Skip to main content
NCBI home page
Nature Communications logoLink to Nature Communications
. 2020 Sep 8;11:4473. doi: 10.1038/s41467-020-18235-9

Synthesis of chiral anti-1,2-diamine derivatives through copper(I)-catalyzed asymmetric α-addition of ketimines to aldimines

Xu-Cheng Gan 1,2,#, Cheng-Yuan Zhang 2,#, Feng Zhong 2,#, Ping Tian 1,✉, Liang Yin 1,2,✉
PMCID: PMC7479099  PMID: 32901034

Abstract

Chiral 1,2-diamines serve as not only common structure units in bioactive molecules but also useful ligands for a range of catalytic asymmetric reactions. Here, we report a method to access anti-1,2-diamine derivatives. By means of the electron-withdrawing nature of 2- or 4-nitro-phenyl group, a copper(I)-catalyzed asymmetric α-addition of ketimines derived from trifluoroacetophenone and 2- or 4-NO2-benzylamines to aldimines is achieved, which affords a series of chiral anti-1,2-diamine derivatives in moderate to high yields with moderate to high diastereoselectivity and high to excellent enantioselectivity. Aromatic aldimines, heteroaromatic aldimines, and aliphatic aldimines serve as suitable substrates. The nitro group is demonstrated as a synthetical handle by several transformations, including a particularly interesting Fe(acac)3-catalyzed radical hydroamination with a trisubstituted olefin. Moreover, the aryl amine moiety obtained by the reduction of the nitro group serves as a synthetically versatile group, which leads to the generation of several functional groups by the powerful Sandmeyer reaction, such as -OH, -Br, -CF3, and -BPin.

Subject terms: Asymmetric catalysis, Asymmetric synthesis, Green chemistry, Synthetic chemistry methodology

Chiral 1,2-diamines are useful chemicals used as ligands in asymmetric catalysis. Here, the authors report a copper(I)-catalyzed asymmetric α-addition of ketimines derived from trifluoroacetophenone and 2- or 4-NO2-benzylamines to aldimines, affording a series of chiral anti-1,2-diamine derivatives.

Introduction

Chiral 1,2-diamines have been identified as one of the most important structural motifs in bioactive natural products and pharmaceutical compounds1–4. Moreover, they served as both powerful ligands in transition metal-catalyzed asymmetric reaction and efficient chiral organocatalysts5–8. Therefore, various methods have been developed for their asymmetric synthesis1–4. Reported synthetic methods could be divided into three types, transformations with preformed diamine skeleton, transformations with carbon–nitrogen bond formation, and transformations with carbon–carbon bond formation. In the third type, a carbon atom containing an N-based functional group, such as nitro9, isocyanide10–13, isothiocyanato14,15, or ketimine16 was usually employed as the pronucleophile in addition to aldimines. In the case of ketimine, a 2-azaallyl anion16 was generated upon the deprotonation with a base, which would exhibit two pathways toward electrophiles, α-addition and α′-addition (Fig. 1a).

Fig. 1. Prior arts and our work in the catalytic asymmetric reactions with 2-azaallyl anions.

Fig. 1

Open in a new tab

a Regioselectivity in the nucleophilic addition of 2-azaallyl anions. b Reported catalytic asymmetric α-addition by Hou and Wu. c Reported catalytic asymmetric α′-addition (umpolung addition) by Deng. d Our work: synthesis of 1,2-diamines through copper(I)-catalyzed α-addition.

Usually, a second functional group such as ester17–21, nitrile22,23, or phosphate18,24 was required to stabilize the 2-azaallyl anion (R1 = CO2R, CN, or P(O)(OR)2). Furthermore, the introduction of a strong electron-withdrawing group on the α-position of ketimine would lower pKa value of the α-protons and thus enable a facile proton-transfer α-addition to aldimines, which would produce chiral 1,2-diamine derivatives in the presence of a chiral catalyst. In 2008, Hou, Wu and co-workers disclosed an interesting catalytic asymmetric Mannich reaction of N-(diphenylmethylene)glycine methyl ester with high enantioselectivity17 (Fig. 1b). By changing the electronic property on the ligand (FOXAP), both syn- and anti-1,2-diamine derivatives were synthesized in high diastereoselectivity. Moreover, Zhao group uncovered a powerful biomimetic asymmetric Mannich reaction of tert-butyl glycine hydrochloride via carbonyl catalysis, which afforded chiral anti-1,2-diamine derivatives in excellent diastereo- and enantioselectivity21.

