Skip to main content
PMC home page
Nature Portfolio logoLink to Nature Portfolio
. 2015 May 6;6:7013. doi: 10.1038/ncomms8013

Triangular prism-shaped β-peptoid helices as unique biomimetic scaffolds

Jonas S Laursen 1,*, Pernille Harris 1, Peter Fristrup 1, Christian A Olsen 1,a,*
PMCID: PMC4432622  PMID: 25943784

Abstract

β-Peptoids are peptidomimetics based on N-alkylated β-aminopropionic acid residues (or N-alkyl-β-alanines). This type of peptide mimic has previously been incorporated in biologically active ligands and has been hypothesized to be able to exhibit foldamer properties. Here we show, for the first time, that β-peptoids can be tuned to fold into stable helical structures. We provide high-resolution X-ray crystal structures of homomeric β-peptoid hexamers, which reveal right-handed helical conformations with exactly three residues per turn and a helical pitch of 9.6–9.8 Å between turns. The presence of folded conformations in solution is supported by circular dichroism spectroscopy showing length- and solvent dependency, and molecular dynamics simulations provide further support for a stabilized helical secondary structure in organic solvent. We thus outline a framework for future design of novel biomimetics that display functional groups with high accuracy in three dimensions, which has potential for development of new functional materials.

Inline graphicβ-Peptoids are based on N-alkylated β-aminopropionic acid residues, which have been inspired by the more intensely studied peptoids and β-peptides. Here, the authors report X-ray crystal structures of oligomeric β-peptoids demonstrating secondary structures with this backbone.

The ability to mimic or complement native protein and peptide folds using non-natural oligomers endowed with resistance towards proteolysis holds promise for the design of chemotypes with valuable applications in medical and materials sciences. Oligomeric architectures able to adopt well-defined folding patterns have been coined foldamers1 and several peptidomimetic designs have demonstrated this type of behaviour2,3,4,5, including β-peptides6,7,8 and peptoids (N-alkylglycines)9,10. The β-peptoids, first described as dimers and trimers by Hamper et al.11, combine the structural features of the two latter mentioned foldamers, and have been suggested by theoretical methods to be able to adopt helical conformations12. Bulky N-alkyl side chains with chirality in the α-position have been shown to induce helical secondary structures in α-peptoids with alternating handedness depending on stereochemical configuration13,14,15, and cis-amide-inducing α-chiral side chains have also been shown to induce helicity in aromatic oligoamides16. However, circular dichroism (CD)-spectroscopical evaluation of oligomers containing β-peptoid units with α-chiral side chains have proven inconclusive thus far17,18, and high-resolution structures have been lacking, except for head-to-tail cyclized species19. Nevertheless, β-peptoid units have been incorporated in oligomers showing non-haemolytic antimicrobial20,21,22,23,24, antiplasmodial25 and cell-penetrating26 activities, as well as excellent stability towards proteolytic enzymes22.

Inspired by studies performed using α-peptoid model systems27,28, the tunability of the cis–trans-amide bond equilibria of the tertiary amide bonds in β-peptoids have also been investigated29,30, and building on these insights, here we design β-peptoid oligomers containing N-(S)-1-(1-naphthyl)ethyl side chains for structural evaluation, and report the first high-resolution X-ray crystal structures of helical β-peptoid oligomers, which should enable informed, structure-based design of foldameric materials of this type in the future.

Results

Compound design

Since high-resolution structures of α-peptoids have been successfully obtained for oligomers of just 4–5 residues in length, we envisioned that a hexamer might be sufficient to acquire stabilized folding. Two different α-chiral side chains were chosen (Fig. 1c): the N-(S)-1-phenylethyl (1–5), which has been studied in both α- and β-peptoids, and the N-(S)-1-(1-naphthyl)ethyl (6–10), which was applied in an α-peptoid tetramer structure solved by X-ray crystallography31. The N-(S)-1-phenylethyl side chain, although shown to successfully induce helical conformations in α-peptoids13,14,15,32, does not induce significant control of the amide bond cis–trans equilibrium. It is therefore not entirely surprising that β-peptoid oligomers of this type have not previously been unambiguously shown to establish robust secondary structures. In recent monomer-based model systems, however, we found that the trans-amide conformation was preferred upon trifluoroacetylation of N-(S)-1-phenylethyl monomers30. The effect of this substitution was therefore included in the present investigation (1b–5b) along with the acetylated control compound series 1a–5a. The second series contained the N-(S)-1-(1-naphthyl)ethyl side chain (6a–10d), which was first introduced in β-peptoids33, and later found to strongly induce cis-amide conformations in model systems28,30 as well as in helical31 and ribbon-shaped34 α-peptoids.

Figure 1. Chemical structures.

Figure 1

Open in a new tab

(a) Generic structures of the backbone architectures of peptoids (that is, α-peptoids), β3-peptides (β2- and disubstituted β-peptides are not shown) and β-peptoids. (b) Depiction of the equilibrium of transoid and cisoid amide conformations in peptoid residues. (c) β-Peptoid oligomers prepared for structural and spectroscopic evaluation in this study.

All compounds were prepared by subunit synthesis in solution, essentially as previously described35 (Fig. 2). For the considerably sterically congested naphthyl-containing compounds, in particular, we found the necessary reaction times to increase with the growing length of the oligomer, and found that fragment-based coupling may be necessary for efficient preparation of higher oligomers20 (further synthetic considerations vide infra).

Figure 2. Oligomerization and N-terminal functionalization of β-peptoids.

Figure 2

Open in a new tab

Reagents and conditions: (i) acryloyl chloride, NEt3, THF, 0 °C; (ii) (S)-1-phenylethylamine or (S)-1-(1-naphthyl)ethylamine, MeOH, 50 °C; (iii) AcCl, NEt3, 0 °C; (iv) (CF3CO)2O, NEt3, CH2Cl2, 0→20 °C.

Cis–trans-amide rotamers

1H nuclear magnetic resonance (NMR) spectra of the oligomers exhibited significant signal overlapping due to the identical side chains throughout each series as would be expected. We therefore focused on the shifts corresponding to the side chain methyne protons to determine overall cis–trans-amide bond ratios (Supplementary Figs 1–5; Table 1). NMR data showed no significant trend on the overall cis–trans ratios for the compounds in the N-(S)-1-phenylethyl series (1–5). In the N-(S)-1-(1-naphthyl)ethyl series (6–10), however, increases in Kcis–trans values could be observed upon elongation of the oligomers, as particularly evident for the constants determined for the hexamers in benzene (Table 1). Unfortunately, the two highest oligomers of this series were not sufficiently soluble in acetonitrile to obtain NMR spectra of sufficient quality, but especially for the trifluoroacetylated series, there appears to be a slight increase in Kcis–trans from dimer to tetramer. Taken together, these values may indicate propensity for the oligomers to adopt length- as well as solvent-dependent secondary structures, although high-resolution measurements are required to determine whether this is the case.

