Abstract
Pileadanxiaensis L.F.Fu, A.K.Monro & Y.G.Wei, a new species of Urticaceae from Danxia landform, Guangdong, China, is described and photographed. Phylogenetic analyses based on three DNA regions (ITS, trnL-F and rbcL) suggest that the new species belongs to P.sect.Pilea. Within the section, the new species is morphologically most similar to P.sinocrassifolia and P.peploides. Plastid genome and ribosomal DNA (rDNA) sequences of the new species are assembled and annotated. The plastid genome is 151,857 bp in length and comprises two inverted repeats (IRs) of 25,307 bp separated by a large single-copy of 82,836 bp and a small single-copy of 18,407 bp. A total of 113 functional genes are recovered, comprising 79 protein-coding genes, 30 tRNA genes, and four rRNA genes. A global conservation assessment suggests that P.danxiaensis should be classified as of Least Concern (LC).
Keywords: Danxia landscape, new taxon, plastome, taxonomy
Introduction
Pilea Lindl. is the largest genus in the Urticaceae that comprises ca 715 species worldwide (Monro 2004; Fu et al. 2022). Pilea has a pantropical and subtropical distribution with the exception of Australia and New Zealand and is characterized by succulent herbs, shrubs and epiphytes and many point-endemic species. Outside the Neotropics, Indomalaya is the main center of diversification for Pilea (Monro 2006; Fu et al. 2022). Within Indomalaya, China contains more than 90 species (Chen and Monro 2003, Chen et al. 2007; Monro et al. 2012; Wang 2014, 2016; Fu et al. 2017; Yang et al. 2018).
A recent systematic study has demonstrated that Pilea is monophyletic after the exclusion of species of Achudemia and Lecanthus (Fu et al. 2022). The newly circumscribed genus has been classified into eight sections: Pileasect.Tetraphyllae Y.G.Wei & A.K.Monro, sect. Trimeris Y.G.Wei & A.K.Monro, sect. Lecanthoides C.J.Chen, sect. Angulatae L.F.Fu & Y.G.Wei, sect. Tetrameris C.J.Chen, sect. Verrucosae L.F.Fu & Y.G.Wei, sect. Plataniflorae L.F.Fu & Y.G.Wei and sect. Pilea (Fu et al. 2022). These sections can be delimited by leaf margin morphology, stipule length, inflorescence architecture, flower sepal number and achene ornamentation (Fu et al. 2022).
While conducting field investigations into the Danxia flora of Guangdong, China, we encountered an unknown species of Pilea with 3-parted female flowers, 4-parted male flowers, short stipules (≤10 mm), entire leaf margins and ornamented or rarely smooth achenes that placed it within Pileasect.Plataniflorae or sect. Pilea (Fu et al. 2022). After a thorough literature survey and review of herbarium specimens at IBK, IBSC, K, PE and SYS, along with molecular studies, we confirmed that this plant was a hitherto undescribed species of Pileasect.Pilea.
Materials and methods
Morphological observations and conservation assessment
All morphological characters were observed from field and herbarium specimens using an Olympus SZX16 binocular microscope (Japan). For achene morphology, we also undertook scanning electron micrograph (SEM) observations. Achene materials were collected from specimens, dried, and mounted using double-sided adhesive tape and coated with gold using a sputter coater. The materials were then observed and photographed under a ZEISS EVO18 scanning electron microscope. At least ten achenes were used to determine their size and surface ornamentation.
A species conservation assessment was undertaken for the new species described here using IUCN criteria (IUCN 2019). Calculations of the extent of occurrence (EOO) and area of occupation (AOO) were undertaken using the online conservation assessment tool GeoCATAT (Bachman et al. 2011). The AOO was calculated using a cell width of 2 km as recommended by IUCN (2019).
Genomic DNA extraction and sequencing
Leaf material for DNA extraction was dried using silica gel (Chase and Hills 1991). Genomic DNA was extracted using a modified CTAB protocol (Chen et al. 2014). The total gDNA sample was sent to Majorbio (http://www.majorbio.com/, China) for library construction and next-generation sequencing. Short-insert (350 bp) paired-end read libraries preparation and 2 × 150 bp sequencing were performed on an Illumina (HiSeq4000) genome analyzer platform. Approximately 2 Gb of raw data for the new species was filtered using the FASTX-Toolkit to obtain high-quality clean data by removing adaptors and low-quality reads (http://hannonlab.cshl.edu/fastx_toolkit/download.html).