Except for stabilized 2-azaallyl anion, semi-stabilized 2-azaallyl anion (R1 = aryl) and nonstabilized 2-azaallyl anion (R1 = H or alkyl) were also employed as nucleophiles in the α-addition to aldimines16. As a breakthrough in this field, Kobayashi group disclosed a KOtBu-18-crown-6-catalyzed Mannich-type reaction of (9-fluorenylidene)aminoalkanes and Dpp-aldimines25. However, a catalytic asymmetric version afforded a chiral syn-1,2-diamine derivative in 74% ee. Although Reddy group developed a diastereoselective version by using Davis–Ellman’s imines in 2018 (ref. 26), a catalytic asymmetric reaction has rarely been achieved. In the same year, Malcolmson’s group reported a powerful reductive coupling of azadienes with aldimines and ketimines, which afforded anti-1,2-diamine derivatives in excellent diastereo- and enantioselectivities27. In this beautiful reaction, a catalytic amount of nonstabilized 2-azaallyl anions were generated by the reduction of azadienes with (Ph-BPE)CuH.

The α′-addition of 2-azaallyl anion is called as a umpolung addition of imine as imine usually serves as electrophile toward various nucleophiles28, which provides accesses to new structures and new substitution patterns29–39. In 2015, Deng group uncovered an admiring catalytic asymmetric umpolung reaction of ketimines derived from trifluoroacetophenone and 4-NO2-benzylamines and α,β-unsaturated aldehydes29 (Fig. 1c). In the presence of a powerful organocatalyst derived from cinchona alkaloid, the generated 2-azaallyl anions from ketimines via deprotonation favored α′-addition to α,β-unsaturated aldehydes (1,4-conjugate addition). However, α-addition of such 2-azaallyl anions has been much less achieved in asymmetric catalysis. In 2015, Shibasaki and Kumagai proposed a benzyl copper(I) species A, which reacted with aldimines to afford chiral 1,2-diarylethylenediamine derivatives through α-addtion13. Therefore, it is envisioned that a benzyl copper(I) species B will be generated through the deprotonation of the ketimine with a base in the presence of a copper(I) complex, which may form an equilibrium with another benzyl copper(I) species B′ (Fig. 1d). Species B will lead to α-addition, while species B′ will lead to α′-addition. Significant steric hindrances from both the bulky copper(I)–bisphosphine complex and the congested α′-position bearing Ph and CF3 exist in α′-addition, and thus α′-addition is disfavored. Obviously, α-addition of the benzyl copper(I) species to aldimines will produce chiral 1,2-diamine derivatives. Moreover, it is well known that the nitro group serves as a versatile functional group in organic synthesis40. By reducing the nitro group to amino group, Sandmeyer reaction41 will allow facile preparation of more chiral 1,2-diamines containing a variety of other functional groups.

Here, we show the catalytic asymmetric α-addition of ketimines derived from trifluoroacetophenone and 2- or 4-NO2-benzylamines to aldimines, which furnishes a series of anti-1,2-diamine derivatives in moderate-to-high yields with moderate-to-high diastereoselectivity and high-to-excellent enantioselectivity. The nitro group in the products is demonstrated as a synthetic handle to afford amine and nitrone. Moreover, the produced arylamine serves as an excellent substrate for synthetically powerful Sandmeyer reaction to afford arene, phenol, arylbromide, trifluoroarene, or arylboronate in good yield.

Results

Condition optimization

First of all, the reaction between ketimine 1a and N-Boc-aldimine 2a was performed in the presence of 5 mol % Cu(CH3CN)4PF6, 5 mol % (R)-BINAP, and 5 mol % Barton’s Base (Table 1, entry 1). The addition proceeded smoothly to afford product 3aa in 48% yield with 17% ee. By screening of commercially available bisphosphine ligands, (R,RP)-TANIAPHOS was found to be the best in term of enantioselectivity (entries 2–8). Lowering the reaction temperature to –30 °C resulted in 96% ee (entry 9). Other organic bases, such as TMG and Et3N, also worked very well to catalyze the reaction with higher yields and maintained enantioselectivity (entry 10-11). Mesitylcopper42-(R,RP)-TANIAPHOS was used to replace the combination of Cu(CH3CN)4PF6-(R,RP)-TANIAPHOS-organic base, which resulted in the same reaction efficiency (entry 12). Changing the solvent from THF to DME led to a slightly increased yield (entry 13). Other solvents (including noctane, toluene, mesitylene, PhCF3, and DCM) were also tested without any better results observed (for the details, see Supplementary Table 1). The conditions shown in entry 13 were selected as the optimized reaction conditions due to the easy manipulation with mesitylcopper and the highest yield. Without mesitylcopper complex, the reaction did not proceed at all at room temperature (entry 14). Except for N-Boc aldimine 2a, other aldimines derivated from benzaldehyde, such as N-Cbz aldimine, N-Ts aldimine, N-2-thiophenesulfonyl aldimine, and N-P(S)Ph2 aldimine were also evaluated under the reaction conditions showed in entry 13. However, no superior results were obtained (for the details, see Supplementary Table 2). Both N-Ts aldimine and N-2-thiophenesulfonyl aldimine afforded the corresponding products without asymmetric induction. The reaction with N-Cbz aldimine and N-P(S)Ph2 aldimine led to much worse yields and enantioselectivity.

