Skip to main content
PMC home page
Chemical Science logoLink to Chemical Science
. 2022 Nov 14;13(45):13611–13616. doi: 10.1039/d2sc05442f

Decarboxylative sulfoximination of benzoic acids enabled by photoinduced ligand-to-copper charge transfer†

Peng Xu 1, Wanqi Su 1,2, Tobias Ritter 1,✉
PMCID: PMC9682917  PMID: 36507153

Abstract

Sulfoximines are synthetically important scaffolds and serve important roles in drug discovery. Currently, there is no solution to decarboxylative sulfoximination of benzoic acids; although thoroughly investigated, limited substrate scope and harsh reaction conditions still hold back traditional thermal aromatic decarboxylative functionalization. Herein, we realize the first decarboxylative sulfoximination of benzoic acids via photo-induced ligand to copper charge transfer (copper-LMCT)-enabled decarboxylative carbometalation. The transformation proceeds under mild reaction conditions, has a broad substrate scope, and can be applied to late-stage functionalization of complex small molecules.

We report the first decarboxylative sulfoximination of benzoic acids via photoinduced ligand-to-copper charge transfer. The transformation proceeds at ambient reaction temperature and demonstrates broad substrate scope.graphic file with name d2sc05442f-ga.jpg

Introduction

Coordination of substrates including alcohols,1 halides,2 azides,3 and alkyl carboxylates4 to abundant 3d metal salts like Fe, Ni, or Cu can form photoactive metal complexes. Promoted to their excited states upon irradiation can result in intramolecular ligand-to-metal charge transfer (LMCT) within the excited state complexes to generate reactive open-shell radical intermediates with reactivity hardly reachable in the ground state.1–5 Conventional metal-catalysed or -mediated thermal decarboxylative cross-coupling reactions normally require high reaction temperature and ortho-substituents.6 Radical aromatic decarboxylation proceeds about three orders of magnitude slower than from aliphatic carboxyl radicals,7,8 which generally leads to undesirable side reactions such as hydrogen atom abstraction for benzoyl radicals.7 As a consequence, many aromatic decarboxylative bond forming reactions, including sulfoximination, are still out of reach for conventional reaction chemistry. Here we report the first decarboxylative sulfoximination of benzoic acids enabled by photo-induced ligand to copper charge transfer. Photoactive copper(ii) carboxylates undergo a low-barrier radical CO2 extrusion upon irradiation, with the putative formed aryl radicals subsequently captured by copper complexes to generate CuAr(iii) species for C–N reductive elimination. The synthetic utility of this method was exemplified by late-stage decarboxylative sulfoximination of several complex small-molecule benzoic acids, which are abundantly available from nature.

Photonic excitation of copper(ii) complexes have been known as an effective platform for generating reactive radicals for decades. Kochi first studied the addition and Csp3–H abstraction reactivity of chlorine radical generated by the photo-irradiation of CuCl2 in different organic solvents.2a Based on this initial finding, Wan and co-workers developed a vicinal dichlorination of alkenes catalyzed by CuCl2 under air,2b and the Rovis group realized a copper catalyzed olefination of unactivated Csp3–H bonds.2c In addition to chlorine radicals, copper-LMCT is also suitable for N- or C-centered radical generation. In 2018, Rehbein and Reiser found that copper-LMCT was effective for azide radical generation,3 and Wang and Xu suggested the formation of N-centered radical cations via intramolecular LMCT of quinolinyl-8-glycinate ester coordinated alkyl-Cu(iii) adducts.9 For C-centered radicals, Gong and co-workers proposed the generation of alkyl radical intermediates via photolysis of Cu(ii)-alkyl complexes.10 Although copper-LMCT in copper(ii) carboxylate complexes was first described by DeGraff and co-workers during their research on the photolysis of copper(ii)-malonate,4a,b it was not until 2021 that our group applied this copper-LMCT reactivity to synthetic applications.11 We realized the first aromatic decarboxylative fluorination11a and the decarboxylative hydroxylation11b of benzoic acids. Concurrently, the MacMillan group explored the copper-LMCT reactivity in aromatic decarboxylative borylation12a and halogenation,12b and achieved copper catalysis for transformations with single electron oxidants such as 1-fluoro-2,4,6-trimethylpyridinium tetrafluoroborate (NFTPT). Stoichiometric copper is still required for nucleophiles such as fluoride.11a Nearly at the same time, the Yoon group developed a copper-mediated oxidative decarboxylative functionalization of aliphatic carboxylic acids.4e Most recently, Reiser and co-workers reported a copper-catalysed aliphatic decarboxylative oxygenation methodology, where oxygen was applied as the oxidant.4i While we and others have developed the concept of photo-induced copper-LMCT-enabled aromatic radical decarboxylation to achieve previously unknown reactivity, the coupling counterparts are generally limited to halides, carboxylates or boronate esters but strong coordinating NH-nucleophiles have not been shown to react (Fig. 1A).11,12 Given that copper-LMCT relies on the coordination of carboxylates to copper(ii) species, strong coordination of NH-nucleophiles such as NH-sulfoximines will compete with carboxylates and form undesired copper species that can diminish the reaction efficiency. Though thermal aromatic decarboxylative C–N cross couplings under high reaction temperatures (normally more than 140 °C) have been explored by Jia, Gooβen, and Xie, electron-deficient ortho-substituted benzoic acids are required for efficient CO2 extrusion (Fig. 1A).13 Thus, a general aromatic decarboxylative C–N cross coupling still remains elusive.

