Skip to main content
Sensors (Basel, Switzerland) logoLink to Sensors (Basel, Switzerland)
. 2022 Sep 8;22(18):6808. doi: 10.3390/s22186808

Correction: Schiboni et al. DynDSE: Automated Multi-Objective Design Space Exploration for Context-Adaptive Wearable IoT Edge Devices. Sensors 2020, 20, 6104

Giovanni Schiboni 1,*, Juan Carlos Suarez 1, Rui Zhang 1, Oliver Amft 1
PMCID: PMC9504011  PMID: 36146449

Due to formal academic regulations, the affiliation of the university has been amended, and an “Acknowledgements” section has been added to the original publication [1].

Instead of “FAU Erlangen-Nürnberg”, it should be written as “Friedrich-Alexander-Universität Erlangen-Nürnberg (FAU)”.

The “Acknowledgements” section has been added at the bottom of the paper, just before the “Conflict of Interest”. The content now reads as follows:

Acknowledgements: The present study was performed in (partial) fulfillment of the requirements for obtaining the degree “Dr. rer. biol. Hum”.

This correction was approved by the Academic Editor. The original publication has also been updated.

Footnotes

Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Reference

  • 1.Schiboni G., Suarez J.C., Zhang R., Amft O. DynDSE: Automated Multi-Objective Design Space Exploration for Context-Adaptive Wearable IoT Edge Devices. Sensors. 2020;20:6104. doi: 10.3390/s20216104. [DOI] [PMC free article] [PubMed] [Google Scholar]

Articles from Sensors (Basel, Switzerland) are provided here courtesy of Multidisciplinary Digital Publishing Institute (MDPI)

RESOURCES