Plastid genome and ribosomal DNA (rDNA) assembly and annotation
Clean reads were paired and imported in Geneious Prime (Kearse et al. 2012). For plastid genome assembly, the clean reads were mapped to published plastid genome sequence as reference (Fu et al. 2019) using the Fine Tuning option in Geneious Prime (iterating set as 10 times) to exclude nuclear and mitochondrial reads. Then, de novo assembly was performed using Geneious Prime with a medium-low sensitivity setting to assemble plastid genome sequence. The generated contigs were mapped by the clean reads using the Fine Tuning option in Geneious Prime (iterating set as 10 times) to fill gaps. Contigs were able to be concatenated using the Repeat Finder option implemented in Geneious Prime until a ~130 kb contig (including SSC, IR and LSC) being built. The Inverted repeat (IR) region was determined by the Repeat Finder option in Geneious Prime and was reverse copied to obtain the complete plastid genome. The annotation approach of the assembled plastid genome was performed using CPGAVAS2 and PGA (Qu et al. 2019; Shi et al. 2019). The process of rDNA assembly is similar to the above with the exception of different reference (Fu et al. 2021) and iterating as none. The annotation approach of rDNA was performed using Annotate option in Geneious Prime.
Phylogenetic analyses
We generated a phylogeny using sequences data from previous phylogenies of Pilea s.l. (Fu et al. 2022). We extracted three DNA regions (ITS, trnL-F and rbcL) from assembled rDNA and complete plastid genome sequences, respectively, of the new species and downloaded all sequences data used in Fu et al. (2022) from GenBank (details see Suppl. material 1). This resulted in 145 accessions representing 131 taxa in total, 112 taxa of which belong to Pilea s.l. as in-group, and 21 species of which belong to Elatostema s.l., other tribes of Urticaceae, Moraceae and Cannabaceae, as out-group (Appendix 1). Three datasets (ITS, trnL-F and rbcL) were aligned independently using multiple alignment using fast Fourier transform (MAFFT) version 7.0 (Katoh and Standley 2013) with default settings, followed by manual adjustment. As there was no incongruence that affected the topology of the ingroup taxa as described in Fu et al. (2022), phylogenies were reconstructed based on the combined dataset using Maximum Likelihood (ML) and Bayesian inference (BI). The BI and ML analyses were performed following Fu et al. (2022).
Results
Characteristics of the complete plastid genome and ribosomal DNA
The complete plastid genome and ribosomal DNA (rDNA) sequences of Pileadanxiaensis comprised 151,857 bp (Fig. 1) and 5,788 bp, respectively. The characteristics and statistics of plastid genome are summarized in Tables 1 and 2.
Figure 1.
Plastid genome map of Pileadanxiaensis. The thick lines on the outer complete circle identify the inverted repeat regions (IRa and IRb). The innermost track of the plastome shows the GC content. Genes on the outside and inside of the map are transcribed in clockwise and counter directions, respectively.
Table 1.
Summary of whole plastid genome of Pileadanxiaensis.
| Characteristic | Pileadanxiaensis |
|---|---|
| Size (bp) | 151,857 |
| LSC length (bp) | 82,836 |
| SSC length (bp) | 18,407 |
| IR length (bp) | 25,307 |
| Number of genes | 113 |
| Protein-coding genes | 79 |
| rRNA genes | 4 |
| tRNA genes | 30 |
| LSC GC% | 34.30% |
| SSC GC% | 30.70% |
| IR GC% | 42.80% |
Table 2.
Genes encoded in plastid genome of Pileadanxiaensis.