Table 1. Overall cis–trans-amide bond ratios.

 
Open in a new tab

X-ray crystallography

Gratifyingly, we were able to crystallize compounds 10a, 10b and 10c by slow evaporation of MeOH–CHCl3 or benzene solutions of the compounds. Diffraction-quality crystals were obtained for 10a and 10c from MeOH–CHCl3, and their structures were solved by X-ray single-crystal structure determination to 1.05 and 1.00 Å resolution, respectively (see Supplementary Figs 6–8 for additional representations).

The N-terminally non-acylated compound 10c was solved first and revealed a helical conformation of precisely three residues per turn and a pitch of ∼9.6 Ångström, with only the N-terminal naphthyl side chain twisted away from the helical axis (Fig. 3a; Supplementary Data 1). The remaining naphthyl groups were highly organized along each of the three faces of the helix to give an equilateral triangle when viewed down the helical axis (Fig. 3b,c). The main helix thus adopts a triangular prism shape, not taking the N-terminal side chain into consideration. We envisioned, based on our monomer studies, that acetylation of the N terminus would also force this amide into a cisoid configuration, and hoped that this would direct the final side chain into alignment along the third face of the molecule. The X-ray crystal structure of compound 10a indeed confirmed this (Fig. 3d; Supplementary Data 2), as this compound crystallized in the R3 space group with only one -CH2CON(1-(1-naphthyl)ethyl)CH2- fragment in the asymmetric unit. Thus, the crystal symmetry generates infinitely long, parallel chains, and this renders the t-butyl group invisible, due to the 1:6 ratio of t-butyl to 1-(1-naphthyl)ethyl.

Figure 3. X-ray crystal structures.

Figure 3

Open in a new tab

(a) Side view of compound 10c. (b,c) End views of compound 10c from the C terminus. The backbone is shown in orange and hydrogen atoms are omitted for clarity. (d) Compound 10a showing the backbone helix as sticks and side chains as lines. (e) Spacefilling representation of compound 10a showing the packing of the naphthyl groups along the phases of the triangular prism-shaped conformation. (f) Crystal packing of compound 10c viewed perpendicular to the helical axis. (g) Crystal packing of compound 10a viewed down the helical axis to demonstrate the highly ordered arrangement. Hydrogen atoms are omitted for clarity except for the spacefilling representation in e. Representations of X-ray crystal structures were prepared using the PyMOL Molecular Graphics System, Schrödinger, LLC.

This results in crystal packing, where the helical segments are arranged in a head-to-tail manner to give regularly elongated triangular threads (Fig. 3g) with a helical pitch of 9.8 Å (Fig. 3d). To reveal the complete molecule, including the N-terminal-acetamido and C-terminal t-butyl ester groups, data sets were collected on several crystals, but attempts to solve the structure in P1 space group were unsuccessful. This packing issue was not observed for compound 10c due to the positioning of the N-terminal side chain, and therefore enabled visualization of the full structure including the C-terminal t-butyl (Fig. 3f).

The torsion angles in the two helices are very similar (Table 2), and the extended structures compare reasonably well with one of the helical conformations previously suggested by density functional theory calculations, albeit with a ∼20-degree difference in the ω and θ angles (Supplementary Table 1)12. To the best of our knowledge, however, the present work provides the first experimental demonstration of the existence of this helical type. Most previously determined helical conformations of a β-peptidic nature have been shown to contain stabilizing hydrogen bond networks7, and investigation of oligomers of homologated proline residues indicated trans-amide-containing conformations36. Our structures are thus unique to the field of foldamers. The highly ordered, tight packing of the side chains along the three faces of the helical axis (Fig. 3e) combined with their strong cis-amide-inducing properties30, suggests that this type of side chain provides a particularly strong stabilization of this novel secondary-structure motif.

Table 2. Torsion angles in the helical structures.

 
Open in a new tab

Furthermore, intramolecular distances indicate CH–π interactions between the backbone methylene group and side chain naphthyl groups, which may also contribute to stabilization and protection of the helical backbone from solvation (Supplementary Fig. 9; Supplementary Table 2). This is in stark contrast to the X-ray crystal structure reported for an α-peptoid tetramer containing the same side chains, where the naphthyl groups pointed away from the helical axis31. In agreement with that structure, however, as well as the findings from our previous monomer investigations, we did not see evidence for stabilizing n→π*Ar interactions in our crystal structure. On the other hand, our cis-amide conformations were in agreement with the recently described n→σ* orbital overlap between carbonyl and side chain methyne atoms observed for peptoids37.

CD and fluorescence spectroscopy

We then evaluated the compounds by CD spectroscopy. The spectra obtained for the acetylated N-(S)-1-phenylethyl series (Fig. 4a,b) were similar to those previously reported for β-peptoids containing this side chain, whereas the N-(S)-1-(1-naphthyl)ethyl series (6a–10a) revealed a minimum at 224–228 nm and a maximum at 215–218 nm (Fig. 4c). At first glance, we were surprised that these Cotton effects decreased with increasing length of the oligomer. However, both the minimum and the maximum were present in the CD spectrum of an acetyled monomer and not of a non-acetylated monomer (Supplementary Fig. 10), which indicates that these signals are not related to secondary-structure formation but rather a signature of the particular naphthyl-containing amide motif itself. Starting at the tetramer length (8a), on the other hand, a positive signal appeared near 232 nm. This signal intensified with growing length of the oligomers, suggesting that this peak may be indicative of length-dependent secondary-structure formation.

Figure 4. CD and fluorescence spectra.

Figure 4

Open in a new tab

(a) CD spectra of compounds 3a–5a; (b) CD spectra of compounds 3b–5b; (c) CD spectra of compounds 6a–10a; and (d) CD spectra of compounds 6b–10b measured at room temperature in acetonitrile (60 μM). (e) Fluorescence emission spectra recorded for compound 10a in acetonitrile or (f) in MeOH–acetonitrile (3:2). Spectra were obtained at room temperature using 60-μM solutions, and the intensities are shown in arbitrary units (a.u.).

We also obtained CD spectra of the trifluoroacetylated oligomers, which exhibited the same overall spectral shapes (Fig. 4d). Notably, six residues were necessary to obtain a positive signal at 232 nm in this series, suggesting that trifluoroacetylation has a negative effect on secondary-structure formation in acetonitrile. In our monomer study, we observed stabilization of the cis-amide conformation upon trifluoroacetylation compared with acetylation30, but this apparently does not translate into a stabilizing effect on the oligomer secondary structure. This may be explained by a steric clash between the bulkier trifluoroacetyl group and the first backbone methylene group at the N terminus.