Table 1.

Optimization of reaction conditionsa.

graphic file with name 41467_2020_18235_Figa_HTML.gif
Entry Ligand Base T Yieldb ee (%)c
1 (R)-BINAP Barton’s base RT 48 −17
2 (R)-Tol-BINAP Barton’s base RT 49 −52
3 (R)-SEGPHOS Barton’s base RT 50 −20
4 (R)-DTBM-SEGPHOS Barton’s base RT 43 −66
5 (R,R)-Ph-BPE Barton’s base RT 38 −21
6 (R,R)-QUINOXP* Barton’s base RT 55 −31
7 (R)-(S)-JOSIPHOS Barton’s base RT 32 0
8 (R,Rp)-TANIAPHOS Barton’s base RT 57 86
9 (R,Rp)-TANIAPHOS Barton’s base −30 61 96
10 (R,Rp)-TANIAPHOS TMG −30 65 96
11 (R,Rp)-TANIAPHOS Et3N −30 75 98
12d (R,Rp)-TANIAPHOS – −30 77 97
13d,e (R,Rp)-TANIAPHOS – −30 82 97
14f (R,Rp)-TANIAPHOS – RT – –
Open in a new tab

DME 1,2-dimethoxyethane, RT room temperature.

a1a: 0.1 mmol, 2a: 0.15 mmol.

bDetermined by 1H NMR analysis of reaction crude mixture using CH3NO2 as an internal standard.

cDetermined by chiral-stationary-phase HPLC analysis.

dIn total, 5 mol % mesitylcopper and 5 mol % ligand were used.

eDME was employed instead of THF.

fThe reaction was performed without mesitylcopper and ligand.

graphic file with name 41467_2020_18235_Figb_HTML.gif

Substrate scope

Under the optimized reaction conditions, the substrate scope of aldimines was investigated (Fig. 2). As for the aromatic aldimines containing a para-substituent, both electron-donating groups and electro-withdrawing groups were well tolerated with the corresponding products generated in 7/1 to >20/1 dr and 81% to 98% ee (3aa–3am). However, aromatic aldimines with electron-withdrawing groups afforded lower yields. Both the aromatic aldimines containing an ortho-substituent and the aromatic aldimines containing a meta-substituent were competent substrates too (3an–3aq). Moreover, both 1-naphthyl aldimine and 2-naphthyl aldimine were well applicable to the present reaction protocol (3ar–3as). The reactions of two heteroaromatic aldimines, containing 2-thienyl and N-Boc-3-indolyl, also worked very well (3at–3au). It should be mentioned that the diastereoselectivity was moderate in several cases (3ag, 3ao, and 3at).

Fig. 2. Substrate scope of aldimines 2a.

Fig. 2

Open in a new tab

Both aromatic aldimines and aliphatic aldimines are employed. a1a: 0.2 mmol, 2: 0.3 mmol. Isolated yield. Dr determined by 1H NMR analysis of the crude reaction mixture. Enantioselectivity determined by chiral-stationary-phase HPLC analysis. b4 equiv 2. cThe reaction is performed with 10 mol % mesitylcopper and 10 mol % (R,RP)-TANIAPHOS in THF at RT for 8 h.

Then, aliphatic aldimines were examined. Aldimines with a cycloalkyl substituent were found as satisfactory substrates too (3av–3aw). In the cases of α-branched aldimine (2x) and β-branched aldimine (2y), the reactions were performed in THF at room temperature in the presence of 10 mol % mesitylcopper and 10 mol % (R,RP)-TANIAPHOS. Products (3ax–3ay) were obtained in moderate yields with moderate diastereo- and high enantioselectivities. The diastereoselectivity in these cases was moderate possibly due to the smaller differences of both steric hindrance and electronic nature between an alkyl and the hydrogen atom. The absolute configurations of the two stereogenic carbon centers in 3ai were determined by X-ray analysis of its single crystals. The absolute configurations of other products were deduced by analogy.