Fig. 1. (A) Prior art of copper-LMCT enabled decarboxylation of benzoic acids and thermal aromatic decarboxylative C–N cross couplings. (B) Previous synthesis of N-arylated sulfoximines via N-arylation of NH-sulfoximines. (C) Aromatic decarboxylative sulfoximination via copper-LMCT.

Fig. 1

Open in a new tab

The study of sulfoximines dates back as far as 1949 when methionine sulfoximine was first synthesized by Bentley and Whitehead.14 Today, sulfoximines play a remarkable role in synthetic chemistry15 and drug discovery;16 they have been applied as chiral auxiliaries,17 chiral ligands,18 asymmetric organocatalysts19 and building blocks.15,20N-arylated sulfoximines are mainly prepared by transition-metal-catalyzed direct N-arylation of NH-sulfoximines with aryl (pseudo)halides,21 arylboronic acids,22 aryl siloxanes,23 acyl peroxides,24 arylsulfinates,25 and aryl hydrazides26 but cannot be accessed from benzoic acids (Fig. 1B). Herein, we present the first decarboxylative sulfoximination of benzoic acids by applying a photo-induced carboxylate-to-copper charge transfer strategy (Fig. 1C). We found that lithium carboxylates with 2,6-di-tert-butylpyridine (DTBP) and LiOMe as additives was able to overcome the challenging low reaction efficiency associated with copper-LMCT-enabled aromatic decarboxylative sulfoximination.

Results and discussion

Because of the enhanced N–H acidity, NH-sulfoximines can undergo facile deprotonation and readily coordinate with copper(ii) species.16c In the copper-LMCT process, competing coordination of sulfoximines to copper(ii) might hinder the formation of key copper(ii) carboxylate intermediates and, in turn, decrease the reaction efficiency. We hypothesized that initial deprotonation of the benzoic acids to their carboxylate salts might facilitate the generation of photoactive copper(ii) carboxylates, while the careful screening of additives can hinder the formation of undesired sulfoximine-ligated copper(ii) species.

As shown in Table 1, we verified our assumption via the decarboxylative sulfoximination of lithium 4-fluorobenzoate (1). A series of reaction condition optimization (see ESI for more details†) reveals that purple light irradiation of a mixture of 1, NH-sulfoximine 2, Cu(OTf)2, LiOMe and 2,6-di-tert-butylpyridine (DTBP) in MeCN can afford N-arylated sulfoximine 3 in 66% yield, together with side product ester 3a in 8% yield (Table 1, entry 1). Compared with 4-fluorobenzoic acid, 4-fluorobenzoate salts underwent more efficient decarboxylation, and the lithium salts gave the best yield (entries 1–3). The result is consistent with our hypothesis that the use of benzoate salts can promote the formation of copper carboxylates and increase the reaction efficiency. Notably, the combination of bulky DTBP and LiOMe is crucial to obtain a high yield. Replacing DTBP/LiOMe with other inorganic or organic bases generally led to lower yields, and a large amount of side oxydecarboxylation product 3a was detected (entries 4–6). Strong coordinating bi- or tridentate pyridine-based ligands or bidentate PyBOX ligand were also tested, yet no better yields were observed (see ESI for more details†). We assume that weak ligation of bulky DTBP to copper might favour C–N reductive elimination over C–O reductive elimination or help to form photoactive copper(ii) carboxylates species. The role of LiOMe is not very clear; we propose that the addition of LiOMe might help decrease the concentration of free sulfoximines by forming poorly soluble sulfoximine lithium salts and in turn, accelerate the formation of copper(ii) carboxylate species. Low conversion of starting substrates 1 and 2 was observed when copper sources including Cu(OAc)2 were used instead of Cu(OTf)2 (entry 7). Interestingly, only MeCN as solvent was productive, and DCM only afforded 12% protodecarboxylation side-product fluorobenzene (entry 8). Control experiments confirmed the essential use of 390 nm LEDs irradiation for CO2 extrusion, and no decarboxylation was observed under thermal reaction conditions.