To assess whether the positive signal at 232 nm is indicative of folding, we also collected CD spectra of both 10a and 10b at temperatures in the range 20–75 °C (Supplementary Fig. 11). The gradual decrease in signal intensity at 232 nm upon heating was indeed in accordance with temperature-mediated denaturation. Importantly, the remaining spectral shape was not affected significantly, which is in accordance with our hypothesis that this is not related to secondary structure. Furthermore, spectra recorded upon cooling were identical to those obtained before heating, indicating refolding of the structures (Supplementary Fig. 12). In addition, we investigated the effect of solvent polarity by obtaining CD spectra of compounds 9a, 10a and 10b in the presence of varying amounts of MeOH (Supplementary Fig. 13). These spectra also showed a decrease in the signal at 232 nm, which is in agreement with denaturation of our structure at gradually increasing MeOH concentrations. Finally, we obtained CD spectra at varying concentrations of 10a (Supplementary Fig. 14), which showed a slight increase of the signal at 232 nm upon dilution. While this was somewhat surprising to us, it suggests that aggregation does not play a role in the formation of secondary structure.

Aggregation of naphthyl-containing side chains in peptoids was recently shown to give rise to CD signals that correlated with fluorescent excimer bands38; thus, to rule out a similar origin of the maxima at 232 nm, we subjected oligomer 10a and dimer 6a to fluorescence measurements. In acetonitrile, the hexameric oligomer displayed a single maximum at ∼336 nm (Fig. 4e) and no change in spectral shape was observed upon addition of methanol, which might promote aggregation due to poorer solubility (Fig. 4f). An excimer band would be expected to appear at a longer wavelength in the emission dimension if aggregates formed, as previously reported for peptoids containing the same type of side chains (392 nm)38. This was not the case for either compound 10a or the dimer 6a (Supplementary Fig. 15), suggesting that the CD maxima observed at 232 nm for our longer oligomers are not a result of excimer effects caused by naphthyl group aggregation.

Structure–folding relationships

Acylation of the N-terminus appeared to have a pronounced effect on folding propensity as indicated by the two X-ray crystal structures (10a versus 10c), as well as the CD spectra (for example, 9a versus 9b). These observations in addition to an interest in being able to introduce additional functionalities in future investigations of the applicability of these oligomers as scaffolds for multivalent display prompted us to prepare modified analogues of 10a. Owing to the challenges associated with synthesis of oligomers by subunit assembly in solution above the hexamer length, we explored two additional strategies to prepare analogues. First, we attempted to transfer the subunit approach to solid support using a ChemMatrix resin with a Rink linker to give oligomers containing C-terminal amides (Fig. 5a). Due to increasing solubility difficulties encountered during purification for acetylated oligomers upon growing length (that is, 10d), we prepared oligomers with free N termini by solid-phase synthesis (10e, 11 and 12). This strategy afforded sufficient material for CD spectroscopic evaluation, but the crude purities observed by analytical high-performance liquid chromatography (HPLC) were not appropriate for synthesis of hetero-oligomers (Supplementary Fig. 16). Thus, it was decided to explore a fragment-based coupling strategy to introduce an alkyne-containing side chain, which could be easily functionalized by Cu(I)-catalyzed Huisgen azide-alkyne cycloaddition39,40 after oligomerization. Indeed, compound 16 was obtained in good yield by solution-phase coupling of two trimer building blocks (Fig. 5b), showing that β-peptoid oligomers may be obtained efficiently by fragment coupling in solution as was also previously demonstrated on solid phase20.

Figure 5. Synthesis and CD spectra of additional analogues.

Figure 5

Open in a new tab

(a) Solid-phase synthesis of homo-oligomers. Reagents and conditions: (i) acryloyl chloride (6 equiv), i-Pr2NEt (12 equiv), DMF, 2 h, RT; (ii) (S)-1-(1-naphthyl)ethylamine (6 equiv), MeOH, 16 h, 50 °C; (iii) only for compound 10d: AcCl (6 equiv), i-Pr2NEt (12 equiv), DMF, 2 h, RT; (iv) trifluoroacetic acid CH2Cl2 (1:1). (b) Fragment coupling in solution to give hetero-oligomeric hexamer 16 (49% isolated yield). Reagents and conditions: HATU (1.1 equiv), i-Pr2NEt (2 equiv), CH2Cl2, 16 h, RT. (c,d) CD spectra measured in MeCN (60 μM).

This additional collection of compounds was evaluated by CD spectroscopy to investigate structural influence on the hypothesized structure indicating Cotton effect at ∼232 nm (Fig. 5c). As evident from the series of different hexamers 10a–e, the combination of N-terminal acetylation and a C-terminal tert-butyl ester of compound 10a gave rise to the most robust signal at 232 nm. Compound 10c, containing a tert-butyl group at the C-terminus and a free N-terminus, displayed an intense Cotton effect at 232 nm similar to compound 10a and more intense than compound 10d, which suggests that the bulky C-terminal esterification is more important for helix formation and/or stabilization than N-terminal acetylation (Fig. 5c).

Compound 10e, which has a C-terminal amide and free N-terminus, exhibited the lowest intensity at 232 nm in this series. However, this signal was gradually rescued upon elongation to heptamer (11) and octamer (12) length, indicating cooperative length-dependent secondary-structure formation (Fig. 5d).

Finally, we were interested in investigating whether side chains could be mutated to other residues than N-(S)-1-(1-naphthyl)ethyl with retention of structural integrity, which would allow for further functionalization of these novel scaffolds. We therefore prepared compound 16 as described above. The CD spectrum of this compound, however, indicated a complete collapse of the secondary structure (Fig. 5d) by exhibiting a shape similar to trimer 7a. While this supports our previously mentioned hypothesis that tight packing of the naphthyl side chains along the helix serves to stabilize the structure, it also shows that more elaborate synthetic efforts are required to achieve funtionalized oligomers with retention of the helical structure. We therefore envision that functional groups should be introduced at the methyl position of the side chains instead.

CD spectroscopy of peptide analogues, however, is not sufficient to derive specific secondary structures41, and although we find it highly likely that our oligomers adopt helical conformations in solution based on our collective results including X-ray, we stress that our current NMR and CD data do not unambiguously verify the presence of such secondary structures. Therefore, we also performed molecular dynamics simulations to address the folding propensity of hexamer 10a in solution.

Molecular dynamics simulations

To lend further theoretical support to the presence and stability of helical structures in solution, we carried out a series of molecular dynamics simulations on hexamer 10a using a graphics processing unit (GPU)-accelerated version of Desmond (v 3.9). The hexamer was built in a helical conformation in maestro v. 9.8 (Schrödinger, LLC, New York, NY, 2014) and treated as previously described42 (see the Methods section for details).

To investigate the influence of temperature, we carried out a series of 250-ns simulations at 200, 250, 300, 350 and 400 K, respectively (Supplementary Figs 17–21). These simulations revealed significant temperature dependence with the ‘low-temperature' regimes (200 and 250 K) showing only few conformations, while the structural ensemble displayed high heterogeneity in the high-temperature regimes (350 and 400 K). In the simulation carried out at 200 K, the hexamer was dominated by a meta-stable folded conformation (root mean squared deviation (r.m.s.d.) ∼4 Å), which was populated for more than 100 ns (Supplementary Fig. 17). When the temperature was raised to 250 K, the structure alternated between the folded and unfolded conformation significantly faster with the meta-stable conformations having lifetimes of 10–30 ns (Supplementary Fig. 18).

