Skip to main content
F1000Research logoLink to F1000Research
. 2023 Oct 18;12:1356. [Version 1] doi: 10.12688/f1000research.140748.1

Effect of extrusion cooking on the chemical and nutritional properties of instant flours: a review

Remigio Yamid Pismag 1,a, María Paula Polo 1, José Luis Hoyos 1, Jesús Eduardo Bravo 1, Diego Fernando Roa 1
PMCID: PMC10905115  PMID: 38434661

Abstract

Satisfying the nutritional requirements of consumers has made food industries focus on the development of safe, innocuous, easy-to-prepare products with high nutritional quality through efficient processing technologies. Extrusion cooking has emerged as a prominent technology associated with the nutritional and functional attributes of food products. This review aims to establish a theoretical framework concerning the influence of extrusion parameters on the functional and nutritional properties of precooked or instant flours, both as end-products and ingredients. It highlights the pivotal role of process parameters within the extruder, including temperature, screw speed, and raw materials moisture content, among others, and elucidates their correlation with the modifications observed in the structural composition of these materials. Such modifications subsequently induce notable changes in the ultimate characteristics of the food product. Detailed insights into these transformations are provided within the subsequent sections, emphasizing their associations with critical phenomena such as nutrient availability, starch gelatinization, protein denaturation, enhanced in vitro digestibility, reduction in the content of antinutritional factors (ANFs), and the occurrence of Maillard reactions during specific processing stages. Drawing upon insights from available literature, it is concluded that these effects represent key attributes intertwined with the nutritional properties of the end-product during the production of instant flours.

Keywords: precooking, instant powders, instant preparation, instant consumption

Introduction

The market for precooked flours has witnessed significant growth both in developed and developing countries, providing opportunities for industries engaged in offering these products ( Allied, 2020). Developing nations, particularly, seek viable alternatives that facilitate the processing of region-specific raw materials using cost-effective and highly efficient techniques. The aim is to enable the development of instant preparation foods that effectively cater to the nutritional needs of the population ( Ali, Singh, & Sharma, 2016; Mouquet, Salvignol, Van Hoan, Monvois, & Trèche, 2003; Onyeoziri, Torres, Hamaker, Taylor, & Kock, 2021; Sebio & Chang, 2000). Currently, consumers are increasingly aware of their food consumption, and the ingredients employed in their formulation. The response of the food industry has been offering secure and nutritionally superior products while employing processing technologies that ensure efficiency and productivity ( Akande et al., 2017; Sandrin et al., 2018). In this context, instant flours have gained prominence as indispensable products or ingredients that contribute to the development of foods with versatile nutritional, functional, and textural properties. Instant flours, often referred to as pregelatinized flours, undergo hydro-thermal modification processes to attain starch gelatinization in the raw materials ( Sebio & Chang, 2000). Pregelatinized flours primarily are made of starch-rich raw materials, such as cereals, tubers, and selected fruits. However, it is vital to acknowledge that plant-based flours encompass additional constituents besides starch, including proteins, fibers, lipids, and bioactive compounds ( Akande et al., 2017; Espinosa et al., 2021). Hence, the presence of these constituents must be considered during their processing, due to their influence on the physical, chemical, nutritional, and functional properties of the processed flours ( Transparency, 2019).

Extrusion parameters to produce instant flours

Extrusion is a widely used technique in the creation of instant preparation foods such as beverages, porridges, infant foods, and desserts. Additionally, the raw materials employed in this process encompass a wide range, including cereal flours, legumes, fruits, tubers, and customized blends (see Table 1). The common raw materials used for producing precooked flours are rice, wheat, and maize. They have priority due to their wide availability and ease of being processed on an industrial scale. ( Transparency, 2019). Extrusion induces starch modification through the process of gelatinization ( Heredia et al., 2019). However, it’s common to employ additional processes such as germination and enzymatic hydrolysis for starch modifications ( Tovar et al., 2017; Pismag et al., 2023). These supplementary procedures contribute to the creation of distinct functional properties in instant preparation products, with the objective of achieving effortless solubility and optimal water retention ( Sandrin et al., 2018; Espinosa et al., 2021). However, ensuring solubility and suspension formation may not be enough, it is essential to consider the target audience when developing instant foods. In the pursuit of nutritional adequacy, the inclusion of legume-derived proteins or defatted raw materials is put forward by certain researchers ( Espinosa et al., 2021). In some cases, animal-based proteins, such as dairy proteins, have also been explored to achieve balanced nutritional profiles ( Heredia et al., 2019).

Table 1. Operating conditions for obtaining instant preparation flours.

Product Ingredient Extrusion conditions Reference
Temperature (°C) Moisture (%) Speed screw (rpm) Die (mm)
Single screw extruder
Extruded flour Whole quinoa flour and sprouted quinoa flour (96-115-111 – 100) 20-30 - ( Tovar, et al., 2017)
Instant porridge flour Chia seed and cassava flour blend (50-150-250) 10-15-20 100 10 ( Otondi et al., 2020)
Instant beverage extruded flour Green banana flour (20-30-40-50) 15 600, 800, 1000 4.5 ( Giraldo et al., 2019)
Instant porridge flour Millet flour 120 30-32 700 6 ( Onyeoziri et al., 2021)
Instant beverage flour, porridge and desserts Defatted sesame seeds 50-170 50-240 ( Ruiz et al., 2022)
Instant flour QPM corn flour (50-60-70) – (80-90-100) 28 30-80 ( Reyes et al., 2003)
Twin screw extruder
Extruded flours Quinoa flour (80-120-80) – (80-140-80) – (80-160-80) – (80 – 180-80) 25 480 ( Song et al., 2020)
Infant food Quinoa flour, millet flour (190) 18 260 ( Dong et al., 2021)
Infant foods Quinoa flour, amaranth flour and Andean potato flour (45 – 175 – 180) - 1500 ( Jiménez et al., 2020)
Instant flour Whey protein concentrate and rice flour 120-180 17-23 225-375 4 ( Heredia et al., 2019)
Instant porridge flour Amaranth, bean, and corn flours (60-130-130) - (60-130-170) 14-20 ( Akande et al., 2017)
Instant infant-food flour Corn and mung bean flour (40-70-100-108) – (40-70-100-192) 12,6 – 19,4 349-601 1,5 ( Ali et al., 2016)
Instant porridge flour Broken rice and cowpea flour 100-140 15-25 ( Nahemiah et al., 2016)
Instant flour Amaranth grain (90-110-120) – (130-150-160) 12-16 240 – 300 4 ( Atukuri et al., 2019)
Instant beverage flour Chickpea flour modified with α-amylase and alcalase 150 22,5 580 ( Silvestre et al., 2021)
Instant infant-food flour Soy-rice mixed flour 35-45-55-125-140-150-135-120 14 3,5 ( Mayachiew et al., 2015)
Cold-hot beverage instant flour Chickpea, corn and sorghum flour 50-80-100-120-150 20-24 317 ( Wang et al., 2019)

Table 1 provides an overview of instant preparation food types obtained through extrusion. It outlines key process conditions that significantly influence product characteristics. Parameters less frequently discussed in the literature encompass extrusion temperature, material moisture content, and screw speed. Additionally, less extensively studied factors, including die opening, feed rate, and the composition ratios of raw material mixtures, warrant further investigation. Notably, both single-screw and twin-screw extruders are employed in processing these raw materials, showcasing the versatility, and expanded horizons of extrusion-based techniques for innovative food development.

Chemical and nutritional properties

Extrusion cooking is a sequential and staged process that allows for progressive modification of the materials fed into the extruder. The raw materials used in the production of precooked or instant flours has a significant amount of starch (from cereal processing), high protein content (from legume processing) or it is also possible fiber content (mixed with cereal bran) ( Ali et al., 2016; Akande et al., 2017; Kaur et al., 2019; Otondi et al., 2020). Moreover, these raw materials exhibit a potential complementary component such as lipids, vitamins, minerals and micronutrients ( Ali et al., 2016).

Understanding the behavior of main components during extrusion cooking is essential to predict the characteristics of the final products. The extent of modification or structural changes in these components depends on the thermo-mechanical conditions regulated or adjusted through process parameters in the extrusion equipment ( Ali et al., 2016; Nahemiah et al., 2018). Consequently, the resulting characteristics of the products can vary significantly, leading to desirable attributes such as starch gelatinization, protein denaturation, increasing the in vitro digestion, enhanced nutrient availability (including sugars, polypeptides, phenolic compounds, and vitamins), increasing the soluble dietary fiber and reducing the level of antinutritional factors ( Chulaluck et al., 2008; Otondi et al., 2020). Conversely, some papers describe the occurrence of Maillard reactions promoting a reduction in the protein digestibility as same as decreasing the content of thermolabile compounds like vitamins and phenolic compounds ( Alam & Aslam, 2020; Offiah, Kontogiorgos, & Falade, 2019; Singh, Gamlath, & Wakeling, 2007). This section specifically focuses on elucidating the influence of process parameter modifications on the chemical and nutritional properties of instant preparation flours.

