The basal bodies of Chlamydomonas reinhardtii

Abstract

The unicellular green alga, Chlamydomonas reinhardtii, is a biflagellated cell that can swim or glide. C. reinhardtii cells are amenable to genetic, biochemical, proteomic, and microscopic analysis of its basal bodies. The basal bodies contain triplet microtubules and a well-ordered transition zone. Both the mother and daughter basal bodies assemble flagella. Many of the proteins found in other basal body-containing organisms are present in the Chlamydomonas genome, and mutants in these genes affect the assembly of basal bodies. Electron microscopic analysis shows that basal body duplication is site-specific and this may be important for the proper duplication and spatial organization of these organelles. Chlamydomonas is an excellent model for the study of basal bodies as well as the transition zone.

Phylogeny and conservation of proteins

The green lineage or Viridiplantae consists of the green algae, which include Chlamydomonas, the angiosperms (the land plants), and the gymnosperms (conifers, cycads, ginkgos). They are grouped together because they have chlorophyll a and b and lack phycobiliproteins. The green algae together with the cycads and ginkgos have basal bodies and cilia, while the angiosperms and conifers have lost these organelles. The green algae are often referred to as bikonts because they have two flagella. A unikont (eukaryotic cells with a single flagellum) is thought to be the ancestor of choanoflagellates, fungi, and animals [6]. The uniflagellated green alga Micromonas is an example of a unikont [40]. It is possible to identify mutants in three genes in Chlamydomonas that assemble only one flagellum [13, 25, 42, 45, 46].

Many of the basal body and flagellar proteins are conserved across a wide range of organisms by sequence comparisons [1, 33]. A small number of proteins identified by mutational analysis in a variety of organisms are needed to assemble the microtubule core of basal bodies; these include PLK4, SAS6, SAS4, BLD10/CEP135, POC1, Centrin, SPD2/CEP192, Asterless/CEP152; CEP70, delta-tubulin, and epsilon-tubulin. Chlamydomonas has homologs of all of these based on sequence conservation except PLK4, CEP152, and CEP192. Several lines of evidence suggests that CEP152, CEP192, and PLK4 interact [20, 52] and their concomitant absence in several organisms suggests that other mechanisms exist that allow for control of duplication [4]. For the conserved proteins, mutations or knockdown of SAS6, BLD10/CEP135, Centrin, CEP70, delta-tubulin, and epsilon-tubulin affect basal body duplication and assembly in Chlamydomonas as has been observed in other organisms. The proteomic analysis of basal bodies from Chlamydomonas [30] identified multiple POC (proteome of centriole) proteins and many have homologs (see below). Because of this conservation in proteins and structure as described below, Chlamydomonas remains an important model organism for basal body and flagellar research.

Basal body structure

Chlamydomonas cells in interphase have a pair of mature basal bodies and a pair of probasal bodies [5, 22, 29, 48] (Fig. 1). Both mature and probasal bodies have triplet microtubules. The probasal bodies have an average length of 86 nm and the mature basal bodies have an average length of ~400 nm. Both the mature and probasal bodies have a proximal cartwheel. The proximal end of the mature basal bodies contains a ring of amorphous material that is found below the cartwheel [42]. The cartwheel spokes require BLD12/SAS-6 [39] and the spoke tips require BLD10/CEP135 [37]. Spoke tips can still assemble in the absence of BLD12/SAS-6.

Fig. 1.