The simulation at 300 K exhibited intermediary fluctuations in r.m.s.d. and gyrational radius (RGyr), with conformations similar to the starting point (r.m.s.d.∼2 Å) appearing throughout the simulation (Supplementary Fig. 19). To investigate conformational space at this temperature in more detail, we also performed a longer (1 μs) simulation where low r.m.s.d. and high Rgyr, which is in agreement with helical conformation, were observed within the first 60-ns interval (Fig. 6). Then bent conformations with r.m.s.d.s of up to >6 Å and slightly decreased RGyr (<7 versus 7.5 Å for the helical structure) were observed. A pattern of unfolding and refolding occurred throughout the simulation, with the conformations gradually diverging from the initial X-ray structure until approximately the 500-ns time point. Interestingly, significantly lower r.m.s.d. values reappeared in the later part of the simulation, and overlaying one of the final structures with the X-ray crystal structure of compound 10a revealed an r.m.s.d. for all backbone atoms of just 0.837 Å (Fig. 7).

Figure 6. Molecular dynamics simulation of compound 10a in acetonitrile.

Figure 6

Open in a new tab

The axes show root mean square deviation (r.m.s.d.) and gyrational radius (RGyr) during a 1-μs molecular dynamics (MD) simulation at 300 K. Representative conformations are shown to illustrate the folded and unfolded states of the helical structure throughout the simulation. The simulation is uploaded as Supplementary Movie 1.

Figure 7. Overlays of conformations of compound 10a.

Figure 7

Open in a new tab

(a) Side view of the X-ray crystal structure shown in light grey and the conformation after 1 μs MD simulation shown in blue. Only the backbones are shown as sticks to highlight the similarity. (b–d) End views shown as stick representations. The r.m.s.d. was calculated for all backbone atoms in structural overlays prepared using the ‘pair-fit' command in MacPyMOL, Schrödinger Inc.

Discussion

We report the first examples of high-resolution structures of linear oligomeric β-peptoids, which are also the longest structures of any peptoid oligomer determined by X-ray crystallography to date. These novel helical structures show definitively that the β-peptoids qualify as a valid addition to the already rich ensemble of foldamer designs. Our crystal structures revealed highly regular equilateral triangular prism-shaped conformations in the solid state, which was achieved by synthesis of homomeric hexamers containing the highly cis-amide-inducing side chain, (S)-1-(1-naphthyl)ethylamine. Furthermore, 1H NMR and CD spectroscopic data supported the existence of length-, solvent- and temperature-dependent secondary structures in solution in organic solvents. Although the determination of high-resolution structures of oligomeric β-peptoids in solution will be an interesting future challenge, we here performed molecular dynamics simulations in acetonitrile, which provided further evidence for the formation of helical conformations in solution. Taken together, we demonstrate control of β-peptoid folding for the first time, which now opens the possibility of taking advantage of β-peptoids in design of novel structurally well-defined biomimetic materials. Furthermore, a preliminary structure–folding relationship investigation suggested that a bulky ester substituent at the C-terminus is important for stable folding and, importantly, showed that mutation of an (S)-1-(1-naphthyl)ethylamine side chain to a readily functionalizable acetylene-containing side chain was incompatible with helicity, as indicated by CD spectroscopy. We are therefore currently investigating various strategies to introduce alternative functionalities through substitution at the methyl substituent position of our side chains to ensure structural integrity of these novel scaffolds. We envision that functionalized helical β-peptoids have potential applicability in biomedical research. Well-defined positioning of amino acid side chain functionalities in three dimensions is important for disruption of protein–protein interactions, which account for a number of notoriously difficult-to-inhibit drug targets. The structures provided herein may serve as useful abiotic scaffolds with proteolytic stability in such endeavours. Furthermore, we envision that helical β-peptoids may serve as scaffolds for highly accurate multivalent display of drug molecules in three dimensions to achieve increased binding affinities against targets with multiple binding sites.

Methods

General

All chemicals and solvents were analytical grade and used without further purification. Vacuum liquid chromatography (VLC) was performed on silica gel 60 (particle size 0.015−0.040 mm). Ultra high-performance liquid chromatography (UPLC)-mass spectrometry (MS) analyses were performed on a Phenomenex Kinetex column (1.7 μm, 50 × 2.10 mm) using a Waters Acquity ultra-HPLC system. A gradient with eluent I (0.1% HCOOH in water) and eluent II (0.1% HCOOH in acetonitrile) rising linearly from 0 to 95% of II during t=0.00–5.20 min was applied at a flow rate of 1 ml min−1. Preparative HPLC purification was performed on a C18 Phenomenex Luna column (5 μm, 100 Å, 250 × 20 mm) using an Agilent 1260 LC system equipped with a diode array ultraviolet detector and an evaporative light-scattering detector (ELSD). A gradient with eluent III (water−MeCN−TFA, 95:5:0.1) and eluent IV (0.1% TFA in acetonitrile) rising linearly from 45 to 95% of IV during t=5−35 min, and isocratically at 95% from t=35–55 min was applied at a flow rate of 20 ml min−1. Analytical HPLC was performed on a C18 phenomenex Luna column (3 μm, 100 Å, 150 × 4.60 mm) using an Agilent 1100 series system equipped with a diode array ultraviolet detector. A gradient using eluent III and eluent IV rising linearly from 0 to 80% of IV during t=2−10 min, then from 80 to 95% during t=10–27 min and finally isocratically at 95% IV from t=27–33 min was applied at a flow rate of 1 ml min−1. High-resolution LC-DAD-MS was performed on an Agilent 1,100 system equipped with a photodiode array detector (DAD) and coupled to a LCT orthogonal time-of-flight mass spectrometer (Waters-Micromass, Manchester, UK) with Z-spray electrospray ionization. Two-dimensional NMR spectra were recorded on a Bruker Ascend 400 at 400 MHz for 1H and 100 MHz for 13C. All spectra were recorded at 298 K. Heteronuclear single-quantum coherence spectra were recorded with a relaxation delay of 1.5 s before each scan, a spectral width of 4,800 × 16,600, collecting 4 FIDs and 1,000 × 256 data points. All spectra were recorded at 298 K. Chemical shifts are reported in p.p.m. relative to deuterated solvent peaks as internal standards (δH, C6D6 7.16 p.p.m.; δC, C6D6 128.06 p.p.m., δH, CD3CN 1.94 p.p.m.; δC, CD3CN 1.32 p.p.m.).