A simple study of ketimines was performed, as shown in Fig. 3. In order to get better results, the reaction conditions (including reaction temperature, and solvent) were slightly changed. Generally speaking, lower reaction temperature favors higher enantioselectivity, while higher reaction temperature favors higher yield. In many cases, THF was a better solvent than DME, which led to higher enantioselectivity at higher reaction temperature than −30 °C. As shown in Fig. 3, as for 4-nitrobenzyl imines, a substituent, such as methyl, fluorine, and chlorine was successfully tolerated at the 2-positon (3ba, 3ca, and 3da). However, with the increasing of steric hindrance of the substituent, the diastereoselectivity decreased. Furthermore, a substituent, such as methyl, methoxyl, and thiophenyl, could be introduced at the 3-position with high diastereo- and enantioselectivities observed (3ea, 3fa, and 3ga). At last, 2-nitrobenzyl imine 1 h was investigated, which was transformed to product 3 ha in 75% yield with 4/1 dr and 91% ee. Similar reaction efficiency was observed in the reactions of imines 3i and 3j. It should be pointed out that the reactions of 2-nitrobenzyl imines proceeded in moderate diastereoselectivity. The absolute configurations of 3ba–3ja were assumed according to the stereo-structure of 3ai. Except for the nitro group, other electron-withdrawing groups, such as 4-COOMe, 4-CF3, 4-P(O)Ph2, 4-CN, and 4-SO2CF3 were also introduced into the ketimines. However, even at room temperature, the reaction with 4-COOMe-Ph, 4-CF3-Ph, 4-P(O)Ph2-Ph, and 4-CN-Ph proceeded in unsatisfactory results, indicating less efficient deprotonation process. The ketimine-bearing 4-SO2CF3 was a suitable substrate, which reacted with aldimine 2a to give the corresponding product in 53% yield with 91% ee (for the details, see Supplementary Table 3).

Fig. 3. Substrate scope of ketimines 1a.

Fig. 3

Open in a new tab

Ketimines derived from both 4-nitro-benzylamines and 2-nitro-benzylamines are employed. a1b-1j: 0.2 mmol, 2a: 0.3 mmol. Isolated yield. Dr determined by 1H NMR analysis of the crude reaction mixture. Enantioselectivity determined by chiral-stationary-phase HPLC analysis.

Gram-scale reaction and transformation

A gram-scale preparation of 3aa was achieved successfully with 2 mol % mesitylcopper and 2 mol % (R,RP)-TANIAPHOS at −20 °C as shown in Fig. 4, which afforded 1.15 gram 3aa in 75% yield with >20/1 dr and 96% ee. The transformation of the nitro group to the nitrone group was easily achieved without touching both the imine moiety and the N-Boc moiety. Nitrone 4 was generated in 77% yield by following a reported reaction procedure43, which potentially might serve as a versatile intermediate in organic synthesis. The cleavage of both C = N moiety and N-Boc moiety was carried out in 12 M HCl in MeOH to give the desired anti-1,2-diamine, which was protected with TsCl to deliver 5 in 81% yield for two steps. The nitro group in 5 was easily reduced to an amine group (6) in 98% yield in the presence of Pd/C under 1 atm H2. Interestingly, 5 underwent a Fe(acac)3-catalyzed radical hydroamination with 3-methylbut-3-en-1-ol to furnish α-tertiary amine 7 in 59% yield44.

Fig. 4. Gram-scale reaction and transformations of the nitro group.

Fig. 4

Open in a new tab

a Gram-scale reaction. b Transformation of the nitro group to the nitrone group. Zn (6.0 equiv), HOAc (12.0 equiv), EtOH, 0 °C to RT. c Removal of the ketimine moiety and protection of the newly generated free amine moiety. (1) 12 M HCl, MeOH, RT; (2) TsCl, Et3N, DMAP, DCM, RT. d Reduction of the nitro group to the amine group. Pd/C, H2 (1 atm), MeOH, RT. e Radical hydroamination. (1) 3-methylbut-3-en-1-ol (3.0 equiv), Fe(acac)3 (30 mol %), PhSiH3, EtOH, 60 °C; (2) Zn, HCl, 60 °C.

Transformations of aromatic amine 6 were performed by means of synthetically powerful Sandmeyer reaction41 (Fig. 5). The removal of the NH2 group was carried out by means of the traditional Sandmeyer reaction conditions, which delivered 1,2-diaryldiamine 8 in 80% yield. The conversion of arylamine 6 to phenol 9 was achieved in 73% yield. The preparation of arylbromide 10 was also accomplished in 75% yield. The deaminative trifluoromethylation was carried out to give 11 in 54% yield by following a newly reported procedure45. The conversion of arylamine 6 to arylboronate 12 was achieved in 66% yield46. More interestingly, by following a powerful reaction47, aryl azide 13 was synthesized from 6 in 93% yield. Evidently, compounds 9, 10, 12, and 13 would allow further easy structure elaboration.

Fig. 5. Synthetic applications.