Optimization of the reaction conditionsa.

graphic file with name d2sc05442f-u1.jpg
Entry Variation Yield of 3/3ab (%)
1 None 66/8
2 H+ instead of Li+ 44/8
3 Na+ instead of Li+ 60/12
4 Li2CO3 instead of LiOMe/DTBP 48/20
5 KF instead of LiOMe/DTBP 38/40
6 2,6-Difluoropyridine instead of LiOMe/DTBP 22/36
7 Cu(OAc)2 instead of Cu(OTf)2 0/0
8 DCM instead of MeCN 0/0c
9 No DTBP 0/0
10 No LiOMe 58/8
Open in a new tab
a

Reaction conditions: 1 (0.05 mmol, 1.0 equiv.), 2 (2.5 equiv.), Cu(OTf)2 (2.5 equiv.), LiOMe (1.0 equiv.), 2,6-di-tert-butylpyridine (DTBP, 2.0 equiv.), MeCN (c = 25 mM), 18 h purple LEDs irradiation, 35 °C.

b

Yields were determined by 19F NMR using 2-fluorotoluene (2.0 equiv.) as an internal standard.

c

12% yield of protodecarboxylation product fluorobenzene was observed.

Subsequently, we next studied the substrate scope of the decarboxylative sulfoximination (Fig. 2). Electron-deficient (4, 5, 9, 17), electron-neutral (3, 7, 10) and electron-rich (6, 11, 16) benzoic acids underwent smooth decarboxylative sulfoximination to afford their corresponding N-arylated sulfoximines in moderate to good yields. Owing to the high oxidative potential, radical decarboxylation of electron-deficient benzoic acids is generally problematic,27 however, performed well under our present reaction condition. Ortho-fluoro-substituted benzoic acid (10) gave a moderate yield; yet, benzoic acids with large ortho-substituents failed to afford productive yields, possibly owing to the insufficient generation of copper(ii) carboxylates. Heteroaromatic carboxylic acids such as CF3-substituted isonicotinic acid can also perform efficient decarboxylation to afford the corresponding N-arylated sulfoximine 12. Functional groups including aryl halides (7, 20), ketone (13), heterocycles (8, 12, 19), nitriles (9, 18) and sulfonamides (17, 19) were well tolerated. α-O or –N (11, 14, 17, 20), benzylic (15–17, 20), and tertiary (14) C–H bonds that are sensitive to HAT do not prevent efficient decarboxylative sulfoximination. In addition, strong coordinating or oxidizable functional groups like amines inhibit the transformation. The utility of this decarboxylative sulfoximination was further displayed by the late-stage decarboxylative sulfoximination of several complex small molecules (8, 14, 19, 20). NH-Sulfoximines with electron-rich (29, 30) and electron-neutral (21–24) arenes afforded good yields; however, electron-deficient NH-sulfoximines (25, 27) gave lower yields, possibly due to their weaker N-nucleophilicity. Dialkyl (31) and diaryl (32) NH-sulfoximines furnished their corresponding N-arylated sulfoximines in moderate yields. Benefiting from the mild reaction conditions, N-arylation of enantiopure NH-sulfoximines (21, 22) proceeded in good yields, and no racemization was observed. In most cases, low conversion of the starting benzoate salts accounts for the observed low yield.

Fig. 2. Substrate scope. Standard reaction condition: lithium benzoate (0.20 mmol, 1.0 equiv.), sulfoximine (2.5 equiv.), Cu(OTf)2 (2.5 equiv.), LiOMe (1.0 equiv.), DTBP (2.0 equiv.), MeCN (c = 25 mM), 18 h purple LEDs irradiation, 35 °C. aReaction was performed at 1.0 mmol scale. bReaction condition: lithium benzoate (0.20 mmol, 1.0 equiv.), sulfoximine (2.5 equiv.), Cu(MeCN)4BF4 (2.5 equiv.), 1-fluoro-2,4,6-trimethylpyridinium triflate (2.5 equiv.), DTBP (2.0 equiv.), MeCN (c = 25 mM), 18 h purple LEDs irradiation, 35 °C. DTBP = 2,6-di-tert-butylpyridine.