| Group of genes | Gene name |
|---|---|
| tRNA genes | trnA-UGC (×2), trnC-GCA, trnD-GUC, trnE-UUC, trnF-GAA, trnfM-CAU, trnG-GCC, trnG-UCC, trnH-GUG, trnI-CAU (×2), trnI-GAU (×2), trnK-UUU, trnL-CAA (×2), trnL-UAA, trnL-UAG, trnM-CAU, trnN-GUU (×2), trnP-UGG, trnQ-UUG, trnR-ACG (×2), trnR-UCU, trnS-GCU, trnS-GGA, trnS-UGA, trnT-GGU, trnT-UGU, trnV-GAC (×2), trnV-UAC, trnW-CCA, trnY-GUA |
| rRNA genes | rrn16 (×2), rrn23 (×2), rrn4.5 (×2), rrn5 (×2) |
| Ribosomal small subunit | rps16*, rps2, rps14, rps4, rps18, rps12** (×2), rps11, rps8, rps3, rps19, rps7 (×2), rps15 |
| Ribosomal large subunit | pl33, rpl20, rpl36, rpl14, rpl16*, rpl22, rpl2* (×2), rpl23 (×2), rpl32 |
| DNA-dependent RNA poly merase | poC2, rpoC1*, rpoB, rpoA |
| Photosystem I | psaB, psaA, psaI, psaJ, psaC |
| Photosystem II | psbA, psbK, psbI, psbM, psbC, psbZ, psbG, psbJ, psbL, psbF, psbE, psbB, psbT, psbN, psbH |
| Large subunit of rubisco | rbcL |
| NADH dehydrogenase | ndhJ, ndhK, ndhC, ndhB* (×2), ndhF, ndhD, ndhE, ndhG, ndhI, ndhA*, ndhH |
| Cytochrome b/f complex | petN, petA, petL, petG, petB*, petD* |
| ATP synthase | atpA, atpF*, atpH, atpI, atpE, atpB |
| Maturase | matK (The matK is localized between the exons coding for the trnK-UUU) |
| Subunit of acetyl-CoA carboxylase | accD |
| Envelope membrane protein | cemA |
| Protease | clpP** |
| Translational initiation factor | infA |
| C-type cytochrome synthesis | ccsA |
| Conserved open reading frames | ycf3**, ycf4, ycf2 (×2), ycf1, ycf15 (×2) |
Note: Genes with one or two introns are indicated by one (*) or two asterisks (**), respectively. Genes in the IR regions are followed by the (× 2) symbol.
Phylogenetic reconstruction
The characteristics and statistics of the datasets used in this study are summarized in Table 3. ML and BI analyses of dataset of three DNA regions (ITS, trnL-F and rbcL) resulted in the same tree topologies that both indicate the new species recovering in the clade C8a of Pilea (PP = 1, BS = 100%) (Fig. 2).
Table 3.
Statistics for the molecular datasets used in this study.
| Number of sequences | Aligned length (bp) | Variable characters (bp) | Parsimony information characters (bp) | Model used | |
|---|---|---|---|---|---|
| ITS | 142 | 528 | 419 | 339 | - |
| trnL-F | 139 | 677 | 667 | 38 | - |
| rbcL | 84 | 637 | 318 | 315 | - |
| Combined | 142 | 1,842 | 1,404 | 692 | GTR+GAMMA |
Figure 2.
Phylogenetic tree of Pilea s.l. generated from Bayesian Inference (BI) of combined dataset (ITS, trnL-trnF and rbcL). Numbers below the branches indicate the posterior probability (≥0.5) of BI and bootstrap values (≥50%) of the ML analyses. ‘*’ indicates supports of 1.0/100. The bold (Pileadanxiaensis) indicates the new species.
Taxonomic treatment
. Pilea danxiaensis
L.F.Fu, A.K.Monro & Y.G.Wei sp. nov.
D182AA2C-FBB8-5CDC-8DE8-84398D74B6EA
urn:lsid:ipni.org:names:77303547-1
Figure 3.
Plate of PileadanxiaensisA habitat B habit C leaves and inflorescence D stipules E staminate inflorescence F pistillate inflorescence G staminate flower H pistillate flower I achene with pistillate sepals J LM of achene KSEM of achene.
Type.
China. Guangdong: Danxiashan National Park, Renhua County, Shaoguan City, 25.020°N, 113.752°E (WGS84), elev. 134 m, 2 April 2022, Liao Wen-Bo, Fan Qiang and Liao Li-Juan DNPC1728 (holotype IBK; isotypes IBK, SYS).
Diagnosis.
Most similar to Pileasinocrassifolia C.J.Chen from which it can be distinguished by the longer stipule (1.3–1.5 mm versus 1 mm), petiole (2–8 mm versus 0.2–0.6 mm) and staminate peduncle (8–25 mm versus 1.5–7 mm).
Description.