Free sugars

Extrusion cooking promotes the formation of low molecules weight from the starches. The main phenomena is called gelatinization, which is a particular process in extrusion that occurs at low moisture contents (12–45%), and involves the starch granule swelling, the leaching of amylose fractions and low molecular weight polysaccharides is also promoted. However, as thermo-mechanical conditions become more aggressive, fusion, depolymerization, and dextrinization of starches are induced ( Dalbhagat, Mahato, & Mishra, 2019; Yadav, Dalbhagat, & Mishra, 2022). Both amylose and amylopectin are fully exposed to the mechanical effect of the screws, leading to the production of low molecular weight structures, including the generation of sugars ( Singh, Gamlath, & Wakeling, 2007).

Table 2 demonstrates that the production of free sugars can occur during the extrusion process. High-temperature conditions, elevated moisture contents, and increased screw speeds contribute to significant levels of free sugar production in flours. Mild or low extrusion conditions, characterized by low temperature profiles, low moisture content, and high screw speeds, do not induce structural changes in starches, as reported by ( Martínez, Calviño, Rosell, & Gómez, 2014b; Martínez, Rosell, & Gómez, 2014a). Conversely, reversing these conditions during extrusion facilitates structural modifications in starches, leading to increased availability of free sugars in the extruded products ( Cheftel, 1986). This is relevant in legume extrusion, where the structural modification of oligosaccharides, such as raffinose, results in the increased production of reducing and non-reducing sugars ( Chauhan & Bains, 1988; Pham & Del Rosario, 1984). Controlling sugar levels during the extrusion process is crucial for ensuring the nutritional and sensory quality of extruded products ( Yadav et al., 2022). The production of sugars must be regulated to prevent adverse effects on protein digestibility during extrusion processes, unless fermentation is desired ( Singh et al., 2007).

Table 2. Effect of extrusion parameters on free sugars.

Raw material Extrusion conditions Barrel temperature Moisture Screw speed Reference
Wheat flour Moisture 3,6-21,8% + + - ( Martínez et al., 2014a)
Rice flour Moisture 17–30%
Temperature 110–140°C
+ + ( Martínez et al., 2014a)
Rice and legume flour Temperature 60–95°C + + ( Chauhan & Bains, 1988)
White bean and green bean flour Moisture 30-45%
Temperature 93-132°C
Screw speed 100-200 rpm
+ + + ( Pham & Del Rosario, 1984)

(+) Positive effect of process parameter on product parameter, (-) Negative effect of process parameter on product parameter.

Protein solubility

Protein is a representative fraction of cereal or legume flours, which suffer modification depending on the extrusion process conditions. During extrusion the hydrothermal and mechanical conditions cause denaturation and aggregation of proteins, leading to reduced solubility ( Silvestre, Espinosa, Heredia, & Pérez, 2020). The treatment of proteins at high temperatures and high moisture contents, unfold their quaternary structures and become part of the melted material. Subsequently, these modified proteins polymerize, cross-link, and reorient themselves, forming longer and fibrous structures. This mechanism is particularly noteworthy in obtaining textured proteins. Most of the extrusion processes reported in Table 3 demonstrate that protein solubility tends to decrease with increasing temperature. This is likely due to the thermal effect inside the extruder, which promotes cross-linking of shorter protein units ( Pelembe, Erasmus, & Taylor, 2002).

Table 3. Effect of extrusion parameters on soluble protein content.

Raw material Extrusion conditions Barrel temperature Moisture Screw speed Reference
Soybean meal Moisture 15 to 27%
Temperature 110 to 150°C
Screw speed 300 rpm
- - ( Singh, 2021)
Chickpea flour Moisture 15 to 22%
Temperature 143 to 150°C
Screw speed 450 to 700 rpm
+ - + ( Silvestre et al., 2020)
Canola flour Moisture 24, 30, 36% - ( Zhang et al., 2017)
Sorghum and cowpea flour blend Moisture 200 g/Kg
Temperature 130 to 165°C
Screw speed 200 rpm
+ ( Pelembe et al., 2002)
Lentil flour Moisture 18%
Temperature 135 to 175°C
Screw speed 500 rpm
- ( Li & Lee, 2000)
Wheat flour Moisture 30%
Temperature 60 to 160°C
Screw speed 200 rpm
- ( Li & Lee, 1997)

However, some authors report an increase in protein solubility associated with higher barrel temperatures ( Silvestre et al., 2020; Zhang et al., 2017). This may be attributed to the breakdown of protein aggregates at high temperatures ( Singh, 2021). Comparing the reports of Singh (2021) and Silvestre et al., (2020) where the maximum temperature and moisture content are similar, the screw speed is the determining factor for increased nitrogen solubility. The mechanical effect of this parameter is rarely reported, but it may contribute to the breakdown of protein aggregates, thereby increasing protein solubility. According to Table 3, solubility losses are evident with increasing moisture content ( Zhang et al., 2017).

According to Zhang et al. (2017), the molecular weight distribution of canola proteins undergoes redistribution after the extrusion process, resulting in a decrease of higher molecular weights and increased concentration in intermediate molecular weights due to the formation of protein conglomerates, similar findings were described by Pelembe et al., (2002). Although a reduction in protein solubility is widely reported, Li and Lee (2000) describe the associations or conglomerates formed under high extrusion conditions (temperature, and moisture content) are weak molecular bindings composed of non-covalent or fragile bonds easily breakable. Protein solubility is an outstanding characteristic in the formulation of instant foods. Nonetheless, this techno-functional attribute can be influenced during the extrusion process ( Table 3). Hence, the regulation of processing temperature and moisture content is in the interest of regulating the solubility of these processed flours.

Browning index

Browning index is the quantification of non-enzymatic browning reaction. This chemical reaction is developed when a reducing sugar interacts with amino groups in protein fractions, resulting in brown pigmentation in products exposed to high-temperature cooking processes such as extrusion ( Singh et al., 2007). The quantification of non-enzymatic Maillard browning holds significant importance not only due to its desirable attributes in food manufacturing, resulting in appealing colors and aromas that attract consumer preferences ( Ruiz et al., 2008). However, it becomes crucial to control this reaction as it negatively impacts protein digestibility and causes amino acid depletion from a nutritional perspective ( Osen, Toelstede, Eisner, & Schweiggert, 2015). The development of brown color during the extrusion process is partly associated with lysine depletion caused by interactions with simple sugars. Lysine is an essential amino acid in protein synthesis ( Iwe, Van Zuilichem, Stolp, & Ngoddy, 2004). While the evaluation of non-enzymatic browning relies on color parameters determined through the CIElab protocol, the predictions derived from this index demonstrate remarkable precision in assessing the behavior of Maillard reactions production ( Ruiz et al., 2008).

Most of the cereal, legume, or tuber flours encompass readily available free sugars within their matrix, which increase during the extrusion process due to gelatinization and the mechanical impact of the screws within the extruder equipment. Among the sugars documented as susceptible to Maillard reactions, glucose > d-mannose > d-fructose are considered more reactive as fundamental units compared to their dimers. A similar pattern of reactivity is observed for proteins, which exhibit enhanced responsiveness in Maillard reactions when present as basic constituents, namely amino acids ( Singh et al., 2007; Yadav et al., 2022). Maillard reactions are intensified when the available protein content in the raw material is higher, this is particularly noticeable in legume flours that are ready for such reactions ( Yadav et al., 2022).

Table 4 shows the effect of extrusion conditions on the generation of Maillard reactions. It is apparent that during the extrusion of flours to produce instant foods, intensified Maillard reactions occur with higher process temperatures and screw speeds. This can be attributed to the thermal and mechanical effects, which break down both starches and proteins, resulting in simpler components that promote Maillard reactions. As a result, there is an increase in brown color, quantified by the browning index, correlated with a decrease in luminosity (L*) and increasing the red (a*) and yellow (b*) colors ( Waramboi, Gidley, & Sopade, 2013; Yadav et al., 2022). High screw speed promotes a mechanical shearing force on the melted material as it crosses the barrel in the extruder, developing the damage of polysaccharides (starch), which can contribute production of the Maillard reaction ( Iwe et al., 2004; Yadav et al., 2022). On the other hand, it becomes apparent that the browning index decreases as the moisture content increases during the extrusion process. Although moisture content starts the Maillard reaction, a higher level of moisture increases the flow of the melted material, thereby diminishing its residence time and controlling the formation of this reaction. Water acts as a plasticizer in the process reducing the viscosity of the melted material ( Camire, 1991).