Fig. 5

Open in a new tab

a Removal of the amine moiety. NaNO2, HCl, H3PO2, H2O, 0 °C. b transformation of the arylamine to phenol. NaNO2, H2SO4, H2O, 0 to 100 °C. c transformation of the arylamine to arylbromide. CuBr2 (1 mol %), tBuONO, TsOH, TBAB, MeCN, RT. d transformation of the arylamine to trifluoromethyl arene. tBuONO, HCl, AgCF3, MeCN, −40 °C. e Transformation of the arylamine to arylBPin. tBuONO, B2Pin2, MeCN, 80 °C. f Transformation of the arylamine to aryl azide. KHCO3, FSO2N3, MTBE/DMF/H2O, RT.

Discussion

In conclusion, we developed a copper(I)-catalyzed asymmetric α-addition of ketimines derived from trifluoroacetophenone and 2- or 4-NO2-benzylamines to N-Boc-aldimines. A series of chiral anti-1,2-diamine derivatives were generated in moderate-to-high yields with moderate-to-high diastereoselectivity and high-to-excellent enantioselectivity. The reaction enjoyed a broad substrate scope of aldimines. The nitro group in the products served as a synthetic handle to facilitate further structure elaboration. Furthermore, the arylamine generated by the reduction of the nitro group was an excellent substrate for the synthetically powerful Sandmeyer reaction, which was transformed to arene, phenol, arylbromide, trifluoroarene, and arylboronate. More interestingly, the preparation of aryl azide was efficiently accomplished by means of a powerful reaction protocol. The capture of the benzyl copper(I) species and its further application in asymmetric catalysis are currently ongoing in our laboratory.

Methods

A general procedure for aromatic aldimines

A dried 25-mL schlenk tube equipped with a magnetic stirring bar was charged with mesitylcopper (1.8 mg, 0.01 mmol, 5.0 mol %) and (R,Rp)-TANIAPHOS (6.8 mg, 0.01 mmol, 5.0 mol %) in a glove box under Ar atmosphere. Anhydrous DME (2 mL) was added via a syringe. The mixture was stirred for 20 min at room temperature to give a yellow solution. The reaction mixture was cooled to −30 °C, and benzyl imine (0. 2 mmol, 1.0 equiv) and N-Boc-aldimine (0.3 mmol, 1.5 equiv) were added. The resulting reaction mixture was stirred at −30 °C for 18 h. Then, the reaction mixture was purified by silica gel column chromatography (petroleum ether/ethyl acetate = 12/1) to give the desired product.

A general procedure for aliphatic aldimines

A dried 25-mL schlenk tube equipped with a magnetic stirring bar was charged with mesitylcopper (3.6 mg, 0.02 mmol, 10 mol %) and (R,Rp)-TANIAPHOS (13.6 mg, 0.02 mmol, 10 mol %) in a glove box under Ar atmosphere. Anhydrous THF (2 mL) was added via a syringe. The mixture was stirred for 20 min at room temperature to give a yellow solution. Then benzyl imine (0.2 mmol, 1.0 equiv) and N-Boc-aldimine (0.8 mmol, 4.0 equiv) were added. The resulting reaction mixture was stirred at room temperature for 8 h. Then, the reaction mixture was purified by silica gel column chromatography (petroleum ether/ethyl acetate = 12/1) to give the desired product.

Supplementary information

Supplementary Information (11.1MB, pdf)

Acknowledgements

We gratefully acknowledge the financial support from the National Natural Science Foundation of China (Nos. 21672235, 21871287, and 21922114), the Strategic Priority Research Program of the Chinese Academy of Sciences (No. XDB20000000), the Shanghai Municipal Education Commission (2019-01-07-00-10-E00072), CAS Key Laboratory of Synthetic Chemistry of Natural Substances, and Shanghai Institute of Organic Chemistry.

Author contributions

L.Y. and P.T. conceived and designed the study. X.C.G. and C.Y.Z. performed the synthetic experiments and analyzed the data for all new compounds. L.Y. wrote the paper. C.Y.Z. and F.Z. did the required revisions.

Data availability

The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition number CCDC 1945086 (3ai) [www.ccdc.cam.ac.uk/data_request/cif]. The data supporting the findings of this study are available within the article and its Supplementary Information file. Any further relevant data are available from the authors on request.

Competing interests

The authors declare no competing interests.

Footnotes

Peer review information Nature Communications thanks the anonymous reviewer(s) for their contribution to the peer review of this work.

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

These authors contributed equally: Xu-Cheng Gan, Cheng-Yuan Zhang, Feng Zhong.

Contributor Information

Ping Tian, Email: tianping@shutcm.edu.cn.

Liang Yin, Email: liangyin@sioc.ac.cn.

Supplementary information

Supplementary information is available for this paper at 10.1038/s41467-020-18235-9.