Fig. 2

Open in a new tab

Preliminary investigations to study the reaction mechanism are consistent with the mechanism shown in Fig. 3. In the UV-vis absorption spectrum of the mixture of lithium 4-fluorobenzoate (1) and Cu(OTf)2, a strong absorbance (370–470 nm) attributed to the LMCT band of copper(ii) carboxylates was detected (Fig. 3A).28 The LMCT band overlaps with the purple LED emission spectrum, consistent with the excitation of copper(ii) carboxylates under the reaction conditions. The coordination of sulfoximines to copper(ii) and the coordination of 2,6-di-tert-butylpyridine (DTBP) to copper(ii) are in agreement with the observation of an absorbance (370–470 nm) of a mixture of sulfoximine 2 and Cu(OTf)2, and a mixture of DTBP and Cu(OTf)2 (Fig. 3A). All copper(ii)-containing mixtures display a broad d–d transitions absorbance at 550−900 nm, which decreased monotonously upon purple LED irradiation, consistent with the reduction of Cu(ii) to Cu(i) (Fig. 3B). The formation of Cu(i) was confirmed by the observation of a characteristic purple [CuI(biq)2]+ complex when 2,2′-biquinoline (biq) was added to the irradiated reaction mixture (see ESI for more detail†).29 Additional experiments were then performed to explore the transformation of carboxylate ions upon irradiation. In radical trapping experiments, aryl carboxyl radical adduct phenyl 3-methoxybenzoate and aryl radical adduct 3-methoxy-1,1′-biphenyl were separated, which indicated the formation of aryl carboxyl and aryl radicals (see ESI for more details†). The presence of aryl carboxyl radical and aryl radical was further confirmed by 6-endo-trig intramolecular radical cyclisation (see ESI for more details†) and radical deuterodecarboxylation (Fig. 3C), respectively. N-Phenyl-sulfoximine, possibly formed by radical addition of sulfoximinyl radical to benzene, was also identified in the radical trapping experiments. We hypothesize that the sulfoximinyl radical is formed via a nitrogen to copper charge transfer in the copper(ii) sulfoximine complex, with consumption of the copper(ii) species. This result is consistent with competing coordination of sulfoximines to copper(ii) and may also explain the low reaction reactivity caused by the competing coordination. Based on the above mechanistic investigation, we propose a mechanism as depicted in Fig. 3D. Photo-induced carboxylate to copper(ii) charge transfer in copper(ii) carboxylates I affords aryl carboxyl radical intermediates II, which then undergo low-barrier radical decarboxylation to afford aryl radicals III. Subsequent copper-assisted aryl radical capture generates arylcopper(iii) intermediates IV that finally undergo C–N reductive elimination to afford N-arylated sulfoximines (Fig. 3D). Additionally, we found that other N-nucleophiles, such as ortho-sulphobenzamide, could also be coupled by the copper-LMCT approach (Fig. 3E).

Fig. 3. Mechanistic investigations and synthetic application. DTBP = 2,6-di-tert-butylpyridine. (A) UV-vis absorption spectra of reaction components. (B) UV-vis spectral changes observed upon photolysis of a mixture of 1 (1.0 mM), 2 (2.5 mM), Cu(OTf)2 (2.5 mM), LiOMe (1.0 mM), and DTBP (2.0 mM) in MeCN under purple LEDs irradiation (0–64 min). (C) Deuterodecarboxylation. (D) Proposed reaction mechanism. (E) Decarboxylative C–N cross-coupling with sodium saccharin as the N-nucleophile.

Fig. 3

Open in a new tab

Conclusions

Copper-LMCT based radical aromatic decarboxylative carbometalation enabled the first decarboxylative sulfoximination of benzoic acids. The broad substrate scope and good functional group tolerance demonstrate the generality of the copper-LMCT concept in aromatic decarboxylative sulfoximination. Conceptually, the success of this transformation demonstrates the expansion of the copper-LMCT concept for aromatic decarboxylative cross-couplings to reactions with strongly coordinating nucleophiles.

Data availability

Procedures and compound characterization are provided in the ESI.†

Author contributions

P. X. initiated the project and performed experiments and analyzed the data. W. S. performed and analyzed experiments regarding the mechanism. T. R. directed the project.

Conflicts of interest

The authors declare no competing interests.

Supplementary Material

SC-013-D2SC05442F-s001

Acknowledgments

We thank Dr Sun Xiang (MPI KOFO) for helpful discussions.

