4.67 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 140.99; 140.11; 134.96; 129.79; 129.48; 128.68; 128.19; 128.02; 127.85; 127.22; 76.20.

HRMS (ESI) calculated for C₁₃H₁₃NO ([M + H]⁺) 200.09971; found 200.09986.

5-(3-((Aminooxy)methyl)phenyl)pyrimidin-2-amine (25n)

¹H NMR (300 MHz, CDCl₃) δ 8.73–8.69 (m, 2H); 8.07–8.04 (m, 1H); 7.66–7.61 (m, 1H); 5.11 (s, 2H); 4.67 (s, 2 h).

¹³C NMR (100.6 MHz, CDCl₃) δ: 147.64; 140.90; 131.90; 124.49; 73.07.

HRMS (ESI) calculated for C₁₁H₁₂N₄O ([M + H]⁺) 217.10114; found 217.10192.

O-((4′-(Trifluoromethyl)-[1,1′-biphenyl]-3-yl)methyl)hydroxylamine (25o)

¹H NMR (300 MHz, CDCl₃) δ 7.94–7.78 (m, 6H); 7.61–7.48 (m, 2H); 5.10 (s, 2H); 4.56 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 144.11; 139.38; 135.29; 130.00; 129.65; 128.30; 128.19; 128.05; 126.34; 76.05.

HRMS (ESI) calculated for C₁₄H₁₂F₃NO ([M + H]⁺) 268.08714; found 268.08786.

O-((4′-Fluoro-[1,1′-biphenyl]-3-yl)methyl)hydroxylamine (25p)

¹H NMR (300 MHz, CDCl₃) δ 8.08 (s, 1H); 8.07–7.82 (m, 2H); 7.66–7.58 (m, 5H); 7.22–7.16 (m, 2H); 4.91 (s, 2H); 4.62 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 164.92; 139.94; 136.58; 134.99; 129.82; 129.28; 129.20; 128.65; 127.96; 127.80; 116.40; 116.18; 87.15; 76.16.

HRMS (ESI) calculated for C₁₃H₁₂FNO ([M + H]⁺) 218.09034; found 218.09089.

O-(Pyridin-3-ylmethyl)hydroxylamine (29q)

¹H NMR (300 MHz, CDCl₃) δ 8.73–8.69 (m, 2H); 8.07–8.04 (m, 1H); 7.66–7.61 (m, 1H); 5.11 (s, 2H); 4.71 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 147.64; 140.90; 131.90; 125.49; 73.07.

HRMS (ESI) calculated for C₆H₈N₂O ([M + H]⁺) 125.06371; found 125.06305.

O-(Benzofuran-2-ylmethyl)hydroxylamine (29r)

¹H NMR (300 MHz, CDCl₃) δ 7.59 (d, J = 3; 1H); 7.51 (d, J = 3; 1H); 7.34–7.22 (m, 2H); 6.77 (s, 1H); 5.60 (s, 2H); 4.81 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 155.35; 150.50; 127.92; 125.89; 123.63; 122.30; 111.86; 109.90; 68.24.

HRMS (ESI) calculated for C₉H₉NO₂ ([M + H]⁺) 164.06333; found 164.06333.

O-(Benzo[b]thiophen-2-ylmethyl)hydroxylamine (29s)

¹H NMR (400 MHz, DMSO) δ 7.94 (d, J = 4, 1H); 7.81 (d, J = 4, 2H); 7.38–7.31 (m, 3H); 6.24 (s, 2H); 4.82 (s, 2H); 4.76.

¹³C NMR (100.6 MHz, CDCl₃) δ: 142.62; 139.98; 139.58; 124.76; 124.73; 123.99; 123.28; 122.88; 72.40.

HRMS (ESI) calculated for C₉H₉NOS ([M + H]⁺) 180.04053; found 180.04086.

O-(Thiophen-2-ylmethyl)hydroxylamine (29t)

¹H NMR (400 MHz, DMSO) δ 7.69 (d, J = 4, 1H); 7.28 (s, 1H); 7.09 (t, J = 4, 1H); 5.99 (s, 2H); 5.24 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 135.46; 130.61; 129.35; 127.71; 70.06.

HRMS (ESI) calculated for C₅H₇NOS ([M + H]⁺) 130.02481; found 130.02486.

O-((4-Methoxy-3,5-dimethylpyridin-2-yl)methyl)hydroxylamine (29u)

¹H NMR (300 MHz, CDCl₃) δ 8.26 (s, 1H); 5.63 (s, 2H); 4.85 (s, 2H); 3.78 (s, 3H); 2.29 (s, 3H); 2.27 (s, 3H) .

¹³C NMR (100.6 MHz, CDCl₃) δ: 163.08; 153.95; 148.16; 124.79; 124.35; 58.86; 12.28.