General procedure for oligomerization of β-peptoids

The β-peptoids were oligomerized using a procedure closely resembling that reported by Taillefumier et al.35. Briefly, the β-peptoid (1.0 equiv) and NEt3 (1.2 equiv) were dissolved in THF (0.05 M) and cooled to 0 °C. Then acryloyl chloride (1.4 equiv) was added and the reaction was stirred for 1 h. The reaction mixture was filtered and the solids were washed with EtOAc. The combined filtrates were concentrated in vacuo yielding crude acrylamide. The crude acrylamide was dissolved in MeOH (0.1 M), the desired primary amine (2.0 eqiuv) was added and the reaction was stirred for 18 h at 50 °C. In case of the penta- and hexamer of compounds containing N-(S)-1-(1-naphthyl)ethyl side chains, additional amine (2.0 equiv) and stirring for 72 h were needed for the reaction to go to completion. Furthermore, the acrylamide of the N-(S)-1-(1-naphthyl)ethyl-containing pentamer was poorly soluble in MeOH, therefore MeOH–CH2Cl2 (1:3, 0.015 M) was used for the final aza-Michael step. Purification was performed using vacuum liquid silica gel chromatography applying a gradient of MeOH in CH2Cl2 from 0→5%.

General procedure for N-terminal functionalization of β-peptoid oligomers

Acetylation of β-peptoid oligomers was achieved by dissolving the β-peptoid oligomer (1.0 eqiuv) in CH2Cl2 (0.02 M) at 0 °C and then adding Et3N (1.4 equiv) and acetyl chloride (1.2 equiv) under stirring for 1 h. Trifluoroacetylation of β-peptoid oligomers required addition of Et3N (4.0 equiv) and trifluoroacetic anhydride (5.0 equiv) to the β-peptoid solution, which was stirred for 1 h at 0 °C, followed by ambient temperature for 18 h. For both acetylated and trifluoroacetylated compounds, purification could be achieved by evaporation of the solvent in vacuo followed by preparative reversed-phase HPLC. Vacuum liquid silica gel chromatographic (VLC) purification of compounds 6a–10b applying a gradient of 0.2% MeOH in CH2Cl2 from 0→5% was unsuccessful. However, crude 10a and 10b could be redisolved in N,N-dimethylformamide (DMF), and precipitated upon addition of water. The solid product contained only minor impurities, which could be removed using VLC with the above-mentioned gradient. All compounds were purified to >95% homogeneity, as judged by UPLC-MS and analytical HPLC (230 nm). HPLC traces for all oligomers are shown in Supplementary Figs 22 and 23. 1H NMR spectra are included as Supplementary Figs 24–44 and high-resolution mass spectrometry (HRMS) data are reported in Supplementary Table 3.

Subunit synthesis of oligomers 10d, 10e, 11 and 12

A solution of acryloyl chloride (6 equiv) and i-Pr2NEt (12 equiv) in DMF (5 ml) were added to a Rink-amide-functionalized Chem-Matrix resin (1 equiv). After shaking for 3 h, the resin was drained and subsequently washed with DMF (3 × 3 ml), MeOH (3 × 3 ml), and CH2Cl2 (3 × 3 ml). Then a solution of (S)-1-(1-naphthyl)ethylamine (6 equiv) in MeOH (5 ml) was added to the resin that was shaken at 50 °C for 18 h, and then washed as described above. After nine coupling cycles, the crude product was cleaved from the resin using 50% TFA in CH2Cl2 for 2 × 30 min. Due to incomplete couplings it was possible to collect oligomers of 6–8 residues using preparative HPLC (Supplementary Fig. 16). All compounds were purified to >95% homogeneity as judged by UPLC-MS and analytical HPLC (230 nm). 1H NMR spectra are included as Supplementary Figs 45–48 and HRMS data are reported in Supplementary Table 4.

Compound 14

The methylester-protected β-peptoid oligomer could be synthesized in the same manner as the tert-butylesters, starting from methylacrylate. The trimeric oligomer (514 mg, 0.68 mmol, 1 equiv) was dissolved in MeOH (7 ml), and 1 M aq. LiOH (2.7 ml, 2.7 mmol, 4 equiv) was added; the resulting mixture was stirred for 18 h at room temperature. The reaction mixture was poured into CH2Cl2 (100 ml) and washed with 1 M aq. HCl (100 ml), and the aqueous phase was then back extracted with CH2Cl2 (3 × 100 ml). The combined organic phases were dried (MgSO4), filtered and concentrated in vacuo. The compound was used without further purification. Yield: 450 mg (95%); UPLC-MS, tR=2.48 min, m/z [M+H]+ calcd for C47H50N3O5+, 736.4; found 736.9.

Compound 15

The propargyl-containing β-peptoid oligomer could be synthesized by the general procedure described above, using propargyl amine in the third Michael addition. Purification was performed using vacuum liquid silica gel chromatography (2 × 6 cm, CH2Cl2–MeOH, 0.2% gradient from 0→5%) to give the product as a white solid. Yield: 819 mg (19% overall), UPLC-MS: tR=2.00 min, m/z 634.4 ([M+H]+, C20H34N3O4+, calcd 634.8).

Compound 16

Compound 14 (219 mg, 0.32 mmol, 1 equiv), HATU (134 mg, 0.35 mmol, 1.1 equiv) and i-Pr2NEt (111 μl, 0.64 mmol, 2 equiv) were dissolved in CH2Cl2 (25 ml) and preincubated for 10 min at room temperature. Then, compound 15 (200 mg, 0.32 mmol, 1 equiv) was added and the resulting reaction mixture was allowed to stir for 2 h. The solvent was evaporated in vacuo and the crude compound was purified to >95% homogeneity using preparative HPLC. Yield 220 mg (49%). UPLC-MS: tR=3.37 min, m/z [M+H]+ calcd for C83H88N7O7+, 1,351.7; found 1,351.6. HPLC: tR=19.25 min (>95%). HRMS: m/z [M+Na]+ calcd for C87H93N6O8Na+, 1,373.7025; found, 1,373.7019 (ΔM=0.2 p.p.m.). See Supplementary Fig. 49 for a copy of the 1H NMR spectrum.

Crystallization

Selected peptoid hexamers (∼30 mg) were dissolved in a minimum amount of CHCl3, and MeOH was added until precipitation could be observed; sufficient CHCl3 was then added to give clear solutions. The solutions were left for slow evaporation at room temperature, and crystrals were generally formed within a week. The crystals could be removed from the solvent and washed using MeOH. The hexamers (30 mg) also crystalized upon slow evaporation from benzene; however, these specimens were of insufficient quality for X-ray diffraction.

X-ray crystallography

Several crystals of each compound were tested before suitable crystals were found. Measurements were performed at room temperature as cryo cooling turned out to destroy the crystals. Data collection was performed on an Agilent Supernova Diffractometer using CuKα radiation. For crystal 10a, data to 1.00 Å resolution were included and for crystal 10c, data to 1.05 Å resolution were included. Data were processed and scaled using the CrysAlisPro software (Agilent Technologies). Details of the data collection may be found in Supplementary Data 1 and 2.