Table 4. Effect of extrusion parameters on the browning index.

Raw material Barrel temperature Moisture Screw speed Reference
Sorghum and barley blend + - + ( Koa et al., 2017)
Barley varieties + - ( Sharma et al., 2012)
Soybean and sweet potato + ( Iwe et al., 2004)
Sweet potato flour + - ( Waramboi et al., 2013)

In vitro starch digestion

Englyst, Kingman, and Cummings (1992) developed a colorimetric method to describe the three starches fractions in food matrices. Rapidly Digestible Starch (RDS), indicating starch that undergoes digestion within 20 minutes based on hydrolysis rates; Slowly Digestible Starch (SDS), denoting starch that is digested between 20 and 120 minutes; and Resistant Starch (RS), which can be analyzed in three fractions and corresponds to the starch fraction that remains undigested after 120 minutes. This method relies on controlled enzymatic assessment using pancreatin and amyloglucosidase. The evaluation of these starch fractions provides information into the in vivo starch digestion rate ( Smrckova et al., 2014; Zhang et al., 2019).

The evaluation of in vitro starch digestibility is one of the extensively studied process parameters in extruded foods. this method is capable to reveal the changes that occur in the starch fraction of raw and processed materials, as same as their potential nutritional effects. Moreover, the rate at which modified starches can be digested, the proportion of starches available for digestion, and indirectly their relationship with glycemic index (GI) associated to the blood sugar content. This can be critical when RDS levels are elevated as they could negatively affect consumer health ( Qi et al., 2021; Smrckova et al., 2014). The available information regarding in vitro starch digestion in extruded instant flours is limited. Based on Table 5, it is possible to assess the impact of modifying the parameter process during extrusion on the starch fractions in the raw materials. In a general, it can be established that the modification of process parameters such as temperature, moisture, and screw speed exhibit an inverse correlation with the quantification of the Rapidly Digestible Starch (RDS) fraction, in comparison to the Slowly Digestible Starch (SDS) and Resistant Starch (RS) fractions. Within the extrusion process, alterations take place in each starch fraction because of gelatinization and shear forces. Consequently, RDS starches tend to convert into dextrin and/or simple sugars, while the SDS and RS fractions exhibit a decline content and may be quantified as RDS due to those modifications.

Table 5. Effect of extrusion parameters on in vitro starch digestion.

Raw material Barrel temperature Moisture Screw speed Reference
RDS SDS RS RDS SDS RS RDS SDS RS
Buckwheat flour (Tartary) + - - - + + ( Zhang et al., 2023)
Pea flour + - - ( Qi et al., 2021)
Rice flour + - - ( Lai et al., 2022)
Bean varieties + - - - + + + - - ( Ai et al., 2016)
High amylose corn flour - + + ( Zhang et al., 2016)

RDS = Rapidly Digestible Starch, SDS = Slowly Digestible Starch, RS = Resistant Starch.

The variability in the in vitro starch digestion depends on the severity of the applied extrusion conditions to the raw material. Increasing the extrusion temperature leads to a high RDS content, attributable to modifications in the SDS and RS fractions ( Zhang et al., 2023). The extrusion temperature constitutes one of the principal factors responsible for the gelatinization of available starches, causing the loss of their crystalline structure and the fragmentation of amylose and amylopectin chains due to the thermo-mechanical impact of the screw. This facilitates amylase accessibility during digestion ( Lai et al., 2022). Conversely, increasing moisture content during the extrusion process reduces the mean residence time of the material inside extruder, resulting in higher quantifications of SDS and RS than RDS content. These results agree with the reduction in the in vitro starch digestion ( Zhang et al., 2023). Water acts as a plasticizer capable to modify the gelatinization temperature of starches ( Koa et al., 2017). Screw speed represents the factor with higher influence on the mechanical and shear forces during the extrusion process. Heightened screw speed enhances the starch structure modification through mechanical and shear-induced depolymerization, which impact the in vitro starch digestibility ( Koa et al., 2017). Table 5 demonstrates that higher screw speeds yield a greater amount of RDS while reducing the proportion of SDS and RS.

In vitro protein digestion

In vitro protein digestion is an indirect assessment of protein nutritional quality ( Akande et al., 2017; Omosebi et al., 2018). Plant proteins generally exhibit lower digestibility compared to the animal-derived proteins due to their amino acid configuration and the presence of antinutritional factors ( Atukuri et al., 2019). The digestibility of plant proteins can be enhanced through treatments such as extrusion cooking. The fitted process parameters during extrusion and their intensity effect in the extruder influence protein digestibility. These factors impart different characteristics to the protein fractions found in the raw materials. From a nutritional perspective, the protein digestion extent is related to their level of denaturation, wherein their quaternary structures lose order and transition into lower-order structures, promoting the intestinal proteolysis during digestion ( Qi et al., 2021; Ruiz et al., 2008). Based on the studies in Table 6, it can be observed that, in most cases, an increase in temperature correlates with enhanced in vitro protein digestibility. However, some reports showed a reduction in the in vitro protein digestion when the raw materials were exposed to extremely high temperature conditions during the extrusion process (see Table 6).

Table 6. Effect of extrusion parameters on in vitro protein digestibility.

Raw material Barrel temperature Moisture Screw speed Reference
Defatted Quinoa and Chia + ( Sánchez et al., 2022)
Sesame Flour + ( Ruiz et al., 2022)
Pea Flour + ( Qi et al., 2021)
Amaranth Flour + - + ( Atukuri et al., 2019)
Corn and Soy Protein + + + ( Omosebi et al., 2018
Amaranth-Based Mixture - - ( Akande et al., 2017)
QPM flour + + ( Reyes et al., 2003)

QPM = Quality Protein Maize.

Between the most reported reaction involving proteins during the extrusion process encompass Maillard reactions, protein crosslinking, racemization, degradation, and the generation of lysinoalanine ( Martínez et al., 2014a; Nahemiah et al., 2017; Omosebi et al., 2018; Ruiz et al., 2022; Silvestre et al., 2021). The quantification of these reactions tends to increase when proteins undergo excessive cooking during extrusion with a reduction in the in vitro protein digestion ( Reyes et al., 2003). Furthermore, it can be observed that an increase in moisture content generally leads to a reduction in protein digestibility. This is attributed to the low residence time effect, which hinders structural modifications of the proteins. Conversely, the high screw speed increases protein digestibility due to the mechanical impact exerted by the screws on the raw material. Considering that the extrusion process requires a direct exposure of raw materials to high temperatures and relatively reduced moisture levels, a substantial quantity of complexes resulting from the reaction between reducing sugars and free amino acids is generated, leading to the occurrence of Maillard reactions. Then it becomes an important condition that should be regulated. The Maillard reaction imparts costumer pleasing flavors and colors, but as a uncontrolled reaction imposes limitations on protein availability and digestibility ( Alam & Aslam, 2020; Atukuri et al., 2019). In extreme conditions it’s possible the formation of compounds such as acrylamides, which pose health risks and are synthesized when process temperatures overpass the threshold or when exposure time is long, even under low moisture content conditions during the extrusion process ( Alam & Aslam, 2020). Furthermore, higher screw speed during extrusion generates high shear forces, thereby boosting protein denaturation within the raw material and enhancing enzymatic hydrolysis during digestion ( Atukuri et al., 2019). The excessive thermo-mechanical effect made during the extrusion process can also give rise to protein crosslinking. In addition, the high moisture content during the extrusion process prompts protein swelling and softening, consequently facilitating their denaturation and fractioning due to the thermo-mechanical impact within the extruder ( Atukuri et al., 2019).

A few factors affecting in vitro protein digestibility during the extrusion process have been discussed thus far. However, it is notable to acknowledge that in plant-based raw materials, there exist other interfering elements that can also influence protein digestibility ( Qi et al., 2021; Ruiz et al., 2008; Silvestre et al., 2020; Pico et al., 2019). The presence of polyphenols in plant matrices can directly interact with digestive enzymes (such as amylase, trypsin, chymotrypsin, lipases), diminishing protein functionality and, consequently, reducing nutrient digestibility ( Omosebi et al., 2018). However, the extrusion process can significantly decrease the presence of these interfering compounds in protein digestion and decrease the molecular weight of proteins to facilitate their digestion.