HRMS (ESI) calculated for C₉H₁₄N₂O₂ ([M + H]⁺) 183.10557; found 183.10586.

General Procedure for the Synthesis of Compounds 10a–g

The appropriate intermediate 9a–g (1 equiv) was dissolved in ethyl ether (1 mL/mmol), and then a hydrochloric solution 4 N in dioxane (0.5 mL/mmol) was gradually added. The reaction mixture was stirred at room temperature for 30 min. Afterward, the precipitate was filtered, and the product was obtained as white powder salt with 92–98% yields.

O-(3-Bromobenzyl)hydroxylammonium Chloride (10a)

¹H NMR (300 MHz, DMSO) δ 11.12 (s, 3H); 7.64–7.60 (m, 2H); 7.46–7.37 (m, 2H); 5.05 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 136.94; 132.35; 132.22; 131.31; 128.63; 122.17; 75.07.

HRMS (ESI) calculated for C₇H₉BrClNO ([M + H]⁺) 203.21783; found 203.21786.

O-(4-Fluorobenzyl)hydroxylammonium Chloride (10b)

¹H NMR (300 MHz, CDCl₃) δ 11.04 (s, 3H); 7.51–7.46 (m, 2H); 7.29–7.23 (m, 2H); 5.03 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 164.18; 161.74: 132.22; 132.14; 130.59; 130.56; 116.10; 115.88; 75.29.

HRMS (ESI) calculated for C₇H₉ClFNO ([M + H]⁺) 142.03571; found 142.03586.

O-(4-Chlorobenzyl)hydroxylammonium Chloride (10c)

¹H NMR (400 MHz, DMSO) δ 11.23 (s, 3H); 7.51–7.38 (m, 4H); 4.76 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 134.23; 133.22; 131.61; 129.13; 75.15.

HRMS (ESI) calculated for C₇H₉Cl₂NO ([M + H]⁺) 158.00613; found 158.00686.

O-(2,4-Difluorobenzyl)hydroxylammonium Chloride (10d)

¹H NMR (400 MHz, DMSO) δ 11.18 (s, 3H); 7.62–7.56 (m, 1H); 7.37–7.31 (m, 1H); 7.19–7.14 (m, 1H); 5.10 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 162.92; 160.43; 134.25; 134.20; 134.15; 134.09; 117.93; 117.78; 112.48; 112.45; 112.27; 112.24; 105.02; 104.76; 104.51; 69.44; 69.41.

HRMS (ESI) calculated for C₇H₈ClF₂NO ([M + H]⁺) 160.02624; found 160.02686.

O-(4-Methylbenzyl)hydroxylammonium Chloride (10e)

¹H NMR (400 MHz, DMSO) δ 11.11 (s, 3H); 7.44–7.20 (m, 4H); 5.03 (s, 2H); 2.37 (s, 3H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 139.10; 131.11; 129.86; 129.66; 76.13; 21.32.

HRMS (ESI) calculated for C₈H₁₂ClNO ([M + H]⁺) 138.06073; found 138.06086.

O-([1,1′-Biphenyl]-4-ylmethyl)hydroxylammonium Chloride (10f)

¹H NMR (400 MHz, DMSO) δ 11.13 (s, 3H); 7.52–7.49 (m, 5H); 7.42–7.38 (m, 4H); 4.79 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 140.91; 139.70; 135.47; 129.23; 128.12; 127.92; 127.64; 79.03.

HRMS (ESI) calculated for C₁₃H₁₄ClNO ([M + H]⁺) 235.0764; found 200.2286.

O-(Naphthalen-2-ylmethyl)hydroxylammonium Chloride (10g)

¹H NMR (400 MHz, DMSO) δ 11.23 (s, 3H); 7.97–7.47 (m, 8H); 5.01 (s, 2H).

¹³C NMR (100.6 MHz, CDCl₃) δ: 133.52; 133.10; 131.69; 129.03; 128.78; 128.51; 128.11; 127.23; 127.09; 126.99; 76.25.

HRMS (ESI) calculated for C₁₁H₁₂ClNO ([M + H]⁺) 174.67301; found 174.67311.

Materials

PLP, pyridoxine, l-alanine, sodium glyoxylate, rabbit muscle l-lactic dehydrogenase (LDH), β-nicotinamide adenine dinucleotide reduced form (NADH), isopropyl-β-d-thiogalactoside (IPTG), and imidazole were all purchased from Sigma. Ham’s F12 Glutamax medium and Zeocin were purchased from Invitrogen. Geneticin was purchased from Gibco. Protease Inhibitor Cocktail EDTA-free and Protease Inhibitor Cocktail Complete Mini were purchased from Roche. The clones of Chinese hamster ovary cells stably expressing glycolate oxidase (CHO-GO) and AGTwt (CHO-GO-AGTwt), or the variants (CHO-GO-G41R, CHO-GO-AGTMi, CHO-GO-F152IMi, CHO-GO-G170RMi, CHO-GO-I244TMi), and the rabbit polyclonal anti-AGT human antibody were kindly provided by Prof. C.J. Danpure (University College London). Compounds 1, 2, 3, 4, and 5 were purchased from Sigma-Aldrich. All other chemicals were of the highest purity available.