Compound 10c crystallized in space group P1 with one molecule in the asymmetric unit. The structure was solved using SHELXS and refined using SHELXL43. Due to the rather low resolution, it turned out, however, that geometric restraints had to be included in the refinement. All naphthyl groups were imposed with FLAT and DELU restraints. The N-terminal naphthyl group had rather large thermal parameters and was restrained further using RIGU and ISOR restraints. Furthermore, the tert-butyl group was restrained using DELU, and all six residues were restrained to be similar using a SAME command. In the rather large voids between the helices we observed disordered electron density. The three largest peaks were modelled as oxygen with occupancy of 0.5. Compound 10a, on the other hand, crystallized in space group R3 with one peptoid residue in the asymmetric unit. The structure was solved using SHELXS and refined in SHELXL43. Also here, geometric restraints had to be included in the refinement and the naphthyl group was imposed with FLAT and DELU restraints. The peptoid oligomer was revealed when crystallographic symmetry was imposed. However, the crystal structure generates infinitely long chains and the tert-butyl group was not visible, although for every sixth naphthyl group a tert-butyl group must be present. Hydrogen atoms were included on ideal positions using riding coordinates for both crystals. The data quality did not allow for determination of the absolute configurations, which were imposed in accordance with the stereochemistry of the building blocks used in the synthesis.

CD spectroscopy

Spectra were acquired with an Olis DSM 10 CD spectrophotometer (Olis Inc., Bogart, GA, USA), equipped with a Quantum Systems temperature control module, or on a Jasco 810 spectrometer equipped with a Julabo AWC 100 cooling unit. Spectra were obtained using 1-mm quartz cuvettes, and compound solutions in MeCN were prepared using dry weight of the lyophilized material followed by dilution to give the desired concentrations and solvent combination. The data are averages of 3–5 successive accumulations. Spectra were recorded in millidegree units, corrected for solvent contributions and normalized to mean residue ellipticity [θ]=100ψ/lcn, where ψ is the signal in millidegrees, l is the path length (0.1 cm), c is the concentration in mM and n is the number of peptoid amide bonds.

Fluorescence scanning

Samples were prepared based on dry weight of lyophilized compounds 6a and 10a, respectively. Fluorescence was measured at ambient temperature in a black non-binding NUNC 96-well plate using a Perkin-Elmer (Enspire) multimode plate reader by varying the excitation wavelength (230–290 nm) and measuring emmision (300–500 nm) in steps of 3 nm in both dimensions. The data were plotted using the OriginPro 9.1 software (OriginLab Corporation, Northampton, MA, USA).

Molecular modelling

The structure of 10a, based on the X-ray crystal structure, was solvated in a 15-Å3 custom-built acetonitrile box, and the resulting system was minimized with the default presimulation protocol in Desmond (Desmond Molecular Dynamics System, version 3.4, D. E. Shaw Research, New York, NY, 2013; Maestro-Desmond Interoperability Tools, version 3.4, Schrödinger, 2013) consisting of (i) minimization with solute restraints, (ii) minimization without restraints, (iii) Berendsen NVT simulation at T=10 K with small time steps and restraints on heavy solute atoms, (iv) Berendsen NPT simulation at T=10 K with restraints on heavy solute atoms, (v) Berendsen NPT simulation with restraints on heavy solute atoms and (vi) unrestrained Berendsen NPT simulation44. Then, NPT simulations with periodic boundary conditions were carried out for 250 ns with the Nose–Hoover chain thermostat45,46 set to 300 K and a relaxation time of 1 ps. The Martyna–Tobias–Klein barostat47 was used to regulate pressure to 1 bar with isotropic coupling and a relaxation time of 2 ps. Equations of motion were integrated using the RESPA integrator48 with bonded, near and far, time steps of 2, 2 and 6 femtoseconds, respectively. Non-bonded interactions were subjected to a cutoff of 9 Å. Long-range electrostatics were treated with the smooth-particle mesh Ewald method49 with a tolerance of 10−9. The OPLS-2005 force field50,51 was used to describe both 10a and solvent. All atomic coordinates and corresponding molecular mechanics energies were saved at 25-ps intervals for the entire 250-ns simulation. The structure obtained after the presimulation protocol for the reference simulation at 300 K was also used as an initial structure for additional 250-ns simulations carried out at 200, 250, 350 and 400 K to ease comparison between the different temperatures. Finally, a 1-μs simulation was carried out at 300 K as well. The molecular dynamics trajectories were analysed using visual molecular dynamics52.

Author contributions

J.S.L. and C.A.O. designed the research, analyzed the data and wrote the manuscript with input from all authors. J.S.L. performed syntheses, NMR spectroscopy, CD spectroscopy, compound crystallization and fluorescence measurements. P.H. solved the X-ray crystal structures. P.F. performed the molecular dynamics calculations.

Additional information

Accession codes: Coordinates and structure factors for the X-ray crystal structures of compounds 10a (1054162) and compound 10c (1054163), respectively, are deposited in the Cambridge Crystallographic Data Centre under the accession numbers mentioned above.

How to cite this article: Laursen, J.S. et al. Triangular prism-shaped β-peptoid helices as unique biomimetic scaffolds. Nat. Commun. 6:7013 doi: 10.1038/ncomms8013 (2015).

Supplementary Material

Supplementary Figures, Supplementary Tables and Supplementary References

Supplementary Figures 1-49, Supplementary Tables 1-4 and Supplementary References

ncomms8013-s1.pdf (3.6MB, pdf)
Supplementary Movie 1

Molecular dynamics simulation of compound 10a in acetonitrile at 300 K.

Download video file (15.8MB, mov)
Supplementary Data 1

Crystallographic data for compound 10c

ncomms8013-s3.cif (841.2KB, cif)
Supplementary Data 2

Crystallographic data for compound 10a

ncomms8013-s4.cif (581.5KB, cif)

Acknowledgments

We thank Ms. Anne Hector and Dr Charlotte H. Gotfredsen for assistance with NMR spectroscopy, Ms. Tina Gustafsson for technical assistance with UPLC-MS and Ms. Lise Lotte Berring for assistance with X-ray data collection. We thank Dr S.W. Pedersen and Professor B.B. Kragelund (University of Copenhagen) for assistance with CD spectroscopy and Dr A.S. Madsen for help with the fluorescence scanning. This work was financially supported by DTU (PhD fellowship to J.S.L.), the Danish Independent Research Council|Natural Sciences (Steno Grant no. 10-080907, C.A.O.; Sapere Aude Grant no. 11-105487, P.F.), the Carlsberg Foundation (P.H.; Grant no. 2013_01_0333 to C.A.O.; and Grant no. 2013_01_0489 to P.F.) and the University of Copenhagen (Center for Biopharmaceuticals grant). C.A.O. is a Lundbeck Foundation Fellow.