†

Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d2sc05442f

Notes and references

  1. (a) Guo J.-J. Hu A. Chen Y. Sun J. Tang H. Zuo Z. Angew. Chem., Int. Ed. 2016;55:15319–15322. doi: 10.1002/anie.201609035. [DOI] [PubMed] [Google Scholar]; (b) Hu A. Guo J.-J. Pan H. Zuo Z. Science. 2018;361:668–672. doi: 10.1126/science.aat9750. [DOI] [PubMed] [Google Scholar]; (c) Zhang K. Chang L. An Q. Wang X. Zuo Z. J. Am. Chem. Soc. 2019;141:10556–10564. doi: 10.1021/jacs.9b05932. [DOI] [PubMed] [Google Scholar]; (d) Liu W. Wu Q. Wang M. Huang Y. Hu P. Org. Lett. 2021;23:8413–8418. doi: 10.1021/acs.orglett.1c03137. [DOI] [PubMed] [Google Scholar]; (e) Chang L. An Q. Duan L. Feng K. Zuo Z. Chem. Rev. 2022;122:2429–2486. doi: 10.1021/acs.chemrev.1c00256. [DOI] [PubMed] [Google Scholar]; (f) Xue T. Zhang Z. Zeng R. Org. Lett. 2022;24:977–982. doi: 10.1021/acs.orglett.1c04365. [DOI] [PubMed] [Google Scholar]; (g) Wang K. Zeng R. Org. Chem. Front. 2022;9:3692–3696. doi: 10.1039/D2QO00709F. [DOI] [Google Scholar]
  2. (a) Kochi J. K. J. Am. Chem. Soc. 1962;84:2121–2127. doi: 10.1021/ja00870a025. [DOI] [Google Scholar]; (b) Lian P. Long W. Li J. Zheng Y. Wan X. Angew. Chem., Int. Ed. 2020;59:23603–23608. doi: 10.1002/anie.202010801. [DOI] [PubMed] [Google Scholar]; (c) Treacy S. M. Rovis T. J. Am. Chem. Soc. 2021;143:2729–2735. doi: 10.1021/jacs.1c00687. [DOI] [PMC free article] [PubMed] [Google Scholar]; (d) Shields B. J. Doyle A. G. J. Am. Chem. Soc. 2016;138:12719–12722. doi: 10.1021/jacs.6b08397. [DOI] [PMC free article] [PubMed] [Google Scholar]; (e) Kang Y. C. Treacy S. M. Rovis T. ACS Catal. 2021;11:7442–7449. doi: 10.1021/acscatal.1c02285. [DOI] [PMC free article] [PubMed] [Google Scholar]; (f) Yang Q. Wang Y.-H. Qiao Y. Gau M. Carroll P. J. Walsh P. J. Schelter E. J. Science. 2021;372:847–852. doi: 10.1126/science.abd8408. [DOI] [PubMed] [Google Scholar]; (g) Jin Y. Zhang Q. Wang L. Wang X. Meng C. Duan C. Green Chem. 2021;23:6984–6989. doi: 10.1039/D1GC01563J. [DOI] [Google Scholar]; (h) Zhang G. Zhang Z. Zeng R. Chin. J. Chem. 2021;39:3225–3230. doi: 10.1002/cjoc.202100420. [DOI] [Google Scholar]; (i) Wang C.-C. Zhang G.-X. Zuo Z.-W. Zeng R. Zhai D.-D. Liu F. Shi Z.-J. Sci. China: Chem. 2021;64:1487–1492. doi: 10.1007/s11426-021-1032-7. [DOI] [Google Scholar]; (j) Gonzalez M. I. Gygi D. Qin Y. Zhu Q. Johnson E. J. Chen Y.-S. Nocera D. G. J. Am. Chem. Soc. 2022;144:1464–1472. doi: 10.1021/jacs.1c13333. [DOI] [PubMed] [Google Scholar]; (k) Oh S. Stache E. E. J. Am. Chem. Soc. 2022;144:5745–5749. doi: 10.1021/jacs.2c01411. [DOI] [PubMed] [Google Scholar]; (l) Yamane M. Kanzaki Y. Mitsunuma H. Kanai M. Org. Lett. 2022;24:1486–1490. doi: 10.1021/acs.orglett.2c00138. [DOI] [PubMed] [Google Scholar]; (m) Xiong N. Dong Y. Xu B. Li Y. Zeng R. Org. Lett. 2022;24:4766–4771. doi: 10.1021/acs.orglett.2c01743. [DOI] [PubMed] [Google Scholar]; (n) Dai Z.-Y. Zhang S.-Q. Hong X. Wang P.-S. Gong L.-Z. Chem. Catal. 2022;2:1211–1222. doi: 10.1016/j.checat.2022.03.020. [DOI] [Google Scholar]; (o) Ding L. Niu K. Liu Y. Wang Q. ChemSusChem. 2022;15:e202200367. doi: 10.1002/cssc.202200367. [DOI] [PubMed] [Google Scholar]
  3. Hossain A. Vidyasagar A. Eichinger C. Lankes C. Phan J. Rehbein J. Reiser O. Angew. Chem., Int. Ed. 2018;57:8288–8292. doi: 10.1002/anie.201801678. [DOI] [PubMed] [Google Scholar]