Total phenolic compounds

The quantification of total phenolic compounds in vegetable matrices include free and bounded fractions and during extrusion process is possible to modify the relationship between the quantity of both fractions. Furthermore, it has been possible to observe a high quantification of total phenolic compounds when the extrusion conditions effectively break down the cell walls of the matrix ( Pico, et al., 2020; Pico et al., 2019). The increase of the temperature and screw speed during extrusion promotes the thermo-mechanical movement of the melted material inside the extruder, facilitating the release, extraction, and quantification of bound phenolic compounds, which then become part of the free phenolic fraction. Some phenolic species released include hydroxybenzoic acids, flavonols, catechins, and low molecular weight proanthocyanidins. However, it is important to note that certain studies report an increase in total phenolic compounds, while others report a decrease in this parameter, suggesting that the response may depend on the specific characteristics of the raw material and the employed extrusion conditions (see Table 7).

Table 7. Effect of extrusion parameters on total phenolic compounds.

Raw material Barrel temperature Moisture Screw speed Reference
Sesame Cake flour + + ( Ruiz et al., 2022)
Defatted Quinoa and Chia Flour + ( Sánchez et al., 2022)
Buckwheat - + ( Cheng et al., 2020)
Red Quinoa - ( Song et al., 2020)
Amaranth, Bean, and Corn Flours - - ( Akande et al., 2017)
Green Banana Flour - ( Sarawong et al., 2014)

On the other hand, it has been observed that increasing the moisture content during the extrusion process tends to reduce the quantification of total phenolic compounds ( Akande et al., 2017; Sarawong et al., 2014). Water acts as a plasticizer, preventing the structural breakdown of the cell walls in the matrices and making it difficult to quantify the fractions of bound phenolics ( Jan et al., 2017; Sarawong et al., 2014; Wang et al., 2022). However, it has also been reported that an increase in moisture content enhance the preservation of released phenolic fractions, as low moisture contents during the extrusion process can cause structural disruption or alteration of phenolic compounds ( Cheng et al., 2020). Nevertheless, it is imperative to optimize the operational parameters of the extrusion process to prevent excessive temperatures and/or shear conditions. Most of the phenolic compounds are sensitive to temperature, which can induce their structural modifications, leading to the loss of their functionality and potential quantification as functional constituents in foods ( Wang et al., 2022).

Antinutritional Factors (ANFs)

Plant-based raw materials used in food production possess small quantities of a distinctive chemical compound, which are synthesized primarily for the plant’s survival and multiple physiological functions ( Elizalde et al., 2009). Among these group of compounds are phytic acid, lectins, protease inhibitors (trypsin and chymotrypsin), saponins, oligosaccharides (raffinose and stachyose), and phenolic compounds (see Table 8). Consuming these components in high concentrations can lead to digestive issues, intoxication, allergies, and, in some cases, damage to intestinal epithelial cells, all these compounds have been grouped as antinutritional factors (ANFs) ( Elizalde et al., 2009). ANFs possess high activity and exhibit the capability of conformation complexes with molecules of nutritional importance. Trypsin inhibitors disrupt the enzymatic activity during protein hydrolysis, thereby impeding its absorption ( Thirunathan & Manickavasagan, 2019). Lectins, as glycoproteins, readily bind to red blood cell and intestinal epithelial cell walls, causing harm and an adverse effect in the intestinal microbiota ( Vidal et al., 2022). Phytic acid hinders mineral absorption at the intestinal level by forming complexes involving phytate-mineral-protein, which exhibit low solubility ( Vega et al., 2010). Certain phenolic compounds are regarded as ANFs due to their capacity to bind with proteins, reducing protein solubility and digestibility ( Vidal et al., 2022). Additionally, they influence consumption and acceptance due to production of bitter tastes and dark coloration ( Akande et al., 2017; Omosebi et al., 2018; Vidal et al., 2022). Oligosaccharides, such as raffinose and stachyose, are high molecular weight sugars commonly found in most legumes ( Thirunathan & Manickavasagan, 2019). These sugars are indigestible due to their structure and the presence of α-1-6 galactose linkages that resist intestinal hydrolysis. Legume grains generally contain higher proportions of these sugars, which, according to some studies, display reduced sensitivity to temperature effects ( Elizalde et al., 2009). However, their behavior can be influenced by processing conditions. Saponins, classified as glycosides of steroids or triterpenoids, display distinct characteristics such as imparting a bitter taste to quinoa and soybean seeds and their ability to generate foams, which interfere with mineral absorption in the intestine ( Elizalde et al., 2009; Gee et al., 1993).

Table 8. Effect of extrusion parameters on ANF content.

Raw material Product parameter/condition Barrel temperature Moisture Screw speed Reference
Lentil flour Raffinose - ( Ciudad et al., 2020)
Stachyose +
Bean flour Refinase - - ( Thirunathan & Manickavasagan, 2019)
Stachyose + - +
Amaranth, Bean, and Corn Flours Phytic Acid - - ( Akande et al., 2017)
Quinoa Flour Saponins - - ( Kowalski et al., 2016)
Corn, soybean, and African Treculia blend Phytic acid + + ( Nwabueze, 2007)
TI +
Peanut, Corn, and Soybean Flour TI - - ( Plahar et al., 2003)
Soybean and Sweet Potato Flour Blend TI + ( Iwe & Ngoddy, 2000)
Lentil Flour Tannins - + - ( Ummadi et al., 1995)
Soybean TI - + - ( Petres & Czukor, 1989)

TI = Trypsin Inhibitors, ANFs = Antinutritional Factors.

Tannins, categorized as phenolic compounds and recognized as ANFs, are present in the structure of various plant-based raw materials. Their consumption interferes with protein and mineral digestion as tannins form complexes with carbonyl groups in dietary proteins or enzymes ( Duguma, Forsido, Belachew, & Hensel, 2021; Nikmaram et al., 2017; Qi et al., 2021).

The ANFs in plant matrices interfere on nutrient absorption. Therefore, thermal treatments like extrusion are employed to mitigate their effects and enhance the overall digestibility of nutrients in pre-cooked cereal and legume flours. Table 8 shows the behavior of oligosaccharides, such as raffinose and stachyose, and the influence of the processing conditions applied during extrusion. It has been observed that increasing the temperature leads to a decrease in raffinose content while increasing stachyose content ( Ciudad et al., 2020; Thirunathan & Manickavasagan, 2019). The reduction in raffinose can be attributed to structural modifications, including the cleavage of 1-2 furanosidic bonds, which occur due to exposure to high temperatures. On the other hand, the increase in stachyose at higher temperatures and screw speeds is associated with the thermo-mechanical effect on the food matrix, which facilitates the release of bound oligosaccharides from other macromolecules and the disruption of cell walls, allowing their extraction as soluble components ( Cotacallapa et al., 2021). Similarly, Table 8 demonstrates that high temperatures inactivate the content of phytic acid due to its thermosensitivity and the formation of insoluble complexes with other components ( Omosebi et al., 2018; Batista et al., 2010). According to Rathod and Annapure (2016), both temperature and moisture content during the extrusion process contribute to the structural modifications of phytates in the raw materials. These changes may involve the cleavage of covalent bonds between amino groups and the hydrolysis of peptide bonds in aspartic acid residues, leading to the inactivation of phytates.

Likewise, the content of saponins exhibits a decrease with increasing temperature and moisture content during the extrusion process (see Table 8). This behavior is attributed to the shear and mechanical energy during extrusion, which alters the original structure of saponins, resulting in smaller chemical fragments and a reduction in the pungent or astringent taste in quinoa-based products ( Kowalski et al., 2016). In addition, Table 8 shows that the trypsin inhibitors tend to decrease under intense thermal and mechanical effects during extrusion, leading to molecular degradation ( Batista et al., 2010; Ciudad et al., 2020; Konstance et al., 1998). However, the trypsin inhibitors content increases when the extrusion conditions are less aggressive. The only condition that modifies this behavior is an increase in moisture content. While some reports suggest classifying ANFs based on their temperature sensitivity, it has been observed that the most affected by thermal and mechanical effects are protease inhibitors (trypsin and chymotrypsin inhibitors), including phytic acid and lectins ( Akande et al., 2017; Balandran et al., 1998; Camire, 1991; Elizalde et al., 2009). Tannins can develop complexes during the extrusion process under strong processing conditions. High temperatures and high screw speeds induce a thermal and shear effect that modifies the structure of these phenolic compounds. However, when the extrusion conditions are milder, achieved by increasing the moisture content, the preservation of tannins in the final product is higher ( Ummadi et al., 1995).