Herbs prostrate, stem 30–200 × 1 mm, light green when fresh, drying yellowish-brown, glabrous, succulent, cystoliths fusiform, 0.2–0.4 mm long. Stipules, 1.3–1.5 × 1.7–2.1 mm, reniform, drying brown, papery, with dense cystoliths. Leaves petiolate, distichous, clustered towards the stem apex; petioles 2–8 mm long, glabrous, cystoliths densely scattered; laminae at each node equal or subequal, 3–15 × 5–20 mm, length: width ratio 0.7–0.9:1, suborbicular to broadly ovate, succulent, papery when dry; adaxial surface drying grey-green, dark green when fresh, glabrous, with cystoliths densely scattered, ca 0.3 mm, linear or fusiform; abaxial surface drying light green, green when fresh, glabrous, rugose when dry, 3-veined, secondary veins 3–6 pairs, borne at 45–60° to the midrib, with cystoliths sparsely scattered, ca 0.3 mm, linear or fusiform; apex obtuse or subretuse, base cuneate, rounded or subtruncate, margin entire and revolute. Inflorescences in upper nodes, appearing terminal, monoecious. Staminate inflorescences 10–30 mm, bearing 10–25 flowers in a capitulum or occasionally a glomerule; peduncle 8–25 × 0.5 mm, glabrous; pedicels ca 0.8 mm, glabrous. Staminate flowers 1 × 1 mm, green, drying light green, sepals 4, ca 1.8 mm; valvate, elliptic, glabrous, the subapical appendage ca 0.1 mm, corniculate, glabrous; stamens 4. Pistillate inflorescences 10–20 mm, bearing 20–50 flowers in a cyme or glomerule; peduncle 8–18 × ca 0.5 mm, glabrous; pedicels ca 0.5 mm. Pistillate flowers ca 0.5 mm, sepals 3, subequal, ca 0.3 mm, valvate, triangular-ovate, glabrous, the subapical appendage ca 0.1 mm. Infructescences 15–20 mm; peduncle 15–18 mm; achenes 0.68–0.72 × 0.40–0.46 mm, ovoid, spinulose-verrucose, rarely smooth.
Distribution and habitat.
Pileadanxiaensis L.F.Fu, A.K.Monro & Y.G.Wei is known from a single locality in Renhua County, Shaoguan City, Guangdong, China, where it grows in a ravine on the Danxia landform, a petrographic geomorphology formed from Cretaceous sandstones and conglomerates.
Phenology.
Flowering from March to May, fruiting from April to June.
Etymology.
The species epithet is named after the Danxia landform with which the species is associated.
Vernacular name.
dān xiá lěng shuǐ huā (Chinese pronunciation); 丹霞冷水花 (Chinese name).
Conservation status.
At present, Pileadanxiaensis is known from a single locality, the Danxiashan National Park. The park covers 140 km2 and the massif from which the type collection was made encompasses ca 114 km2 (Google Earth Pro). Within that locality, the population of P.danxiaensis is estimated to number between 1,000 and 5,000 individuals distributed between 10 sub-populations, of which only one has been directly observed. A remote survey of the Danxiashan National Park using Google Earth Pro, suggests that the protected area itself is well protected and we observed no active threat or continuing decline in population size. Pileadanxiaensis is therefore classified as Least Concern (LC).
Additional specimen examined.
China. Guangdong: Danxiashan National Geopark, Renhua County, Shaoguan City, 25.004°N, 113.655°E (WGS84), elev. 466 m, 20 April 2018, Fan Qiang and Huang Yan-Shuang 16993 (IBK, SYS).
Discussion
Fu et al. (2022) proposed a new infrageneric classification based on molecular and morphological evidence that suggested the leaf margin, stipule length, inflorescence architecture, flower sepal-number and achene ornamentation can be reliably used to place taxa into sections. Our research demonstrates that Pileadanxiaensis sits within clade C8a (Fig. 2) corresponding to P.sect.Pilea. Section Pilea is the most species-rich section in Pilea and has its center of species-richness in the neotropics from where several new species have been described in recent years (Monro 2006; Cabral et al. 2020; Beutelspacher and García-Martínez 2021). The morphology of Pileadanxiaensis, and specifically the 3-parted female flowers, 4-parted male flowers, short stipules (≤10 mm) and un-ornamented achenes, are congruent with it belonging to this section. SEM results indicate the achene length of P.danxiaensis to be 0.68–0.72 mm (≤ 0.8 mm), further supporting the inclusion of this species in P.sect.Pilea, and of a shift to smaller fruits as more lineages have formed (Fu et al. 2022).
Within Pileasect.Pilea, the new species is most morphologically similar to P.sinocrassifolia and P.peploides from which it is distinguished in Table 4.
Table 4.