  4. (a) Morimoto J. Y. DeGraff B. A. J. Phys. Chem. 1972;76:1387–1388. doi: 10.1021/j100653a029. [DOI] [Google Scholar]; (b) Natarajan P. Ferraudi G. Inorg. Chem. 1981;20:3708–3712. doi: 10.1021/ic50225a025. [DOI] [Google Scholar]; (c) Li Z. Wang X. Xia S. Jin J. Org. Lett. 2019;21:4259–4265. doi: 10.1021/acs.orglett.9b01439. [DOI] [PubMed] [Google Scholar]; (d) Yatham V. R. Bellotti P. König B. Chem. Commun. 2019;55:3489–3492. doi: 10.1039/C9CC00492K. [DOI] [PMC free article] [PubMed] [Google Scholar]; (e) Li Q. Y. Gockel S. N. Lutovsky G. A. DeGlopper K. S. Baldwin N. J. Bundesmann M. W. Tucker J. W. Bagley S. W. Yoon T. P. Nat. Chem. 2022;14:94–99. doi: 10.1038/s41557-021-00834-8. [DOI] [PMC free article] [PubMed] [Google Scholar]; (f) Tu J.-L. Gao H. Luo M. Zhao L. Yang C. Guo L. Xia W. Green Chem. 2022;24:5553–5558. doi: 10.1039/D2GC01738E. [DOI] [Google Scholar]; (g) Zhang Y. Qian J. Wang M. Huang Y. Hu P. Org. Lett. 2022;24:5972–5976. doi: 10.1021/acs.orglett.2c02242. [DOI] [PubMed] [Google Scholar]; (h) Singh S. Dagar N. Roy S. R. Chem. Commun. 2022;58:3831–3834. doi: 10.1039/D2CC00840H. [DOI] [PubMed] [Google Scholar]; (i) Reichle A. Sterzel H. Kreitmeier P. Fayad R. Castellano F. N. Rehbein J. Reiser O. Chem. Commun. 2022;58:4456–4459. doi: 10.1039/D2CC00570K. [DOI] [PubMed] [Google Scholar]
  5. (a) Abderrazak Y. Bhattacharyya A. Reiser O. Angew. Chem., Int. Ed. 2021;60:21100–21115. doi: 10.1002/anie.202100270. [DOI] [PMC free article] [PubMed] [Google Scholar]; (b) Juliá F. ChemCatChem. 2022;14:e202200916. doi: 10.1002/cctc.202200916. [DOI] [Google Scholar]
  6. (a) Shang R. Liu L. Sci. China: Chem. 2011;54:1670–1687. doi: 10.1007/s11426-011-4381-0. [DOI] [Google Scholar]; (b) Rodríguez N. Goossen L. J. Chem. Soc. Rev. 2011;40:5030–5048. doi: 10.1039/C1CS15093F. [DOI] [PubMed] [Google Scholar]; (c) Cornella J. Larrosa I. Synthesis. 2012;44:653–676. doi: 10.1055/s-0031-1289686. [DOI] [Google Scholar]; (d) Wei Y. Hu P. Zhang M. Su W. Chem. Rev. 2017;117:8864–8907. doi: 10.1021/acs.chemrev.6b00516. [DOI] [PubMed] [Google Scholar]; (e) Patra T. Maiti D. Chem.–Eur. J. 2017;23:7382–7401. doi: 10.1002/chem.201604496. [DOI] [PubMed] [Google Scholar]; (f) Schwarz J. König B. Green Chem. 2018;20:323–361. doi: 10.1039/C7GC02949G. [DOI] [Google Scholar]; (g) Varenikov A. Shapiro E. Gandelman M. Chem. Rev. 2021;121:412–484. doi: 10.1021/acs.chemrev.0c00813. [DOI] [PMC free article] [PubMed] [Google Scholar]
  7. Chateauneuf J. Lusztyk J. Ingold K. U. J. Am. Chem. Soc. 1988;110:2886–2893. doi: 10.1021/ja00217a032. [DOI] [Google Scholar]
  8. Hilborn J. W. Pincock J. A. J. Am. Chem. Soc. 1991;113:2683–2686. doi: 10.1021/ja00007a049. [DOI] [Google Scholar]
  9. Qi R. Wang C. Huo Y. Chai H. Wang H. Ma Z. Liu L. Wang R. Xu Z. J. Am. Chem. Soc. 2021;143:12777–12783. doi: 10.1021/jacs.1c05890. [DOI] [PubMed] [Google Scholar]
  10. Li Y. Zhou K. Wen Z. Cao S. Shen X. Lei M. Gong L. J. Am. Chem. Soc. 2018;140:15850–15858. doi: 10.1021/jacs.8b09251. [DOI] [PubMed] [Google Scholar]
  11. (a) Xu P. López-Rojas P. Ritter T. J. Am. Chem. Soc. 2021;143:5349–5354. doi: 10.1021/jacs.1c02490. [DOI] [PubMed] [Google Scholar]; (b) Su W. Xu P. Ritter T. Angew. Chem., Int. Ed. 2021;60:24012–24017. doi: 10.1002/anie.202108971. [DOI] [PMC free article] [PubMed] [Google Scholar]