Conclusions

This review has demonstrated the usefulness of the extrusion cooking process in obtaining instant flours known as pregelatinized flours. The extrusion cooking process conditions such as temperature, moisture content of the material and screw speed, directly affect the behavior of the raw material components during the process. The most used raw materials to obtain pre-cooked flours have in their composition a significant amount of starch, protein, lipids, and others like fiber, micronutrients such as vitamins and minerals, all of them exposed to be modified by the thermo-mechanical conditions. These modifications influence the nutritional and functional characteristics of the final product.

The final results of the process will be associated with the modification of the operative extruder parameters, finding as results characteristics that become beneficial for the final product such as starch gelatinization, protein denaturation, increased in vitro digestibility, nutrient availability, increased soluble dietary fiber and reduction in the content of anti-nutritional factors (ANF), all of these characteristics are linked to the nutritional and functional properties of the instant flours. However, there is a lack of information that must be investigated regarding the already mentioned process conditions and other new ones, in the same way, to study their effect on the processed raw materials. There are even raw materials whose behavior is unknown, and which may be important in obtaining instant flour by extrusion.

It should be noted that the moisture content and the temperature of the process influence the solubility of the proteins and the gelatinization of the starch, which is fundamental in the development of instant preparation foods; therefore, it is necessary to modulate the moisture content and the process temperature to keep the solubility of these processed flours under control. On the other hand, the increase in temperature increases the digestibility of protein in vitro and by extrusion cooking it is possible to improve the digestibility of proteins of vegetable origin. In the same way, the phenolic content is modified by increasing in availability of thermostable bonded species due to cell wall broken of raw materials due to thermo-mechanical conditions during extrusion process.

As it has been established so far, the presence of ANFs in plant matrices represents an important limitation on the levels of nutrient absorption, it is for this reason that heat treatments such as extrusion reduce their effect and enhance the effective digestibility of available nutrients from precooked cereal and legume flours.

Funding Statement

This work has been fully financed by the Colombian General Reimbursement System. Executed in the Universidad del Cauca as center of technological development, and SEGALCO as a technological validation center, within the framework of the SGR BPIN 2020000100052 project.

The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript.

[version 1; peer review: 1 approved

Data availability

No data are associated with this article.

