Abstract
The glove manufacturing industry has seen tremendous growth recently, spurred on by the COVID-19 pandemic. A long-standing shortage of supply of disposable medical gloves has highlighted an urgent need to increase production capacity. This requires glove manufacturers to be quick in adopting best practices, in line with Industry 4.0, in order to optimize various aspects of the industry. Unfortunately, information available in the existing literature is, however, limited due to the confidential nature of the majority of research in this area. This article discusses some opportunities and challenges related to this important chemical industry, from the perspective of control engineering. These insights can point to some interesting directions of future work.
Keywords: Control engineering, glove manufacturing, latex dipping, rubber gloves, vulcanization process
References
- Annergren, M. and Larsson, C. (2016). MOOSE2: Model Based Optimal Input Design Toolbox for MATLAB (Version 2): User’s Guide. Online. https://www.kth.se/polopoly_fs/1.643297.1550158446!/userguide.pdf.
- Darby M.L., Nikolaou M. MPC: Current practice and challenges. Control Engineering Practice. 2012;20:328–342. [Google Scholar]
- Devaraj V., Nur F.I, Dayang A.I.H., Nor H.K., Zairossani M.N. Utilization of waste from natural rubber glove manufacturing line. ASEAN Journal on Science and Technology for Development. 2015;32:94–103. [Google Scholar]
- Digital Edge. (2021). The Slow and Steady Route to Digital Transformation. 29 March, 2021.
- DipTech Systems, Inc. (2019). Automatic Stripping of Gloves in a High Volume Production Environment: A Technical Presentation. 17 September, 2019.
- Du Chesne A., Bojkova A., Gapinski J., Seip D., Fischer P. Film formation and redispersion of waterborne latex coatings. Journal of Colloid and Interface Science. 2000;224:91–98. doi: 10.1006/jcis.1999.6645. [DOI] [PubMed] [Google Scholar]
- Forbes, M.G., Patwardhan, R.S., Hamadah, H., and Gopaluni, R.B. (2015). Model predictive control in industry: Challenges and opportunities. IFAC-PapersOnLine 48– 8, 531–538.
- Fortune Business Insights (2021). Disposable Medical Gloves Market Size 2021. 7 April 2021.
- Gunasegaram D.R., Murphy A.B., Barnard A., DebRoy T., Matthews M.J., Ladani F., Gu D. Towards developing multiscale-multiphysics models and their surrogates for digital twins of metal additive manufacturing. Additive Manufacturing. 2021;46 article 102089. [Google Scholar]
- Jirasukprasert P., Garza-Reyes J.A., Kumar V., Lim M.K. A Six Sigma and DMAIC application for the reduction of defects in a rubber gloves manufacturing process. International Journal of Lean Six Sigma. 2013;5:2–21. [Google Scholar]
- Koranuntachai, W., Chantrasmi, T., and Nontakaew, U. (2020). Numerical simulation of flow past glove-shaped formers in latex dipping to consider tip effect to free surface flow. IOP Conference Series: Materials Science and Engineering 886, article 012038.
- New Straits Times (2021). Lack of Automation, Foreign Labour Reliance Hinder Full Glove Production Reopening. 29 July, 2021.
- Nikkei Asia. (2020). Top Glove Makes Automation Push Amid Pandemic Labor Shortage. 2 July, 2020.
- Palací-López D., Borràs-Ferrís J., de Oliveria L.T.d.S., Ferrer A. Multivariate Six Sigma: A case study in Industry 4.0. Processes. 2020;8 article 1119. [Google Scholar]
- Research and Markets (2020a). World Market Outlook for the Disposable Gloves and Materials Markets 2020-2025: The World Health Organisation Estimates Manufacturing Should be Increased by 40% to Meet Demand. 23 September, 2020.
- Research and Markets (2020b). Global IoT in Manufacturing Market (2020 to 2025) – Rising Number of Data Centers Presents Opportunities. 24 December, 2020.
- Reuters (2021). Malaysian Rubber Glove Group Says Demand to Outstrip Supply Until 2023. 15 March 2021.
- Suvanjumrat C., Loksupapaiboon K. Improvement of thermal distribution in the rubber-glove former conveyor oven by OpenFOAM. Engineering Journal. 2020;24:109–120. [Google Scholar]
- Swee, S.L.N., Toh, G.G., Yip, M.W., and Tai, S.C. (2018). Systematic innovation for manufacturing quality improvement. MATEC Web of Conferences 221, article 02005.
- Tan A.H., Godfrey K.R. The generation of binary and near-binary pseudorandom signals: An overview. IEEE Transactions on Instrumentation and Measurement. 2002;51:583–588. [Google Scholar]
- Tan A.H., Godfrey K.R. Industrial Process Identification: Perturbation Signal Design and Applications. Springer; Cham, Switzerland: 2019. [Google Scholar]
- Tan, A.H., Cham, C.L., and Lim, E.Y.H. (2020). Analysis and prediction of glove quality based on manufacturing factors. IEEE International Conference on Power and Energy, 7–8 December, Penang, Malaysia, 420–425.
- Tan, A.H., Tou, T.Y., and Yap, T.T.V. (2021). Design of a simulation program to model vulcanization ovens in glove manufacturing. International Conference on Robotics, Electrical and Signal Processing Techniques, 5–7 January, Dhaka, Bangladesh, 424–428.
- Tan, K.Y., Phang, S.W., Phang, C.K., Choh, J.L., Goh, C.P., Wong, C.B., and Tee, T.T. (2018). Preliminary study on effect of chemical composition alteration on elastic recovery and stress recovery of nitrile gloves. MATEC Web of Conferences 152, article 01011.
- Tekasakul P., Dejchanchaiwong R., Tirawanichakul Y., Tirawanichakul S. Three-dimensional numerical modeling of heat and moisture transfer in natural rubber sheet drying process. Drying Technology. 2015;33:1124–1137. [Google Scholar]
- Wahid, Z. (1998). Potential for Process Improvement of the Rubber Glove Manufacturing Process – An Industrial Case Study Ph.D. Thesis, University of Newcastle Upon Tyne, UK.
- Zhu Q., Qin S.J., Dong Y. Dynamic latent variable regression for inferential sensor modeling and monitoring. Computers and Chemical Engineering. 2020;137 article 106809. [Google Scholar]