  12. (a) Dow N. W. Pedersen P. S. Chen T. Q. Blakemore D. C. Dechert-Schmitt A.-M. Knauber T. MacMillan D. W. C. J. Am. Chem. Soc. 2022;144:6163–6172. doi: 10.1021/jacs.2c01630. [DOI] [PMC free article] [PubMed] [Google Scholar]; (b) Chen T. Q. Pedersen P. S. Dow N. W. Fayad R. Hauke C. E. Rosko M. C. Danilov E. O. Blakemore D. C. Dechert-Schmitt A.-M. Knauber T. Castellano F. N. MacMillan D. W. C. J. Am. Chem. Soc. 2022;144:8296–8305. doi: 10.1021/jacs.2c02392. [DOI] [PMC free article] [PubMed] [Google Scholar]
  13. (a) Sheng W.-J. Ye Q. Yu W.-B. Liu R.-R. Xu M. Gao J.-R. Jia Y.-X. Tetrahedron Lett. 2015;56:599–601. doi: 10.1016/j.tetlet.2014.12.085. [DOI] [Google Scholar]; (b) Drapeau M. P. Bahri J. Lichte D. Gooßen L. J. Angew. Chem., Int. Ed. 2019;58:892–896. doi: 10.1002/anie.201812068. [DOI] [PubMed] [Google Scholar]; (c) Shen L. Zhang J. Xie J. Chin. J. Org. Chem. 2019;39:1153–1159. doi: 10.6023/cjoc201811010. [DOI] [Google Scholar]
  14. Bentley H. R. McDermott E. E. Pace J. Whitehead J. K. Moran T. Nature. 1949;163:675–676. doi: 10.1038/163675a0. [DOI] [PubMed] [Google Scholar]
  15. (a) Frings M. Thomé I. Bolm C. Beilstein J. Org. Chem. 2012;8:1443–1451. doi: 10.3762/bjoc.8.164. [DOI] [PMC free article] [PubMed] [Google Scholar]; (b) Otocka S. Kwiatkowska M. Madalińska L. Kiełbasiński P. Chem. Rev. 2017;117:4147–4181. doi: 10.1021/acs.chemrev.6b00517. [DOI] [PubMed] [Google Scholar]; (c) Zheng W. Chen X. Chen F. He Z. Zeng Q. Chem. Rec. 2021;21:396–416. doi: 10.1002/tcr.202000134. [DOI] [PubMed] [Google Scholar]; (d) Andresini M. Tota A. Degennaro L. Bull J. A. Luisi R. Chem.–Eur. J. 2021;27:17293–17321. doi: 10.1002/chem.202102619. [DOI] [PMC free article] [PubMed] [Google Scholar]; (e) Zeng D. Ma Y. Deng W.-P. Wang M. Jiang X. Angew. Chem., Int. Ed. 2022;61:e202207100. doi: 10.1002/anie.202207100. [DOI] [PubMed] [Google Scholar]; (f) Zeng D. Ma Y. Deng W.-P. Wang M. Jiang X. Nat. Synth. 2022;1:455–463. doi: 10.1038/s44160-022-00060-1. [DOI] [Google Scholar]
  16. (a) Frings M. Bolm C. Blum A. Gnamm C. Eur. J. Med. Chem. 2017;126:225–245. doi: 10.1016/j.ejmech.2016.09.091. [DOI] [PubMed] [Google Scholar]; (b) Mäder P. Kattner L. J. Med. Chem. 2020;63:14243–14275. doi: 10.1021/acs.jmedchem.0c00960. [DOI] [PubMed] [Google Scholar]; (c) Han Y. Xing K. Zhang J. Tong T. Shi Y. Cao H. Yu H. Zhang Y. Liu D. Zhao L. Eur. J. Med. Chem. 2021;209:112885–112912. doi: 10.1016/j.ejmech.2020.112885. [DOI] [PubMed] [Google Scholar]
  17. (a) Gais H.-J. Mueller H. Bund J. Scommoda M. Brandt J. Raabe G. J. Am. Chem. Soc. 1995;117:2453–2466. doi: 10.1021/ja00114a009. [DOI] [Google Scholar]; (b) Nagatomo M. Yoshioka S. Inoue M. Chem.–Eur. J. 2015;10:120–123. doi: 10.1002/asia.201402983. [DOI] [PubMed] [Google Scholar]; (c) Proietti G. Kuzmin J. Temerdashev A. Z. Dinér P. J. Org. Chem. 2021;86:17119–17128. doi: 10.1021/acs.joc.1c02241. [DOI] [PMC free article] [PubMed] [Google Scholar]
  18. (a) Johnson C. R. Stark Jr. C. J. Tetrahedron Lett. 1979;20:4713–4716. doi: 10.1016/S0040-4039(01)86691-0. [DOI] [Google Scholar]; (b) Bolm C. Simić O. J. Am. Chem. Soc. 2001;123:3830–3831. doi: 10.1021/ja004261k. [DOI] [PubMed] [Google Scholar]; (c) Langner M. Bolm C. Angew. Chem., Int. Ed. 2004;43:5984–5987. doi: 10.1002/anie.200460953. [DOI] [PubMed] [Google Scholar]
  19. Frings M. Thome I. Bolm C. Beilstein J. Org. Chem. 2012;8:1443–1451. doi: 10.3762/bjoc.8.164. [DOI] [PMC free article] [PubMed] [Google Scholar]