References

  1. Gellman S. H. Foldamers: A manifesto. Acc. Chem. Res. 31, 173–180 (1998). [Google Scholar]
  2. Goodman C. M., Choi S., Shandler S. & DeGrado W. F. Foldamers as versatile frameworks for the design and evolution of function. Nat. Chem. Biol. 3, 252–262 (2007). [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. Horne W. S. & Gellman S. H. Foldamers with heterogeneous backbones. Acc. Chem. Res. 41, 1399–1408 (2008). [DOI] [PMC free article] [PubMed] [Google Scholar]
  4. Olsen C. A. Peptoid-peptide hybrid backbone architectures. ChemBioChem. 11, 152–160 (2010). [DOI] [PubMed] [Google Scholar]
  5. Horne W. S. Peptide and peptoid foldamers in medicinal chemistry. Exp. Opin. Drug Discov. 6, 1247–1262 (2011). [DOI] [PubMed] [Google Scholar]
  6. Cheng R. P., Gellman S. H. & DeGrado W. F. beta-Peptides: from structure to function. Chem. Rev. 101, 3219–3232 (2001). [DOI] [PubMed] [Google Scholar]
  7. Seebach D., Beck A. K. & Bierbaum D. J. The world of beta- and gamma-peptides comprised of homologated proteinogenic amino acids and other components. Chem. Biodivers. 1, 1111–1239 (2004). [DOI] [PubMed] [Google Scholar]
  8. Seebach D. & Gardiner J. Beta-peptidic peptidomimetics. Acc. Chem. Res. 41, 1366–1375 (2008). [DOI] [PubMed] [Google Scholar]
  9. Simon R. J. et al. Peptoids: a modular approach to drug discovery. Proc. Natl Acad. Sci. USA 89, 9367–9371 (1992). [DOI] [PMC free article] [PubMed] [Google Scholar]
  10. Butterfoss G. L., Renfrew P. D., Kuhlman B., Kirshenbaum K. & Bonneau R. A preliminary survey of the peptoid folding landscape. J. Am. Chem. Soc. 131, 16798–16807 (2009). [DOI] [PubMed] [Google Scholar]
  11. Hamper B. C., Kolodziej S. A., Scates A. M., Smith R. G. & Cortez E. Solid phase synthesis of beta-peptoids: N-substituted beta-aminopropionic acid oligomers. J. Org. Chem. 63, 708–718 (1998). [DOI] [PubMed] [Google Scholar]
  12. Baldauf C., Guenther R. & Hofmann H.-J. Helices in peptoids of alpha- and beta-peptides. Phys. Biol. 3, S1–S9 (2006). [DOI] [PubMed] [Google Scholar]
  13. Kirshenbaum K. et al. Sequence-specific polypeptoids: a diverse family of heteropolymers with stable secondary structure. Proc. Natl Acad. Sci. USA 95, 4303–4308 (1998). [DOI] [PMC free article] [PubMed] [Google Scholar]
  14. Wu C. W., Sanborn T. J., Huang K., Zuckermann R. N. & Barron A. E. Peptoid oligomers with alpha-chiral, aromatic side chains: sequence requirements for the formation of stable peptoid helices. J. Am. Chem. Soc. 123, 6778–6784 (2001). [DOI] [PubMed] [Google Scholar]
  15. Wu C. W., Sanborn T. J., Zuckermann R. N. & Barron A. E. Peptoid oligomers with alpha-chiral, aromatic side chains: effects of chain length on secondary structure. J. Am. Chem. Soc. 123, 2958–2963 (2001). [DOI] [PubMed] [Google Scholar]
  16. Tanatani A. et al. Helical structures of N-alkylated poly(p-benzamide)s. J. Am. Chem. Soc. 127, 8553–8561 (2005). [DOI] [PubMed] [Google Scholar]
  17. Norgren A. S., Zhang S. & Arvidsson P. I. Synthesis and circular dichroism spectroscopic investigations of oligomeric beta-peptoids with alpha-chiral side chains. Org. Lett. 8, 4533–4536 (2006). [DOI] [PubMed] [Google Scholar]
  18. Olsen C. A., Lambert M., Witt M., Franzyk H. & Jaroszewski J. W. Solid-phase peptide synthesis and circular dichroism study of chiral beta-peptoid homooligomers. Amino Acids 34, 465–471 (2008). [DOI] [PubMed] [Google Scholar]
  19. Roy O., Faure S., Thery V., Didierjean C. & Taillefumier C. Cyclic beta-peptoids. Org. Lett. 10, 921–924 (2008). [DOI] [PubMed] [Google Scholar]
  20. Shuey S. W., Delaney W. J., Shah M. C. & Scialdone M. A. Antimicrobial beta-peptoids by a block synthesis approach. Bioorg. Med. Chem. Lett. 16, 1245–1248 (2006). [DOI] [PubMed] [Google Scholar]
  21. Olsen C. A. et al. Alpha-peptide/beta-peptoid chimeras. Org. Lett. 9, 1549–1552 (2007). [DOI] [PubMed] [Google Scholar]
  22. Olsen C. A. et al. Antimicrobial, hemolytic, and cytotoxic activities of beta-peptoid-peptide hybrid oligomers: improved properties compared to natural AMPs. ChemBioChem. 11, 1356–1360 (2010). [DOI] [PubMed] [Google Scholar]
  23. Jahnsen R. D., Frimodt-Møller N. & Franzyk H. Antimicrobial activity of peptidomimetics against multidrug-resistant Escherichia coli: a comparative study of different backbones. J. Med. Chem. 55, 7253–7261 (2012). [DOI] [PubMed] [Google Scholar]
  24. Andreev K. et al. Guanidino groups greatly enhance the action of antimicrobial peptidomimetics against bacterial cytoplasmic membranes. Biochim. Biophys. Acta Biomembr. 1838, 2492–2502 (2014). [DOI] [PMC free article] [PubMed] [Google Scholar]
  25. Vedel L. et al. Antiplasmodial and prehemolytic activities of alpha-peptide-beta-peptoid chimeras. ChemBioChem. 8, 1781–1784 (2007). [DOI] [PubMed] [Google Scholar]
  26. Foged C. et al. Cellular uptake and membrane-destabilizing properties of alpha -peptide/beta -peptoid chimeras: lessons for the design of new cell-penetrating peptides. Biochim. Biophys. Acta Biomembr. 1778, 2487–2495 (2008). [DOI] [PubMed] [Google Scholar]
  27. Gorske B. C., Bastian B. L., Geske G. D. & Blackwell H. E. Local and tunable n->pi* interactions regulate amide isomerism in the peptoid backbone. J. Am. Chem. Soc. 129, 8928–8929 (2007). [DOI] [PubMed] [Google Scholar]
  28. Gorske B. C., Stringer J. R., Bastian B. L., Fowler S. A. & Blackwell H. E. New strategies for the design of folded peptoids revealed by a survey of noncovalent interactions in model systems. J. Am. Chem. Soc. 131, 16555–16567 (2009). [DOI] [PMC free article] [PubMed] [Google Scholar]