Electron tomography of Chlamydomonas basal bodies reveals characteristic 3D organization. a Mature basal bodies template the microtubules of the flagella and are held together at the distal end by a distal striated fiber. The transition zone appears as an electron dense H-shaped structure in longitudinal view. TZ denotes the transition zone and DSF denotes the distal striated fiber. b Cross-sectional view showing distal striated fiber connecting mature basal bodies, two probasal bodies and four bundles of rootlet microtubules in a cruciate arrangement. DSF distal striated fiber, TF transition fiber, pBB probasal body, rMT rootlet microtubules. c Diagram showing distinct structural features of Chlamydomonas basal bodies (Reprinted with permission from Molecular Biology of the Cell; [42]). Bar = 200 nm

Cryo-electron tomography and 3D subtomogram averaging of isolated basal bodies at 33 Å resolution reveal additional densities that represent non-tubulin proteins attached to the triplet microtubules, including a large inner circular structure in the basal body lumen [34]. The basal bodies have also been examined by serial thin-section electron microscopy in an elegant study [22]. This study found evidence of rotational symmetry via a structure called the acorn, which is found at the distal end of the triplet microtubules as they transition to the doublet microtubules of the transition zone. It is a filament of about 10 nm that is present on the A-tubules of doublets 1, 7, 8, and 9.

The cartwheel is very dynamic during mitosis. The length of the cartwheel undergoes significant changes during the cell cycle [3]. The cartwheel length in new probasal bodies that assemble during metaphase is ~107 nm and increases to ~163 nm in telophase. The elongated cartwheel may act to stabilize this forming probasal body [41]. In addition, the elongation of the cartwheel is concurrent with the elongation of triplet MTs of the daughter basal body prior to mitosis. Similar to the triplet MTs, the cartwheel in the developing daughter basal body during elongation is also significantly longer than in interphase (137 + 23 vs. 42 + 5 nm, respectively). This additional length could become the excised SAS-6 structure that templates new centrioles as has been observed in mammalian cells [21].

The transition zone, which is ~135 nm long, contains an elaborate stellate pattern in the interior of the microtubule barrel [22, 43, 48] (Fig. 1). These stellate patterns are observed as an osmophilic H-structure in longitudinal TEM sections (Fig. 1, TZ). In the transition zone, the Y-linkers are positioned between the microtubule core and the ciliary membrane. This is the region where CEP290 and NPHP4 localize [2, 7]. In the ciliary membrane there are two sets of intramembranous particles. These are the ciliary necklace and the ciliary bracelet [57] (Fig. 2). The composition of the ciliary necklace and bracelet is not known. The ciliary bracelet has not been observed in other organisms.

Fig. 2.

Quick-freeze deep-etch electron microscopy showing the ciliary necklace composed of many intramembranous particles (red arrow) and the ciliary bracelet (blue arrow). Bar = 200 nm

The analysis of the uni3 mutant was instrumental in the identification of new tubulin isoforms [13]. The Chlamydomonas genome encodes delta, epsilon, and zeta tubulin isoforms. The loss of δ-tubulin results in the loss of triplet microtubules proximally [13, 42], and the loss of ε-tubulin results in the loss of doublet and triplet microtubules [15, 18, 47]. Antibodies to ε-tubulin showed a ring around the basal bodies as well as two projections coming off of each basal body that overlap the rootlet microtubule. Mutants of ζ-tubulin have not been identified [11].

Other structures and fibers

The basal bodies have a variety of associated structures as shown in Fig. 3.

Fig. 3.

Fibers attached to the basal bodies. The mature basal bodies and the probasal bodies are shown as white microtubules with the cartwheel at the proximal region shown in green. The two mature basal bodies are found at an oblique angle to one another and are about 400 nm in length. They are connected at their distal end by the distal striated fiber (red) and connected at the proximal end by the proximal striated fiber (purple). Lateral fibers (yellow) connect the mature basal body to its daughter probasal body via the VFL3 protein. Centrin (in red) is shown in the lumen of the basal body, in the stellate fiber, and in the nucleo-basal body connector (NBBC). The four-rootlet microtubules are shown with the four-membered (M4 and D4) and the two-membered (M2 and D2). One of the rootlet microtubules is associated with a striated fiber that contains SF-assemblin (orange). The transition fibers (blue) are shown on one of the basal bodies but each basal body has nine transition fibers. A microtubule is about 25 nm as an internal scale bar

Transition fibers

These fibers initiate at the beginning of the transition zone when the triplet microtubules become doublet microtubules. The basal body must be anchored to the plasma membrane, and this occurs via transition fibers [5, 12, 48]. The transition fibers are striated and end in knobs at the plasma membrane [43] and are likely to play roles similar to the distal and subdistal appendages of mammalian cells. The transition fibers may also serve as a docking site for intraflagellar transport (IFT) proteins [8]. Of the appendage proteins found in mammals, the Chlamydomonas genome has only CEP164 and CC2D2A.