  20. (a) Zhou T. Qian P.-F. Li J.-Y. Zhou Y.-B. Li H.-C. Chen H.-Y. Shi B.-F. J. Am. Chem. Soc. 2021;143:6810–6816. doi: 10.1021/jacs.1c03111. [DOI] [PubMed] [Google Scholar]; (b) Zhang Y.-F. Dong X.-Y. Cheng J.-T. Yang N.-Y. Wang L.-L. Wang F.-L. Luan C. Liu J. Li Z.-L. Gu Q.-S. Liu X.-Y. J. Am. Chem. Soc. 2021;143:15413–15419. doi: 10.1021/jacs.1c07726. [DOI] [PubMed] [Google Scholar]
  21. (a) Bolm C. Hildebrand J. P. Tetrahedron Lett. 1998;39:5731–5734. doi: 10.1016/S0040-4039(98)01199-X. [DOI] [Google Scholar]; (b) Bolm C. Hildebrand J. P. J. Org. Chem. 2000;65:169–175. doi: 10.1021/jo991342u. [DOI] [PubMed] [Google Scholar]; (c) Cho G. Y. Rémy P. Jansson J. Moessner C. Bolm C. Org. Lett. 2004;6:3293–3296. doi: 10.1021/ol048806h. [DOI] [PubMed] [Google Scholar]; (d) Sedelmeier J. Bolm C. J. Org. Chem. 2005;70:6904–6906. doi: 10.1021/jo051066l. [DOI] [PubMed] [Google Scholar]; (e) Correa A. Bolm C. Adv. Synth. Catal. 2008;350:391–394. doi: 10.1002/adsc.200700508. [DOI] [Google Scholar]; (f) Wimmer A. König B. Org. Lett. 2019;21:2740–2744. doi: 10.1021/acs.orglett.9b00698. [DOI] [PMC free article] [PubMed] [Google Scholar]; (g) Liu D. Liu Z.-R. Ma C. Jiao K.-J. Sun B. Wei L. Lefranc J. Herbert S. Mei T.-S. Angew. Chem., Int. Ed. 2021;60:9444–9449. doi: 10.1002/anie.202016310. [DOI] [PubMed] [Google Scholar]; (h) Zhu C. Kale A. P. Yue H. Rueping M. JACS Au. 2021;1:1057–1065. doi: 10.1021/jacsau.1c00148. [DOI] [PMC free article] [PubMed] [Google Scholar]
  22. (a) Moessner C. Bolm C. Org. Lett. 2005;7:2667–2669. doi: 10.1021/ol050816a. [DOI] [PubMed] [Google Scholar]; (b) Wang C. Zhang H. Wells L. A. Liu T. Meng T. Liu Q. Walsh P. J. Kozlowski M. C. Jia T. Nat. Commun. 2021;12:932. doi: 10.1038/s41467-021-21156-w. [DOI] [PMC free article] [PubMed] [Google Scholar]
  23. Kim J. Ok J. Kim S. Choi W. Lee P. H. Org. Lett. 2014;16:4602–4605. doi: 10.1021/ol502174n. [DOI] [PubMed] [Google Scholar]
  24. Zhu H. Teng F. Pan C. Cheng J. Yu J.-T. Tetrahedron Lett. 2016;57:2372–2374. doi: 10.1016/j.tetlet.2016.04.042. [DOI] [Google Scholar]
  25. Jiang Y. You Y. Dong W. Peng Z. Zhang Y. An D. J. Org. Chem. 2017;82:5810–5818. doi: 10.1021/acs.joc.7b00633. [DOI] [PubMed] [Google Scholar]
  26. Dong W. Liu C. Ma X. Zhang Y. Peng Z. Xie D. An D. Tetrahedron. 2019;75:3886–3893. doi: 10.1016/j.tet.2019.05.039. [DOI] [Google Scholar]
  27. (a) Candish L. Freitag M. Gensch T. Glorius F. Chem. Sci. 2017;8:3618–3622. doi: 10.1039/C6SC05533H. [DOI] [PMC free article] [PubMed] [Google Scholar]; (b) Kubosaki S. Takeuchi H. Iwata Y. Tanaka Y. Osaka K. Yamawaki M. Morita T. Yoshimi Y. J. Org. Chem. 2020;85:5362–5369. doi: 10.1021/acs.joc.0c00055. [DOI] [PubMed] [Google Scholar]
  28. Cao R. Shi Q. Sun D. Hong M. Bi W. Zhao Y. Inorg. Chem. 2002;41:6161–6168. doi: 10.1021/ic0258577. [DOI] [PubMed] [Google Scholar]
  29. (a) Kunkely H. Vogler A. Inorg. Chim. Acta. 2004;357:888–890. doi: 10.1016/j.ica.2003.07.006. [DOI] [Google Scholar]; (b) Ichiishi N. Canty A. J. Yates B. F. Sanford M. S. Organometallics. 2014;33:5525–5534. doi: 10.1021/om5007903. [DOI] [PMC free article] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

SC-013-D2SC05442F-s001
SC-013-D2SC05442F-s001.pdf (5.5MB, pdf)

Data Availability Statement

Procedures and compound characterization are provided in the ESI.†

Articles from Chemical Science are provided here courtesy of Royal Society of Chemistry

RESOURCES