Diagnostic comparison of Pileadanxiaensis, P.sinocrassifolia and P.peploides.
| Characters | P.danxiaensis | P.sinocrassifolia | P.peploides |
|---|---|---|---|
| Stipule shape and length | reniform, 1.3–1.5 mm | triangular, ca 1 mm | triangular, ca 0.5 mm |
| Petiole length | 2–8 mm | 0.2–0.6 mm | 3–20 mm |
| Staminate peduncle length | 8–25 mm | 1.5–7 mm | 2–5 mm |
| Pistillate tepal number | 3 | NA | 2 |
Conclusions
This study describes a new species of Pilea based on morphological and molecular evidence. Our results support the new infrageneric classification proposed by Fu et al. (2022). The reported plastid genome provides informative data to support further studies on the systematics, evolution, and conservation of the genus.
Supplementary Material
Acknowledgements
We would like to thank the staff at IBK, IBSC, K, PE and SYS who provided help for checking specimens. We are also grateful to Ms. Liao Li-Juan for participating in fieldwork. This work was supported by the Guangdong Provincial Special Research Grant for the Creation of National Parks (2021GJGY034), the National Natural Science Foundation of China (grant number 31860042), and the Light of West China Program of the Chinese Academic of Sciences ([2020]82).
Citation
Fu L-F, Xiong C, Monro AK, Fan Q, Chen Z-X, Wen F, Xin Z-B, Wei Y-G, Liao W-B (2022) Pilea danxiaensis (Urticaceae), a new species in the Danxia landform from Guangdong, China including a description of the entire chloroplast genome. PhytoKeys 204: 109–119. https://doi.org/10.3897/phytokeys.204.86857
Contributor Information
Yi-Gang Wei, Email: weiyigang@aliyun.com.
Wen-Bo Liao, Email: lsslwb@mail.sysu.edu.cn.
Supplementary materials
Appendix S1
This dataset is made available under the Open Database License (http://opendatacommons.org/licenses/odbl/1.0/). The Open Database License (ODbL) is a license agreement intended to allow users to freely share, modify, and use this Dataset while maintaining this same freedom for others, provided that the original source and author(s) are credited.
Long-Fei Fu, Chi Xiong, Alexandre Monro, Qiang Fan, Zai-Xiong Chen, Fang Wen, Zi-Bing Xin, Yi-Gang Wei, Wen-Bo Liao
Data type
GenBank accession numbers.
Explanation note
Taxa and GenBank accession numbers of DNA sequences used in this study.
Reference
- Bachman S, Moat J, Hill AW, De la Torre J, Scott B. (2011) Supporting Red List threat assessments with GeoCATAT: geospatial conservation assessment tool. In: Smith V, Penev L. (Eds) e-Infrastructures for data publishing in biodiversity science.ZooKeys 150: 117–126. 10.3897/zookeys.150.2109 [DOI] [PMC free article] [PubMed]
- Beutelspacher CR, García-Martínez R. (2021) Una nueva especie de Pilea (Urticaceae) de Chiapas, México.
- Cabral FS, Gaglioti AL, Fiaschi P. (2020) Two new species of Pilea Lindl. (Urticaceae) from southern Brazil. Systematic Botany 45(4): 822–825. 10.1600/036364420X16033962925268 [DOI] [Google Scholar]
- Chase MW, Hills H. (1991) Silica gel: An ideal material for field preservation of leaf samples for DNA studies. Taxon 40(2): 215–220. 10.2307/1222975 [DOI] [Google Scholar]
- Chen CJ, Monro AK. (2003) Pilea. In: Wu ZY, Raven PH. (Eds) Flora of China, vol.5. Science Press, Beijing, and Missouri Botanical Garden Press, St. Louis, 76–189.