References

  • 1.Lucet D, Le Gall T, Mioskowski C. The chemistry of vicinal diamines. Angew. Chem. Int. Ed. 1998;37:2580–2627. doi: 10.1002/(SICI)1521-3773(19981016)37:19<2580::AID-ANIE2580>3.0.CO;2-L. [DOI] [PubMed] [Google Scholar]
  • 2.Kotti SRSS, Timmons C, Li G. Vicinal diamino functionalities as privileged structural elements in biologically active compounds and exploitation of their synthetic chemistry. Chem. Biol. Drug Des. 2006;67:101–114. doi: 10.1111/j.1747-0285.2006.00347.x. [DOI] [PubMed] [Google Scholar]
  • 3.Lin G-Q, Xu M-H, Zhong Y-W, Sun X-W. An advance on exploring N-tert-butanesulfinyl imines in asymmetric synthesis of chiral amines. Acc. Chem. Res. 2008;41:831–840. doi: 10.1021/ar7002623. [DOI] [PubMed] [Google Scholar]
  • 4.Zhu Y, Cornwall RG, Du H, Zhao B, Shi Y. Catalytic diamination of olefins via N–N bond activation. Acc. Chem. Res. 2014;47:3665–3678. doi: 10.1021/ar500344t. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 5.Gladiali S, Alberico E. Asymmetric transfer hydrogenation: chiral ligands and applications. Chem. Soc. Rev. 2006;35:226–236. doi: 10.1039/b513396c. [DOI] [PubMed] [Google Scholar]
  • 6.Ikariya T, Blacker AJ. Asymmetric transfer hydrogenation of ketones with bifunctional transition metal-based molecular catalysts. Acc. Chem. Res. 2007;40:1300–1308. doi: 10.1021/ar700134q. [DOI] [PubMed] [Google Scholar]
  • 7.Kizirian J-C. Chiral tertiary diamines in asymmetric synthesis. Chem. Rev. 2008;108:140–205. doi: 10.1021/cr040107v. [DOI] [PubMed] [Google Scholar]
  • 8.Zhang L, Fu N, Luo S. Pushing the limits of aminocatalysis: enantioselective transformations of α-branched β-ketocarbonyls and vinyl ketones by chiral primary amines. Acc. Chem. Res. 2015;48:986–997. doi: 10.1021/acs.accounts.5b00028. [DOI] [PubMed] [Google Scholar]
  • 9.Noble A, Anderson JC. Nitro-Mannich reaction. Chem. Rev. 2013;113:2887–2939. doi: 10.1021/cr300272t. [DOI] [PubMed] [Google Scholar]
  • 10.Nakamura S, et al. Enantioselective synthesis of imidazolines with quaternary stereocenters by organocatalytic reaction of N-(heteroarenesulfonyl)imines with isocyanoacetates. Org. Lett. 2012;14:2960–2963. doi: 10.1021/ol301256q. [DOI] [PubMed] [Google Scholar]
  • 11.Ortín I, Dixon DJ. Direct catalytic enantio- and diastereoselective Mannich reaction of isocyanoacetates and ketimines. Angew. Chem. Int. Ed. 2014;53:3462–3465. doi: 10.1002/anie.201309719. [DOI] [PubMed] [Google Scholar]
  • 12.Hayashi M, et al. Direct asymmetric Mannich-type reaction of α-isocyanoacetates with ketimines using cinchona alkaloid/copper(II) catalysts. Angew. Chem. Int. Ed. 2014;53:8411–8415. doi: 10.1002/anie.201404629. [DOI] [PubMed] [Google Scholar]
  • 13.Tamura, K., Kumagai, N. & Shibasaki, M. Direct catalytic asymmetric Mannich-type reaction of benzyl isocyanide: stereoselective synthesis of 1,2-diarylethylenediamines. Eur. J. Org. Chem.2015, 3026–3031 (2015).
  • 14.Lu G, Yoshino T, Morimoto H, Matsunaga S, Shibasaki M. Stereodivergent direct catalytic asymmetric Mannich-type reactions of α-isothiocyanato ester with ketimines. Angew. Chem. Int. Ed. 2011;50:4382–4385. doi: 10.1002/anie.201101034. [DOI] [PubMed] [Google Scholar]
  • 15.Kato S, Yoshino T, Shibasaki M, Kanai M, Matsunaga S. Catalytic asymmetric synthesis of spirooxindoles by a Mannich-type reaction of isothiocyanato oxindoles. Angew. Chem. Int. Ed. 2012;51:7007–7010. doi: 10.1002/anie.201203005. [DOI] [PubMed] [Google Scholar]
  • 16.Tang S, Zhang X, Sun J, Niu D, Chruma JJ. 2-Azaallyl anions, 2-azaallyl cations, 2-azaallyl radicals, and azomethine ylides. Chem. Rev. 2018;118:10393–10457. doi: 10.1021/acs.chemrev.8b00349. [DOI] [PubMed] [Google Scholar]
  • 17.Yan X-X, et al. Highly diastereoselective switchable enantioselective Mannich reaction of glycine derivatives with imines. J. Am. Chem. Soc. 2008;130:14362–14363. doi: 10.1021/ja804527r. [DOI] [PubMed] [Google Scholar]