  29. Caumes C., Roy O., Faure S. & Taillefumier C. The click triazolium peptoid side chain: a strong cis-amide inducer enabling chemical diversity. J. Am. Chem. Soc. 134, 9553–9556 (2012). [DOI] [PubMed] [Google Scholar]
  30. Laursen J. S., Engel-Andreasen J., Fristrup P., Harris P. & Olsen C. A. Cis-trans amide bond rotamers in beta-peptoids and peptoids: evaluation of stereoelectronic effects in backbone and side chains. J. Am. Chem. Soc. 135, 2835–2844 (2013). [DOI] [PubMed] [Google Scholar]
  31. Stringer J. R., Crapster J. A., Guzei I. A. & Blackwell H. E. Extraordinarily robust polyproline type I peptoid helices generated via the incorporation of alpha-chiral aromatic N-1-naphthylethyl side chains. J. Am. Chem. Soc. 133, 15559–15567 (2011). [DOI] [PMC free article] [PubMed] [Google Scholar]
  32. Armand P. et al. NMR determination of the major solution conformation of a peptoid pentamer with chiral side chains. Proc. Natl Acad. Sci. USA 95, 4309–4314 (1998). [DOI] [PMC free article] [PubMed] [Google Scholar]
  33. Bonke G. et al. Dimeric building blocks for solid-phase synthesis of alpha-peptide-beta-peptoid chimeras. Synthesis 15, 2381–2390 (2008). [Google Scholar]
  34. Crapster J. A., Guzei I. A. & Blackwell H. E. A peptoid ribbon secondary structure. Angew. Chem. Int. Ed. 52, 5079–5084 (2013). [DOI] [PMC free article] [PubMed] [Google Scholar]
  35. Hjelmgaard T. et al. Convenient solution-phase synthesis and conformational studies of novel linear and cyclic alpha,beta-alternating peptoids. Org. Lett. 11, 4100–4103 (2009). [DOI] [PubMed] [Google Scholar]
  36. Abele S., Vogtli K. & Seebach D. Oligomers of beta(2)- and of beta(3)-homoproline: What are the secondary structures of beta-peptides lacking H-bonds? Helv. Chim. Acta 82, 1539–1558 (1999). [Google Scholar]
  37. Gorske B. C., Nelson R. C., Bowden Z. S., Kufe T. A. & Childs A. M. "Bridged" n->pi* interactions can stabilize peptoid helices. J. Org. Chem. 78, 11172–11183 (2013). [DOI] [PubMed] [Google Scholar]
  38. Fuller A. A., Yurash B. A., Schaumann E. N. & Seidl F. J. Self-association of water-soluble peptoids comprising (S)-N-1-(naphthylethyl)glycine residues. Org. Lett. 15, 5118–5121 (2013). [DOI] [PubMed] [Google Scholar]
  39. Tornøe C. W., Christensen C. & Meldal M. Peptidotriazoles on solid phase: [1,2,3]-triazoles by regiospecific copper(I)-catalyzed 1,3-dipolar cycloadditions of terminal alkynes to azides. J. Org. Chem. 67, 3057–3064 (2002). [DOI] [PubMed] [Google Scholar]
  40. Rostovtsev V. V., Green L. G., Fokin V. V. & Sharpless K. B. A stepwise huisgen cycloaddition process: copper(I)-catalyzed regioselective "ligation" of azides and terminal alkynes. Angew. Chem. Int. Ed. 41, 2596–2599 (2002). [DOI] [PubMed] [Google Scholar]
  41. Glattli A., Daura X., Seebach D. & van Gunsteren W. F. Can one derive the conformational preference of a beta-peptide from its CD spectrum? J. Am. Chem. Soc. 124, 12972–12978 (2002). [DOI] [PubMed] [Google Scholar]
  42. Wixe T., Christensen N. J., Lidin S., Fristrup P. & Warnmark K. A short designed semi-aromatic organic nanotube--synthesis, chiroptical characterization, and host properties. Org. Biomol. Chem. 12, 8930–8941 (2014). [DOI] [PubMed] [Google Scholar]
  43. Sheldrick G. M. A short history of SHELX. Acta Crystallogr. A 64, 112–122 (2008). [DOI] [PubMed] [Google Scholar]
  44. Berendsen H. J. C., Postma J. P. M., Vangunsteren W. F., Dinola A. & Haak J. R. Molecular-dynamics with coupling to an external bath. J. Chem. Phys. 81, 3684–3690 (1984). [Google Scholar]
  45. Nose S. A unified formulation of the constant temperature molecular-dynamics methods. J. Chem. Phys. 81, 511–519 (1984). [Google Scholar]
  46. Hoover W. G. Canonical dynamics: equilibrium phase-space distributions. Phys. Rev. A 31, 1695–1697 (1985). [DOI] [PubMed] [Google Scholar]
  47. Martyna G. J., Tobias D. J. & Klein M. L. Constant-pressure molecular-dynamics algorithms. J. Chem. Phys. 101, 4177–4189 (1994). [Google Scholar]
  48. Tuckerman M., Berne B. J. & Martyna G. J. Reversible multiple time scale molecular-dynamics. J. Chem. Phys. 97, 1990–2001 (1992). [Google Scholar]
  49. Essmann U. et al. A smooth particle mesh Ewald method. J. Chem. Phys. 103, 8577–8593 (1995). [Google Scholar]
  50. Tiradorives J. & Jorgensen W. L. Molecular-dynamics of proteins with the Opls potential functions - simulation of the 3rd domain of silver pheasant ovomucoid in water. J. Am. Chem. Soc. 112, 2773–2781 (1990). [Google Scholar]
  51. Banks J. L. et al. Integrated modeling program, applied chemical theory (IMPACT). J. Comput. Chem. 26, 1752–1780 (2005). [DOI] [PMC free article] [PubMed] [Google Scholar]
  52. Humphrey W., Dalke A. & Schulten K. VMD: visual molecular dynamics. J. Mol. Graph. 14, 33–38 (1996). [DOI] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary Figures, Supplementary Tables and Supplementary References

Supplementary Figures 1-49, Supplementary Tables 1-4 and Supplementary References

ncomms8013-s1.pdf (3.6MB, pdf)
Supplementary Movie 1

Molecular dynamics simulation of compound 10a in acetonitrile at 300 K.

Download video file (15.8MB, mov)
Supplementary Data 1

Crystallographic data for compound 10c

ncomms8013-s3.cif (841.2KB, cif)
Supplementary Data 2

Crystallographic data for compound 10a

ncomms8013-s4.cif (581.5KB, cif)

Articles from Nature Communications are provided here courtesy of Nature Publishing Group

RESOURCES