- Chen CJ, Monro AK, Chen L. (2007) Name changes for Chinese Pilea (Urticaceae). Novon 17: 24–26. 10.3417/1055-3177(2007)17[24:NCFCPU]2.0.CO;2 [DOI]
- Chen LY, Song MS, Zha HG, Li ZM. (2014) A modified protocol for plant genome DNA extraction. Plant Diversity and Resources 36: 375–380. 10.7677/ynzwyj201413156 [DOI] [Google Scholar]
- Fu LF, Huang SL, Monro AK, Liu Y, Wen F, Wei YG. (2017) Pileanonggangensis (Urticaceae), a new species from Guangxi, China. Phytotaxa 313(1): 130–136. 10.11646/phytotaxa.313.1.9 [DOI] [Google Scholar]
- Fu LF, Xin ZB, Wen F, Li S, Wei YG. (2019) Complete chloroplast genome sequence of Elatostemadissectum (Urticaceae). Mitochondrial DNA Part B, Resources 4(1): 838–839. https://10.1080/23802359.2019.1567292 [DOI] [PMC free article] [PubMed] [Google Scholar]
- Fu LF, Monro AK, Yang TG, Wen F, Pan B, Xin ZB, Zhang ZX, Wei YG. (2021) Elatostemaqinzhouense (Urticaceae), a new species from limestone karst in Guangxi, China. PeerJ 9: e11148. 10.7717/peerj.11148 [DOI] [PMC free article] [PubMed]
- Fu LF, Wen F, Maurin O, Rodda M, Gardner EM, Xin ZB, Wei YG, Monro AK. (2022) A revised delimitation of the species-rich genus Pilea (Urticaceae) supports the resurrection of Achudemia and a new infrageneric classification. Taxon 71(4): 796–813. 10.1002/tax.12711 [DOI] [Google Scholar]
- IUCN (2019) Guidelines for using the IUCN Red List Categories and Criteria. Version 14. Prepared by the Standards and Petitions Subcommitttee. [Available at] http://www.iucnredlist.org/documents/RedListGuidelines.pdf
- Katoh K, Standley DM. (2013) MAFFT multiple sequence alignment software version 7: Improvements in performance and usability. Molecular Biology and Evolution 30(4): 772–780. 10.1093/molbev/mst010 [DOI] [PMC free article] [PubMed] [Google Scholar]
- Kearse M, Moir R, Wilson A, Stones-Havas S, Cheung M, Sturrock S, Buxton S, Cooper A, Markowitz S, Duran C, Thierer T, Ashton B, Meintjes P, Drummond A. (2012) Geneious Basic: An integrated and extendable desktop software platform for the organization and analysis of sequence data. Bioinformatics 28(12): 1647–1649. 10.1093/bioinformatics/bts199 [DOI] [PMC free article] [PubMed] [Google Scholar]
- Monro AK. (2004) Three new species, and three new names in Pilea (Urticaceae) from New Guinea. Kew Bulletin 59(4): 573–579. 10.2307/4110914 [DOI] [Google Scholar]
- Monro AK. (2006) Revision of species-rich genera: A phylogenetic framework for the strategic revision of Pilea (Urticaceae) based on cpDNA, nrDNA, and morphology. American Journal of Botany 93(3): 426–441. 10.3732/ajb.93.3.426 [DOI] [PubMed] [Google Scholar]
- Monro AK, Wei YG, Chen CJ. (2012) Three new species of Pilea (Urticaceae) from limestone karst in China. PhytoKeys 19(0): 51–66. 10.3897/phytokeys.19.3968 [DOI] [PMC free article] [PubMed] [Google Scholar]
- Qu X, Moore MJ, Li D, Yi T. (2019) PGA: A software package for rapid, accurate, and flexible batch annotation of plastomes. Plant Methods 15(1): 50. 10.1186/s13007-019-0435-7 [DOI] [PMC free article] [PubMed] [Google Scholar]
- Shi L, Chen H, Jiang M, Wang L, Wu X, Huang L, Liu C. (2019) CPGAVAS2, an integrated plastome sequence annotator and analyzer. Nucleic Acids Research 47(W1): W65–W73. 10.1093/nar/gkz345 [DOI] [PMC free article] [PubMed]
- Wang WT. (2014) Two new species of Urticaceae from Tibet. Zhiwu Kexue Xuebao 32: 24–26. [Google Scholar]
- Wang WT. (2016) Notes on the genus Pilea (Urticaceae) of China. Bulletin of Botanical Research 36(4): 484–490. [Google Scholar]
- Yang F, Wang YH, Qiao D, Wang HC. (2018) Pileaweimingii (Urticaceae), a new species from Yunnan, southwest China. Annales Botanici Fennici 55(1–3): 99–103. 10.5735/085.055.0112 [DOI] [Google Scholar]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Supplementary Materials
Appendix S1
This dataset is made available under the Open Database License (http://opendatacommons.org/licenses/odbl/1.0/). The Open Database License (ODbL) is a license agreement intended to allow users to freely share, modify, and use this Dataset while maintaining this same freedom for others, provided that the original source and author(s) are credited.
Long-Fei Fu, Chi Xiong, Alexandre Monro, Qiang Fan, Zai-Xiong Chen, Fang Wen, Zi-Bing Xin, Yi-Gang Wei, Wen-Bo Liao
Data type
GenBank accession numbers.
Explanation note
Taxa and GenBank accession numbers of DNA sequences used in this study.