Methods

Docking Studies

Molecular docking has been performed using the MOE Dock Tool available on MOE 2018.0101(Chemical Computing Group ULC, Montreal, QC, Canada) as previously reported.⁵³ Briefly, the crystal structure of human AGT (PDB ID:1H0C)¹ and the ligand (compound 1) have been prepared and protonated using the Protonated 3D Tool and the docking site selected by using the MOE Site Finder Tool. Then, a collection of ligand conformations using the bond rotation method has been generated, placed in the selected site by the Triangle Matcher method, and ranked using the London dG scoring function, which estimates the free energy of binding of the ligand from a given pose. Finally, the Refinement tool has been used for energy minimization of the pocket before rescoring the poses with Affinity dG, which estimates the enthalpic contribution to the free energy of binding. The top 10 poses for each ligand generated by the MOE Dock Tool were analyzed by visual inspection.

pK_a Measurement

The pK_a of compound 10b was performed spectrophotometrically by using a Sirius T3 instrument (Pion Inc., Forest Row, UK).^54,55 After calibration of the glass-electrode in ionic strength adjusted water (0.15 M for KCl addition),⁵⁶ 15 μL of a 10 mM solution of the compound in DMSO was spiked into 1.5 mL of ionic strength adjusted water. The sample solution was alkalimetrically titrated in the pH range from 2.0 to 9.0 at 25 ± 0.5 °C. Before titration, (i) a dark spectrum (i.e., a spectrum collected when lamp was off), accounting for detector noise, and (ii) a reference spectrum in the solution matrix (i.e., water with 1% DMSO) were recorded. Those were taken into account to return absorbance of the sample at each wavelength. The initial estimates of pK_a values were iteratively refined by means of the Target Factor Analysis⁵⁷ procedure, implemented in the SiriusT3Refine v. 1.1.3.0 software (Pion Inc., Forest Row, UK), to return the pK_a of 10b. Reported is the mean value of three replicates with standard deviation.

Protein Expression and Purification

AGTwt and pathogenic variants in their His-tagged form were expressed in Escherichia coli BL21 strain and purified by the procedure already described.⁵⁸ Briefly, after the expression of the protein upon induction with 0.1 mM IPTG for 15 h at 30 °C, cells were lysed and the suspensions were centrifuged at 30,000g for 30 min at 4 °C. The sample was loaded on a HisPrep FF 16/10 column (GE Healthcare), and the eluted fractions, after addition of 100 μM PLP, were concentrated using Vivaspin Turbo 15 concentrators (Sartorius). Protein concentration was determined by absorbance spectroscopy using an extinction coefficient of 9.54 × 10⁴ M^–1 cm^–1 at 280 nm. The PLP content was determined by releasing the coenzyme in 0.1 M NaOH and using ε = 6600 M^–1 cm^–1at 388 nm.³

Activity Assays

The transaminase activity of purified enzymes and cellular lysates was assayed as previously described.^3,34 Briefly, 100 μg of the cell lysate was incubated with 0.5 M l-alanine and 10 mM glyoxylate at 25 °C for 10–60 min in 0.1 M potassium phosphate buffer (KP), pH 7.4, in the presence of 100 μM PLP. The reactions were stopped by adding TCA 10% (v/v), and pyruvate production was measured using a spectrophotometric assay coupled with lactate dehydrogenase.

Inhibition Studies

IC₅₀ values were determined by incubating AGTwt and the G41R variant in the presence of increasing concentrations of each inhibitor (range 100 nM–1 mM) followed by the measurement of residual transaminase activity. Each mixture contained 0.1 or 0.2 μM purified recombinant enzyme, 30 μM PLP, inhibitor, and 10 mM glyoxylate in 0.1 M KP, pH 7.4. The reaction, started by adding 37 mM or 50 mM l-alanine to AGTwt and the G41R variant, respectively, was stopped by adding 10% TCA (v/v) followed by the measurement of pyruvate formation using the assay coupled with LDH.