References

  1. Ai Y, Cichy KA, Harte JB, et al. : Effects of extrusion cooking on the chemical composition and functional properties of dry common bean powders. Food Chem. 2016;211:538–545. 10.1016/j.foodchem.2016.05.095 [DOI] [PubMed] [Google Scholar]
  2. Akande O, Nakimbugwe D, Mukisa I: Optimization of extrusion conditions for the production of instant grain amaranth based porridge flour. Food Sci. Nutr. 2017;5:1205–1214. 10.1002/fsn3.513 [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. Alam M, Aslam R: Extrusion for the Production of Functional Foods and Ingredients. Innovative Food Processing Technologies: A Comprehensive Review. Elsevier;2020. 10.1016/b978-0-08-100596-5.23041-2 [DOI] [Google Scholar]
  4. Ali S, Singh B, Sharma S: Response surface analysis and extrusion process optimisation of maize–mungbean-based instant weaning food. Int. J. Food Sci. Technol. 2016;51(10):2301–2312. 10.1111/ijfs.13186 [DOI] [Google Scholar]
  5. Allied MR: Precooked Corn Flour Market Research. 2020. Reference Source
  6. Atukuri J, Odong BB, Muyonga JH: Multi-response optimization of extrusion conditions of grain amaranth flour by response surface methodology. Food Sci. Nutr. 2019;7(12):4147–4162. 10.1002/fsn3.1284 [DOI] [PMC free article] [PubMed] [Google Scholar]
  7. Balandran R, Barbosa G, Zazueta J, et al. : Functional and Nutritional Properties of Extruded Whole Pinto Bean Meal (Phaseolus Vulgaris L). Engineering Processing. 1998;63(1):113–116. 10.1111/j.1365-2621.1998.tb15688.x [DOI] [Google Scholar]
  8. Batista K, Prudêncio S, Fernandes K: Changes in the functional properties and antinutritional factors of extruded hard-to-cook common beans (phaseolus vulgaris, l.). J. Food Sci. 2010;75(3):C286–C290. 10.1111/j.1750-3841.2010.01557.x [DOI] [PubMed] [Google Scholar]
  9. Camire M: Protein Functionality Modification by Extrusion Cooking. J. Am. Oil Chem. Soc. 1991;68(3):200–205. 10.1007/BF02657770 [DOI] [Google Scholar]
  10. Chulaluck C, Plernchai T, Nipat L, et al. : Effects of Extrusion Conditions on the Physical and Functional Properties of Instant Cereal Beverage Powders Admixed with Mulberry (Morus alba L.) Leaves. Food Sci. Technol. 2008;14(5):421–430. [Google Scholar]
  11. Chauhan, Bains G: Effect of some extruder variables on physico-chemical properties of extruded rice-Legume blends. Food Chem. 1988;27(3):213–224. 10.1016/0308-8146(88)90064-7 [DOI] [Google Scholar]
  12. Cheftel JC: Nutritional effects of extrusion-cooking. Food Chem. 1986;20(4):263–283. 10.1016/0308-8146(86)90096-8 [DOI] [Google Scholar]
  13. Cheng W, Gao L, Wu D, et al. : Effect of improved extrusion cooking technology on structure, physiochemical and nutritional characteristics of physically modified buckwheat flour: Its potential use as food ingredients. Lwt. 2020;133(July):109872. 10.1016/j.lwt.2020.109872 [DOI] [Google Scholar]
  14. Ciudad M, Fernández V, Cuadrado C, et al. : Novel gluten-free formulations from lentil flours and nutritional yeast: Evaluation of extrusion effect on phytochemicals and non-nutritional factors. Food Chem. 2020;315:126175. 10.1016/j.foodchem.2020.126175 [DOI] [PubMed] [Google Scholar]
  15. Cotacallapa M, Vega E, Maieves H, et al. : Extrusion process as an alternative to improve pulses products consumption. A review. Foods. 2021;10(5):1–23. 10.3390/foods10051096 [DOI] [PMC free article] [PubMed] [Google Scholar]
  16. Dalbhagat CG, Mahato DK, Mishra HN: Effect of extrusion processing on physicochemical, functional and nutritional characteristics of rice and rice-based products: A review. Trends Food Sci. Technol. 2019;85(January):226–240. 10.1016/j.tifs.2019.01.001 [DOI] [Google Scholar]
  17. Dong GM, Dong JL, Zhu YY, et al. : Development of weaning food with prebiotic effects based on roasted or extruded quinoa and millet flour. J. Food Sci. 2021;86(3):1089–1096. 10.1111/1750-3841.15616 [DOI] [PubMed] [Google Scholar]
  18. Duguma H, Forsido S, Belachew T, et al. : Changes in Anti-nutritional Factors and Functional Properties of Extruded Composite Flour. Front. Sustain. Food Syst. 2021;5(November):1–11. 10.3389/fsufs.2021.713701 [DOI] [Google Scholar]
  19. Elizalde A, Portilla Y, Chaparro D: Factores antinutricionales en semillas. Facultad de Ciencias Agropecuarias. 2009;7(1):54. [Google Scholar]
  20. Englyst H, Kingman S, Cummings J: Classification and measurement of nutritionally important starch fractions. Eur. J. Clin. Nutr. 1992;46(2):33–50. [PubMed] [Google Scholar]
  21. Espinosa J, Serna S, Esther P: Extruded chickpea flour sequentially treated with alcalase and α - amylase produces dry instant beverage powders with enhanced yield and nutritional properties. Int. J. Food Sci. Technol. 2021;56:5178–5189. 10.1111/ijfs.15199 [DOI] [Google Scholar]
  22. Gee J, Price K, Ridout C, et al. : Saponins of quinoa (Chenopodium quinoa): Effects of processing on their abundance in quinoa products and their biological effects on intestinal mucosal tissue. J. Sci. Food Agric. 1993;63(2):201–209. 10.1002/jsfa.2740630206 [DOI] [Google Scholar]
  23. Giraldo G, Rodríguez S, Sanabria N: Preparation of instant green banana flour powders by an extrusion process. Powder Technol. 2019;353:437–443. 10.1016/j.powtec.2019.05.050 [DOI] [Google Scholar]
  24. Heredia E, Contreras M, Perez E, et al. : Assessment of the techno-functionality, starch digestion rates and protein quality of rice flour – whey protein instant powders produced in a twin extruder. Int. J. Food Sci. Technol. 2019;55(2):878–890. 10.1111/ijfs.14376 [DOI] [Google Scholar]
  25. Iwe M, Ngoddy P: Effect of extrusion on trypsin inhibitor contents of soy-sweet potato mixtures. J. Food Process. Preserv. 2000;24(6):453–463. 10.1111/j.1745-4549.2000.tb00434.x [DOI] [Google Scholar]
  26. Iwe M, Van Zuilichem D, Stolp W, et al. : Effect of extrusion cooking of soy-sweet potato mixtures on available lysine content and browning index of extrudates. J. Food Eng. 2004;62(2):143–150. 10.1016/S0260-8774(03)00212-7 [DOI] [Google Scholar]
  27. Jan R, Saxena DC, Singh S: Effect of extrusion variables on antioxidant activity, total phenolic content and dietary fibre content of gluten-free extrudate from germinated Chenopodium (Chenopodium album) flour. Int. J. Food Sci. Technol. 2017;52(12):2623–2630. 10.1111/ijfs.13549 [DOI] [Google Scholar]
  28. Jiménez MD, Lobo MO, Sammán NC: Technological and Sensory Properties of Baby Purees Formulated with Andean Grains and Dried with Different Methods. Proceedings. 2020;53(1):13. 10.3390/proceedings2020053013 [DOI] [Google Scholar]
  29. Kaur N, Singh B, Sharma S: Comparison of quality protein maize (QPM) and normal maize with respect to properties of instant porridge. LWT Food Sci. Technol. 2019;99:291–298. 10.1016/j.lwt.2018.09.070 [DOI] [Google Scholar]
  30. Koa S, Jin X, Zhang J, et al. : Extrusion of a model sorghum-barley blend: Starch digestibility and associated properties. J. Cereal Sci. 2017;75:314–323. 10.1016/j.jcs.2017.04.007 [DOI] [Google Scholar]
  31. Konstance R, Onwulata C, Smith P, et al. : Nutrient-based corn and soy products by twin-screw extrusion. J. Food Sci. 1998;63(5):864–868. 10.1111/j.1365-2621.1998.tb17915.x [DOI] [Google Scholar]
  32. Kowalski R, Medina I, Thapa B, et al. : Extrusion processing characteristics of quinoa (Chenopodium quinoa Willd.) var. Cherry Vanilla. J. Cereal Sci. 2016;70:91–98. 10.1016/j.jcs.2016.05.024 [DOI] [Google Scholar]
  33. Lai S, Zhang T, Wang Y, et al. : Effects of different extrusion temperatures on physicochemical, rheological and digestion properties of rice flour produced in a pilot-scale extruder. Int. J. Food Sci. Technol. 2022;57(10):6773–6784. 10.1111/ijfs.16026 [DOI] [Google Scholar]
  34. Li M, Lee T: Effect of extrusion temperature on the solubility and molecular weight of lentil bean flour proteins containing low cysteine residues. J. Agric. Food Chem. 2000;48(3):880–884. 10.1021/jf990328f [DOI] [PubMed] [Google Scholar]
  35. Li M, Lee TC: Relationship of the Extrusion Temperature and the Solubility and Disulfide Bond Distribution of Wheat Proteins. J. Agric. Food Chem. 1997;45(7):2711–2717. 10.1021/jf960703t [DOI] [Google Scholar]
  36. Martínez M, Calviño A, Rosell C, et al. : Effect of Different Extrusion Treatments and Particle Size Distribution on the Physicochemical Properties of Rice Flour. Food Bioprocess Technol. 2014b;7(9):2657–2665. 10.1007/s11947-014-1252-7 [DOI] [Google Scholar]
  37. Martínez M, Rosell C, Gómez M: Modification of wheat flour functionality and digestibility through different extrusion conditions. J. Food Eng. 2014a;143:74–79. 10.1016/j.jfoodeng.2014.06.035 [DOI] [Google Scholar]
  38. Mayachiew P, Charunuch C, Devahastin S: Physicochemical and thermal properties of extruded instant functional rice porridge powder as affected by the addition of soybean or mung bean. J. Food Sci. 2015;80(12):E2782–E2791. 10.1111/1750-3841.13118 [DOI] [PubMed] [Google Scholar]
  39. Mouquet C, Salvignol B, Hoan N, et al. : Ability of a ‘“very low-cost extruder”’ to produce instant infant flours at a small scale in Vietnam. Food Chem. 2003;82:249–255. 10.1016/S0308-8146(02)00545-9 [DOI] [Google Scholar]
  40. Nahemiah D, Nkama I, Bada M, et al. : Multiple parameter optimization of hydration characteristics and proximate compositions of rice-soybean extruded foods. Open Access Library Journal. 2017;04(02):1–22. 10.4236/oalib.1102930 [DOI] [Google Scholar]
  41. Nahemiah D, Nkama I, Halidu M: Application of Response Surface Methodology (RSM) for the Production and Optimization of Extruded Instant Porridge from Broken Rice Fractions Blended with Cowpea. Int. J. Nutr. Food Sci. 2016;5(2):105–116. 10.11648/j.ijnfs.20160502.13 [DOI] [Google Scholar]
  42. Nahemiah D, Nkama I, Badau M, et al. : Statistical modeling and optimization of processing conditions of twin-screw extruded rice-legume instant breakfast gruel. Journal of Engineering, Technology and Environment. 2018;14:639–712. [Google Scholar]
  43. Nikmaram N, Leong S, Koubaa M, et al. : Effect of extrusion on the anti-nutritional factors of food products: An overview. Food Control. 2017;79:62–73. 10.1016/j.foodcont.2017.03.027 [DOI] [Google Scholar]
  44. Nwabueze T: Effect of process variables on trypsin inhibitor activity (TIA), phytic acid and tannin content of extruded African breadfruit-corn-soy mixtures: A response surface analysis. Lwt. 2007;40(1):21–29. 10.1016/j.lwt.2005.10.004 [DOI] [Google Scholar]