  • 18.Kobayashi S, Yazaki R, Seki K, Yamashita Y. The fluorenone imines of glycine esters and their phosphonic acid analogues. Angew. Chem. Int. Ed. 2008;47:5613–5615. doi: 10.1002/anie.200801322. [DOI] [PubMed] [Google Scholar]
  • 19.Bandar JS, Lambert TH. Cyclopropenimine-catalyzed enantioselective Mannich reactions of tert-butyl glycinates with N-Boc-imines. J. Am. Chem. Soc. 2013;135:11799–11802. doi: 10.1021/ja407277a. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 20.Kano T, Kobayashi R, Maruoka K. Versatile in situ generated N-Boc-imines: application to phase-transfer-catalyzed asymmetric Mannich-type reactions. Angew. Chem. Int. Ed. 2015;54:8471–8474. doi: 10.1002/anie.201502215. [DOI] [PubMed] [Google Scholar]
  • 21.Chen J, et al. Carbonyl catalysis enables a biomimetic asymmetric Mannich reaction. Science. 2018;360:1438–1442. doi: 10.1126/science.aat4210. [DOI] [PubMed] [Google Scholar]
  • 22.Lin S, Kawato Y, Kumagai N, Shibasaki M. Catalytic asymmetric Mannich-type reaction of N-alkylidene-α-aminoacetonitrile with ketimines. Angew. Chem. Int. Ed. 2015;54:5183–5186. doi: 10.1002/anie.201412377. [DOI] [PubMed] [Google Scholar]
  • 23.Kondo M, Nishi T, Hatanaka T, Funahashi Y, Nakamura S. Catalytic enantioselective reaction of α-aminoacetonitriles using chiral bis(imidazoline) palladium catalysts. Angew. Chem. Int. Ed. 2015;54:8198–8202. doi: 10.1002/anie.201503098. [DOI] [PubMed] [Google Scholar]
  • 24.Momo RD, Fini F, Bernardi L, Ricci A. Asymmetric synthesis of α,β-diaminophosphonic acid derivatives with a catalytic enantioselective Mannich reaction. Adv. Synth. Catal. 2009;351:2283–2287. [Google Scholar]
  • 25.Chen Y-J, Seki K, Yamashita Y, Kobayashi S. Catalytic carbon−carbon bond-forming reactions of aminoalkane derivatives with imines. J. Am. Chem. Soc. 2010;132:3244–3245. doi: 10.1021/ja909909q. [DOI] [PubMed] [Google Scholar]
  • 26.Reddy LR, et al. Umpolung synthesis of vicinal diamines: diastereoselective addition of 2-azaallyl anions to Davis–Ellman’s imines. Org. Lett. 2018;20:5423–5426. doi: 10.1021/acs.orglett.8b02331. [DOI] [PubMed] [Google Scholar]
  • 27.Shao X, Li K, Malcolmson SJ. Enantioselective synthesis of anti-1,2-diamines by Cu-catalyzed reductive couplings of azadienes with aldimines and ketimines. J. Am. Chem. Soc. 2018;140:7083–7087. doi: 10.1021/jacs.8b04750. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 28.Waser M, Novacek J. An organocatalytic biomimetic strategy paves the way for the asymmetric umpolung of imines. Angew. Chem. Int. Ed. 2015;54:14228–14231. doi: 10.1002/anie.201506872. [DOI] [PubMed] [Google Scholar]
  • 29.Wu Y, Hu L, Li Z, Deng L. Catalytic asymmetric umpolung reactions of imines. Nature. 2015;523:445–450. doi: 10.1038/nature14617. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 30.Hu L, Wu Y, Li Z, Deng L. Catalytic asymmetric synthesis of chiral γ-amino ketones via umpolung reactions of imines. J. Am. Chem. Soc. 2016;138:15817–15820. doi: 10.1021/jacs.6b09754. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 31.Hu B, et al. Origin of and a solution for uneven efficiency by cinchona alkaloid-derived, pseudoenantiomeric catalysts for asymmetric reactions. J. Am. Chem. Soc. 2018;140:13913–13920. doi: 10.1021/jacs.8b09010. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 32.Hu B, Deng L. Catalytic asymmetric synthesis of trifluoromethylated γ-amino acids through the umpolung addition of trifluoromethyl imines to carboxylic acid derivatives. Angew. Chem. Int. Ed. 2018;57:2233–2237. doi: 10.1002/anie.201710915. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 33.Li Z, Hu B, Wu Y, Fei C, Deng L. Control of chemoselectivity in asymmetric tandem reactions: direct synthesis of chiral amines bearing nonadjacent stereocenters. Proc. Nat. Acad. Sci. USA. 2018;115:1730–1735. doi: 10.1073/pnas.1718474115. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 34.Hu B, Deng L. Direct catalytic asymmetric synthesis of trifluoromethylated γ-amino esters/lactones via umpolung strategy. J. Org. Chem. 2019;84:994–1005. doi: 10.1021/acs.joc.8b02893. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 35.Guo C, Song J, Gong L-Z. Biomimetic asymmetric 1,3-dioplar cycloaddition: amino acid precursors in biosynthesis serve as latent azomethine ylides. Org. Lett. 2013;15:2676–2679. doi: 10.1021/ol400983j. [DOI] [PubMed] [Google Scholar]
  • 36.Tian L, Hu X-Q, Li Y-H, Xu P-F. Organocatalytic asymmetric multicomponent cascade reaction via 1,3-proton shift and [3+2] cycloaddition: an efficient strategy for the synthesis of oxindole derivatives. Chem. Commun. 2013;49:7213–7215. doi: 10.1039/c3cc43755h. [DOI] [PubMed] [Google Scholar]
  • 37.Yoshida Y, Mino T, Sakamoto M. Organocatalytic highly regio- and enantioselective umpolung Michael addition reaction of α-imino esters. Chem. Eur. J. 2017;23:12749–12753. doi: 10.1002/chem.201703479. [DOI] [PubMed] [Google Scholar]
  • 38.Yoshida Y, Moriya Y, Mino T, Sakamoto M. Regio-and enantioselective synthesis of α-amino-δ-ketoesters through catalytic umpolung reaction of α-iminoesters with enones. Adv. Synth. Catal. 2018;360:4142–4146. [Google Scholar]
  • 39.Yoshida Y, Omori K, Hiroshige T, Mino T, Sakamoto M. Chemoselective catalytic asymmetric synthesis of functionalized aminals through the umpolung organocascade reaction of α-imino amides. Chem. Asian J. 2019;14:2737–2743. doi: 10.1002/asia.201900764. [DOI] [PubMed] [Google Scholar]
  • 40.Ono, N. The Nitro group in Organic Synthesis (Wiley-VCH, 2001).
  • 41.Mo F, Qiu D, Zhang Y, Wang J. Renaissance of Sandmeyer-type reactions: conversion of aromatic C–N bonds into C–X bonds (X = B, Sn, P, or CF3) Acc. Chem. Res. 2018;51:496–506. doi: 10.1021/acs.accounts.7b00566. [DOI] [PubMed] [Google Scholar]
  • 42.Stollenz M, Meyer F. Mesitylcopper—a powerful tool in synthetic chemistry. Organometallics. 2012;31:7708–7727. [Google Scholar]
  • 43.Matias AC, Biazolla G, Cerchiaro G, Keppler AF. α-Aryl-N-aryl nitrones: synthesis and screening of a new scaffold for cellular protection against an oxidative toxic stimulus. Bioorg. Med. Chem. 2016;24:232––2239. doi: 10.1016/j.bmc.2015.12.007. [DOI] [PubMed] [Google Scholar]
  • 44.Gui J, et al. Practical olefin hydroamination with nitroarenes. Science. 2015;348:886–891. doi: 10.1126/science.aab0245. [DOI] [PubMed] [Google Scholar]
  • 45.Wang X, et al. Silver-mediated trifluoromethylation of aryldiazonium salts: conversion of amino group into trifluoromethyl group. J. Am. Chem. Soc. 2013;135:10330–10333. doi: 10.1021/ja4056239. [DOI] [PubMed] [Google Scholar]
  • 46.Qiu D, et al. Synthesis of pinacol arylboronates from aromatic amines: a metal-free transformation. J. Org. Chem. 2013;78:1923–1933. doi: 10.1021/jo3018878. [DOI] [PubMed] [Google Scholar]
  • 47.Meng G, et al. Modular click chemistry libraries for functional screens using a diazotizing reagent. Nature. 2019;574:86–89. doi: 10.1038/s41586-019-1589-1. [DOI] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Information (11.1MB, pdf)

Data Availability Statement

The X-ray crystallographic coordinates for structures reported in this study have been deposited at the Cambridge Crystallographic Data Centre (CCDC), under deposition number CCDC 1945086 (3ai) [www.ccdc.cam.ac.uk/data_request/cif]. The data supporting the findings of this study are available within the article and its Supplementary Information file. Any further relevant data are available from the authors on request.

Articles from Nature Communications are provided here courtesy of Nature Publishing Group

RESOURCES