The slow-binding inhibition kinetics of AGT ligands was evaluated using the progression curve method.⁵⁹ AGTwt (0.05 μM) or the G41R variant (0.1 μM) was added to a reaction mixture (200 mM l-alanine, 10 mM glyoxylate, and 100 μM PLP in KP 0.1 M, pH 7.4), containing each inhibitor (nM−μM), and incubated at 25 °C. At different time points, aliquots were collected, the reaction was stopped by TCA 10% (v/v), and pyruvate produced was measured. Data for each progression curve were fitted to the integrated rate equation for slow binding inhibitors:

1

where v₀ represents the initial rate, v_s the steady-state rate, and k_obs the apparent first-order rate constant characterizing the formation of the steady-state enzyme–inhibitor complex. The obtained k_obs values were further analyzed for a one-step association mechanism:

2

where k_off and k_on are the dissociation and association rate constants, respectively. Intercept and slope values, obtained by linear regression of the k_obs versus inhibitor concentration plot (eq 2), yielded the association and dissociation rate constants k_on and k_off, respectively, and the inhibition constant (eq 3)

3

k_on^app was determined from the slope of the plot and then corrected for substrate competition using the following equation:

4

The K_I^true value was obtained from the following equation:

5

For some inhibitors (compounds 10g, 10b, 25m, and 20k on wild-type AGT, and compounds 10g and 10b on the G41R variant), it was not possible to define experimental conditions suitable to monitor the binding equilibrium to the enzyme. In the latter cases, the kinetic parameters of the inhibition were determined by using the relationship

6

Cell Culture, Treatment, and Lysis

Clones of CHO-GO cells were cultured in Ham’s F12 Glutamax medium supplemented with fetal bovine serum (10%, v/v), penicillin (100 U/mL), and streptomycin (100 mg/mL) at 37 °C in a 5% CO₂ humidified environment. The expression of AGT and GO was maintained by adding G-418 (0.8 mg/mL) and Zeocin (0.4 mg/mL), respectively, to the culture medium. To test the effects of each compound, cells were seeded in Petri dishes at the density of 9000/cm² and cultured for 7 days with 50 μM of each inhibitor in the presence or in the absence of 10 μM PN. At the end of treatment, cells were harvested and lysed by freeze/thawing (five cycles) in phosphate buffer saline (PBS) pH 7.2 supplemented with 100 μM PLP and the protease inhibitor cocktail (Complete Mini, Roche). The whole-cell extract was separated by centrifugation (13,200g, 10 min, 4 °C) to obtain the soluble fraction. Protein concentration in the soluble fraction was measured in quadruplicate using the Bradford protein assay.

Western Blot Analyses

Three micrograms of the soluble cell lysate was loaded on 10% SDS–PAGE and transferred on a nitrocellulose membrane. To rule out any gross difference of gel loading, we visually inspected the Ponceau staining. We immunoblotted the membrane with anti-AGT antibody (1:10.000) in 2.5% (w/v) milk in TTBS (50 mM Tris–HCl, pH 7.5, 150 mM NaCl, 0.1% Tween 20) overnight at 4 °C. After three washes in TTBS, the membrane was incubated with peroxidase-conjugated antirabbit immunoglobulin G (IgG) (1:10,000) in 5% milk in TTBS for 1 h at room temperature. We used the anti-GAPDH (1:1000) antibody as loading control. Immunocomplexes were visualized by an enhanced chemiluminescence kit (ECL, Pierce Biotechnology, Rockford, IL).

Cytotoxicity Assay

CHO-GO-AGTwt and CHO-GO-AGT-G41RMa cells were seeded in 96-well plates at a density of 9000/cm² in the presence or in the absence of the tested compounds. After 7 days, the cytotoxic effect of each inhibitor was evaluated using crystal violet staining as previously reported.⁶⁰

Glossary

Abbreviations Used

AGT

alanine–glyoxylate aminotransferase

AOA

aminooxyacetic acid

CHO

Chinese hamster ovary

GO

glycolate oxidase

PLP

pyridoxal 5′-phosphate

PN

pyridoxine.

Supporting Information Available

The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acs.jmedchem.2c00142.

• Spectral changes of AGT wt and the G41R variant in the presence of compound 1 and analogues (Figure S1); effect of compound 1 and analogues on AGTwt and the G41R variant expressed in mammalian cells in the presence of PN (Figure S2); binding studies of synthetized compounds on AGT and G41R variant in the purified form (Figure S3); effects of synthetic compound treatment on AGTwt and the G41R variant expressed in mammalian cells in the presence of PN (Figure S4); cytotoxic effect of selected hit compounds (Figure S5); ranking of five best synthetized compounds (Table S1); and LC–MS analytical method for assessing purity of key target compounds (Annex) (PDF)

• Molecular formula strings (CSV)

• Compound 1 + AGT (PDB)

Author Contributions

^§ S.G., G.A., and G.P. contributed equally to this work.

The authors declare no competing financial interest.