  45. Offiah V, Kontogiorgos V, Falade KO: Extrusion processing of raw food materials and by-products: A review. Crit. Rev. Food Sci. Nutr. 2019;59(18):2979–2998. 10.1080/10408398.2018.1480007 [DOI] [PubMed] [Google Scholar]
  46. Omosebi M, Osundahunsi O, Fagbemi T: Effect of extrusion on protein quality, antinutritional factors, and digestibility of complementary diet from quality protein maize and soybean protein concentrate. J. Food Biochem. 2018;42(4):1–10. 10.1111/jfbc.12508 [DOI] [Google Scholar]
  47. Onyeoziri I, Torres P, Hamaker B, et al. : Descriptive sensory analysis of instant porridge from stored wholegrain and decorticated pearl millet flour cooked, stabilized and improved by using a low-cost extruder. J. Food Sci. 2021;86(9):3824–3838. 10.1111/1750-3841.15862 [DOI] [PubMed] [Google Scholar]
  48. Osen R, Toelstede S, Eisner P, et al. : Effect of high moisture extrusion cooking on protein-protein interactions of pea (Pisum sativum L.) protein isolates. Int. J. Food Sci. Technol. 2015;50(6):1390–1396. 10.1111/ijfs.12783 [DOI] [Google Scholar]
  49. Otondi E, Nduko J, Omwamba M: Physico-chemical properties of extruded cassava-chia seed instant flour. Journal of Agriculture and Food Research. 2020;2(July):100058. 10.1016/j.jafr.2020.100058 [DOI] [Google Scholar]
  50. Pelembe L, Erasmus C, Taylor J: Development of a protein-rich composite sorghum - Cowpea instant porridge by extrusion cooking process. Lwt. 2002;35(2):120–127. 10.1006/fstl.2001.0812 [DOI] [Google Scholar]
  51. Petres J, Czukor B: Investigation of the effects of extrusion cooking on antinutritional factors in soybeans employing response surface analysis Part 1. Effect of extrusion cooking on trypsin-inhibitor activity. Nahrung. 1989;33(3):275–281. 10.1002/food.19890330312 [DOI] [Google Scholar]
  52. Pham C, Del Rosario R: Studies on the development of texturized vegetable products by the extrusion process. II. Effects of extrusion variables on the available lysine, total and reducing sugars. Int. J. Food Sci. Technol. 1984;19(5):549–559. 10.1111/j.1365-2621.1984.tb01871.x [DOI] [Google Scholar]
  53. Pico J, Pismag RY, Laudouze M, et al. : Systematic evaluation of the Folin-Ciocalteu and Fast Blue BB reactions during the analysis of total phenolics in legumes, nuts and plant seeds. Food Funct. 2020;11(11):9868–9880. 10.1039/d0fo01857k [DOI] [PubMed] [Google Scholar]
  54. Pico J, Xu K, Guo M, et al. : Manufacturing the ultimate green banana flour: Impact of drying and extrusion on phenolic profile and starch bioaccessibility. Food Chem. 2019;297(February):124990. 10.1016/j.foodchem.2019.124990 [DOI] [PubMed] [Google Scholar]
  55. Pismag R, Pico J, Fern A, et al. : α -Amylase reactive extrusion enhances the protein digestibility of saponin-free quinoa flour while preserving its total phenolic content. Innov. Food Sci. Emerg. Technol. 2023;88:103448. 10.1016/j.ifset.2023.103448 [DOI] [Google Scholar]
  56. Plahar WA, Onuma Okezie B, Gyato CK: Development of a high protein weaning food by extrusion cooking using peanuts, maize and soybeans. Plant Foods Hum. Nutr. 2003;58(3):1–12. 10.1023/B:QUAL.0000041157.35549.b3 12859008 [DOI] [Google Scholar]
  57. Qi M, Zhang G, Ren Z, et al. : Impact of extrusion temperature on in vitro digestibility and pasting properties of pea flour. Plant Foods Hum. Nutr. 2021;76(1):26–30. 10.1007/s11130-020-00869-1 [DOI] [PubMed] [Google Scholar]
  58. Rathod R, Annapure U: Technology Effect of extrusion process on antinutritional factors and protein and starch digestibility of lentil splits. LWT Food Sci. Technol. 2016;66:114–123. 10.1016/j.lwt.2015.10.028 [DOI] [Google Scholar]
  59. Reyes C, Milán J, Gutiérrez R, et al. : Instant flour from quality protein maize (Zea mays L). Optimization of extrusion process. Lwt. 2003;36(7):685–695. 10.1016/S0023-6438(03)00089-6 [DOI] [Google Scholar]
  60. Ruiz J, Martínez A, Drago S, et al. : Extrusion of a hard-to-cook bean (Phaseolus vulgaris L.) and quality protein maize (Zea mays L.) flour blend. LWT Food Sci. Technol. 2008;41(10):1799–1807. 10.1016/j.lwt.2008.01.005 [DOI] [Google Scholar]
  61. Ruiz X, Ruiz J, Espinoza R, et al. : Use of sesame by-product and optimized extrusion to obtain a functional flour with improved techno-functional, nutritional and antioxidant properties. Acta Universitaria. 2022;32:1–20. 10.15174/au.2022.3494 [DOI] [Google Scholar]
  62. Sandrin R, Caon T, Zibetti W, et al. : Effect of extrusion temperature and screw speed on properties of oat and rice flour extrudates. J. Sci. Food Agric. 2018;98:3427–3436. 10.1002/jsfa.8855 [DOI] [PubMed] [Google Scholar]
  63. Sánchez L, Reyes C, Garzón J, et al. : Functional gluten-free beverage elaborated from whole quinoa and defatted chia extruded flours: antioxidant and antihypertensive potentials. Acta Universitaria. 2022;32:1–22. 10.15174/au.2022.3413 [DOI] [Google Scholar]
  64. Sarawong C, Schoenlechner R, Sekiguchi K, et al. : Effect of extrusion cooking on the physicochemical properties, resistant starch, phenolic content and antioxidant capacities of green banana flour. Food Chem. 2014;143:33–39. 10.1016/j.foodchem.2013.07.081 [DOI] [PubMed] [Google Scholar]
  65. Sebio L, Chang Y: Effects of selected process parameters in extrusion of yam flour (Dioscorea rotundata) on physicochemical properties of the extrudates. Nahrung. 2000;44(2):96–101. [DOI] [PubMed] [Google Scholar]
  66. Sharma P, Gujral H, Singh B: Antioxidant activity of barley as affected by extrusion cooking. Food Chem. 2012;131(4):1406–1413. 10.1016/j.foodchem.2011.10.009 [DOI] [Google Scholar]
  67. Silvestre R, Espinosa J, Heredia E, et al. : Biocatalytic Degradation of Proteins and Starch of Extruded Whole Chickpea Flours. Food Bioprocess Technol. 2020;13(10):1703–1716. 10.1007/s11947-020-02511-z [DOI] [Google Scholar]
  68. Silvestre R, Espinosa J, Pérez E, et al. : Extruded chickpea flour sequentially treated with alcalase and α-amylase produces dry instant beverage powders with enhanced yield and nutritional properties. Int. J. Food Sci. Technol. 2021;56(10):5178–5189. 10.1111/ijfs.15199 [DOI] [Google Scholar]
  69. Singh R: Effects of particle size distribution and extrusion processing parameters on the technofunctional properties of soy bean meal. Frontiers in Neuroscience. Canadá: University of Manitoba;2021. [Google Scholar]
  70. Singh S, Gamlath S, Wakeling L: Nutritional aspects of food extrusion: A review. Int. J. Food Sci. Technol. 2007;42(8):916–929. 10.1111/j.1365-2621.2006.01309.x [DOI] [Google Scholar]
  71. Smrckova P, Saglamtas M, Hofmanová T, et al. : Effect of process parameters on slowly digestible and resistant starch content in extrudates. Czech J. Food Sci. 2014;32(5):503–508. 10.17221/162/2014-cjfs [DOI] [Google Scholar]
  72. Song J, Shao Y, Chen X, et al. : Release of characteristic phenolics of quinoa based on extrusion technique. Food Chem. 2020;374(November):128780. 10.1016/j.foodchem.2020.128780 [DOI] [PubMed] [Google Scholar]
  73. Thirunathan P, Manickavasagan A: Processing methods for reducing alpha-galactosides in pulses. Crit. Rev. Food Sci. Nutr. 2019;59(20):3334–3348. 10.1080/10408398.2018.1490886 [DOI] [PubMed] [Google Scholar]
  74. Tovar C, Perafan E, Enriquez M, et al. : Evaluación del efecto del proceso de extrusión en harina de quinua (Chenopodium quinoa Willd) normal y germinada. Biotecnología En El Sector Agropecuario y Agroindustrial. 2017;15(2):30–38. 10.18684/BSAA(15)30-38 [DOI] [Google Scholar]
  75. Transparency, M. R: Pregelatinized flour market. 2019. Reference Source
  76. Ummadi P, Chenoweth W, Uebersax M: The influence of extrusion processing on iron dialyzability, and tannins in legumes. J. Food Process. Preserv. 1995;19(2):119–131. 10.1111/j.1745-4549.1995.tb00282.x [DOI] [Google Scholar]
  77. Vega A, Miranda M, Vergara J, et al. : Nutrition facts and functional potential of quinoa (Chenopodium quinoa willd.), an ancient Andean grain: a review. J. Sci. Food Agric. 2010;90:2541–2547. 10.1002/jsfa.4158 [DOI] [PubMed] [Google Scholar]
  78. Vidal N, Roman L, Swaraj V, et al. : Enhancing the nutritional value of cold-pressed oilseed cakes through extrusion cooking. Innov. Food Sci. Emerg. Technol. 2022;77(January):102956. 10.1016/j.ifset.2022.102956 [DOI] [Google Scholar]
  79. Wang Q, Li L, Wang T, et al. : A review of extrusion-modified underutilized cereal flour: chemical composition, functionality, and its modulation on starchy food quality. Food Chem. 2022;370(October 2021):131361. 10.1016/j.foodchem.2021.131361 [DOI] [PubMed] [Google Scholar]
  80. Wang S, Ai Y, Hood S, et al. : Effect of barrel temperature and feed moisture on the physical properties of chickpea, sorghum, and maize extrudates and the functionality of their resultant flours—Part 1. Cereal Chem. 2019;96(4):609–620. 10.1002/cche.10149 [DOI] [Google Scholar]
  81. Waramboi J, Gidley M, Sopade P: Carotenoid contents of extruded and non-extruded sweetpotato flours from Papua New Guinea and Australia. Food Chem. 2013;141(3):1740–1746. 10.1016/j.foodchem.2013.04.070 [DOI] [PubMed] [Google Scholar]
  82. Yadav G, Dalbhagat C, Mishra H: Effects of extrusion process parameters on cooking characteristics and physicochemical, textural, thermal, pasting, microstructure, and nutritional properties of millet-based extruded products: A review. J. Food Process Eng. 2022;45(9):1–25. 10.1111/jfpe.14106 [DOI] [Google Scholar]
  83. Zhang B, Liu G, Ying D, et al. : Effect of extrusion conditions on the physico-chemical properties and in vitro protein digestibility of canola meal. Food Res. Int. 2017;100(April):658–664. 10.1016/j.foodres.2017.07.060 [DOI] [PubMed] [Google Scholar]
  84. Zhang X, Chen Y, Zhang R, et al. : Effects of extrusion treatment on physicochemical properties and in vitro digestion of pregelatinized high amylose maize flour. J. Cereal Sci. 2016;68:108–115. 10.1016/j.jcs.2016.01.005 [DOI] [Google Scholar]
  85. Zhang Y, Zhang Y, Li B, et al. : In vitro hydrolysis and estimated glycemic index of jackfruit seed starch prepared by improved extrusion cooking technology. Int. J. Biol. Macromol. 2019;121:1109–1117. 10.1016/j.ijbiomac.2018.10.075 [DOI] [PubMed] [Google Scholar]
  86. Zhang Z, Zhu M, Xing B, et al. : Effects of extrusion on structural properties, physicochemical properties and in vitro starch digestibility of Tartary buckwheat flour. Food Hydrocoll. 2023;135(80):108197. 10.1016/j.foodhyd.2022.108197 [DOI] [Google Scholar]
F1000Res. 2024 Feb 8. doi: 10.5256/f1000research.154135.r220796

Reviewer response for version 1

Martha Isabel Sanchez 1

This review presents in a comprehensive and organized way the theoretical framework concerning the influence of extrusion parameters on the functional and nutritional properties of precooked or instant flours, both as end-products and ingredients. It highlights the pivotal role of process parameters within the extruder, including temperature, screw speed, and raw materials moisture content, among others, and elucidates their correlation with the modifications observed in the structural composition of these materials.

Below are some recommendations from the text:

1. I recommend including a figure of the extrusion process/equipment where parts and some operating conditions are mentioned, considering that throughout the manuscript, reference is made to process/equipment operating conditions.

2. It is necessary to include an explanation in the footer of each Table indicating the information and the meaning of the symbols (+) and (-).

3. In the section on Maillard reactions, it is necessary to mention in more detail the type of raw materials involved, what type of colors are desirable or undesirable in the final product, and their effect on consumer preference.

4. Conclusion "  However, there is a lack of information that must be investigated regarding the already mentioned process conditions and other new ones, in the same way, to study their effect on the processed raw material" does not take into account information previously mentioned in the text, is broad, and has no basis in the text to be included as a conclusion of the manuscript.

Is the review written in accessible language?

Yes

Are all factual statements correct and adequately supported by citations?

Yes

Are the conclusions drawn appropriate in the context of the current research literature?

Partly

Is the topic of the review discussed comprehensively in the context of the current literature?

Yes

Reviewer Expertise:

Food Engineering, Food Science and Technology

I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard.

F1000Res. 2023 Nov 15. doi: 10.5256/f1000research.154135.r220802

Reviewer response for version 1

Mercedes Pedrosa 1

I have reviewed the paper entitled effect of extrusion cooking on the chemical and nutritional properties of instant flours: a review.

In general, the paper is of interest and it is well written. However, the discussion according to the literature has to be improved.

I do not agree with the sentence on page 3 that affirms that the parameters of extrusion are less discussed in the literature. There are many papers that compare the effect of temperature, moisture, speed screw, etc. on different compounds. Please revise this fact and add the corresponding references.

The main criticism is about the values of the parameters that the authors discuss. The authors include the different values of the parameters chose in the table 1; however, these values do not appear in the other tables nor in the text.

For example, in table 2. The first line the authors write that barrel temperature, moisture and screw speed affect the free sugars of wheat flour. However, they only write in the table the moisture values.

This problem can be observed in all the tables. Moreover, from table 4 to 8, the values do not appear.

In page 8, the authors write that table 5 demonstrates that higher screw speeds yield a greater amount of RDS….. However, in the 5 and in the text they do not write the values of these parameters.

Something similar can be observed in the text. For example, the authors write about an increase in the temperature or moisture produce an  XXX  effect. However, it is impossible to know which the range of this increase is, or they write about milder extrusion conditions, but they do not say which are the values of the different parameter necessaries to establish these mild conditions.

On page 5, the authors say that extrusion produces free-sugars. Please add an example of these sugars.

In page 9 when they write about ANF, please correct the name oligosaccharides by galacto-oligosaccharides or oligosaccharides of raffinose family...

Table 6. Many of these papers studied more than an ANF, please include them in the table. The raffinose and stachyose resit the intestinal hydrolysis because mammals do not have the enzyme galactosidase. Please correct the sentence.

Phytic acid is not very thermosensitibe compounds.

Page 11, the authors say that extrusion produced an increase of trypsin inhibitors; however there are many papers that establish the opposite trend.

The extrusion reduces some ANF and the smallest amount present in the extruded products can exert a positive health effect. Please add some sentence.

Is the review written in accessible language?

Yes

Are all factual statements correct and adequately supported by citations?

Yes

Are the conclusions drawn appropriate in the context of the current research literature?

Partly

Is the topic of the review discussed comprehensively in the context of the current literature?

Partly

Reviewer Expertise:

Food Technology,  extrusion, bioactive compounds.

I confirm that I have read this submission and believe that I have an appropriate level of expertise to confirm that it is of an acceptable scientific standard, however I have significant reservations, as outlined above.

F1000Res. 2024 Jan 10.
Remigio Pismag 1

I do not agree with the sentence on page 3 that affirms that the parameters of extrusion are less discussed in the literature. There are many papers that compare the effect of temperature, moisture, speed screw, etc. on different compounds. Please revise this fact and add the corresponding references.

R/ Dear reviewer,

In this paper, we are discussing about the reduced amount of information about the extrusion process in the develop of instant food products specifically. We carry out a searching focused on these topics: instant powders, instant porridge, instant beverages, and other same products all of them obtained by extrusion.

However, we had clarified this issue on page 3 following your recommendation.

The main criticism is about the values of the parameters that the authors discuss. The authors include the different values of the parameters chose in the table 1; however, these values do not appear in the other tables nor in the text.

R/ We have adjusted the table with the information required. In addition, we had extended our discussion around the table 1.  

For example, in table 2. The first line the authors write that barrel temperature, moisture and screw speed affect the free sugars of wheat flour. However, they only write in the table the moisture values.

R/ We have adjusted the table with the information required.

This problem can be observed in all the tables. Moreover, from table 4 to 8, the values do not appear.

R/ We have adjusted the tables with the information required.

In page 8, the authors write that table 5 demonstrates that higher screw speeds yield a greater amount of RDS….. However, in the 5 and in the text they do not write the values of these parameters.

R/ We have adjusted the tables with the information required.

Something similar can be observed in the text. For example, the authors write about an increase in the temperature or moisture produce an  XXX  effect. However, it is impossible to know which the range of this increase is, or they write about milder extrusion conditions, but they do not say which are the values of the different parameter necessaries to establish these mild conditions.

R/ We have adjusted all the tables with the information required. We are following your recommendation.

On page 5, the authors say that extrusion produces free-sugars. Please add an example of these sugars.

R/ We describe the type of sugars generated during extrusion of cereal flours and we added examples of free sugars reported in extrusion of legume flours.

In page 9 when they write about ANF, please correct the name oligosaccharides by galacto-oligosaccharides or oligosaccharides of raffinose family...

R/ We are following your recommendations, and this issue was fitted.

Table 6. Many of these papers studied more than an ANF, please include them in the table. The raffinose and stachyose resit the intestinal hydrolysis because mammals do not have the enzyme galactosidase. Please correct the sentence.

R/ We added the ANFs available in the papers and all of them were included. On the other hand, we included the sentence adjusted in our discussion.

Phytic acid is not very thermosensitibe compounds.

R/ We are following your recommendations, and this issue was fitted.

Page 11, the authors say that extrusion produced an increase of trypsin inhibitors; however there are many papers that establish the opposite trend.

R/ We have fitted this issue, and we have explained the soft extrusion condition promotes the release and preservation of trypsin inhibitors.

The extrusion reduces some ANF and the smallest amount present in the extruded products can exert a positive health effect. Please add some sentence.

R/ We are following your recommendations, and we added a sentence.

Associated Data

    This section collects any data citations, data availability statements, or supplementary materials included in this article.

    Data Availability Statement

    No data are associated with this article.


    Articles from F1000Research are provided here courtesy of F1000 Research Ltd

    RESOURCES