Rootlet microtubules

The mother and daughter basal bodies are each associated with two microtubules bundles called the rootlet microtubules. Each basal body has a four-membered microtubule and a two-membered microtubule rootlet. The rootlet microtubules are stable and contain acetylated α-tubulin. The rootlets are attached to the basal bodies at specific triplet microtubules and remain associated with the basal bodies during both interphase and mitosis. These microtubules form a cruciate pattern (Fig. 1b).

The rootlet microtubules attached to the basal bodies have at least two functions. The four-membered rootlets mark the cleavage furrow [24]. In mutants with defective basal bodies, the rootlets lose their spatial organization and the cleavage furrow is misplaced relative to the spindle [18, 39]. The four-membered rootlet on the daughter basal body (D4) is also involved in placement of the photosensory eyespot at the end of the mitotic cell cycle. MLT1 localizes to D4 and centrin excludes it from the two-membered daughter rootlet (D2) [38]. Centrin is involved in excluding MLT1 from D2.

SF-assemblin

Striated fibers overlay the two-membered rootlet microtubules and contain the coiled-coil protein, SF-assemblin [32]. SF-assemblin staining is reduced to two dot-like structures at each spindle pole in metaphase, and at telophase new fibers assemble.

Proximal fibers

The composition of these fibers is unknown but they also appear as striated fibers. Two proximal fibers attach the mother and daughter basal body at their proximal ends.

Centrin fibers

This is a calcium-binding protein with EF-hand domains and it is found in several basal body-associated structures. This protein is widely conserved in eukaryotes [4]. Centrin is also found in two patches on the anterior ends of the two-membered microtubule rootlets on the probasal bodies, in the lumen of the basal body, and in the stellate fiber of the transition zone [22]. In addition, centrin is found in the distal striated fibers, and the nucleo-basal body connector.

Distal striated fibers

The mother and daughter basal bodies are connected by a large fiber called the distal striated fiber (DSF), which contain centrin (Fig. 1). The DSF disassembles in mitotic prophase so that the mother and daughter basal bodies can move apart to the opposite sides of the nuclear envelope [31, 41]. The DSF requires triplet microtubules to assemble or attach. Mutations that affect the assembly of triplet microtubules have defects in the assembly/attachment of the DSF [42].

Nucleo-basal body connector

The two NBBCs extend from both basal bodies and connect basal bodies with the nucleus [58]. Centrin missense mutations result in misorientation and missegregation of the basal bodies [36, 58] that result in a variable number of flagella. It is not clear if this is due to the loss of the DSF, the NBBC, or both.

Basal body duplication

In interphase of the mitotic cell cycle, the basal bodies are attached to the plasma membrane and both the mother and the daughter basal bodies assemble flagella. At the beginning of mitosis, the transition zone is severed from the basal body at the proximal end of the transition zone ([41, 44]. The probasal bodies are elongated and new probasal bodies are initiated in association with the two older basal bodies in prophase/metaphase. The new probasal body appears next to triplet microtubules 7 and 8 of the mature basal bodies. This suggests that there is a unique site that is licensed for duplication in a wild-type cell. The new probasal bodies first assemble singlet microtubules from the cartwheel structure. During telophase/cytokinesis when the doublet and triplet microtubules assemble, the microtubules assemble from the distal to the proximal end of the new probasal bodies [41]. PLK4, which is not present in the Chlamydomonas genome, forms a single spot that precedes the duplication of centrioles in mammalian cells [51]. It has been suggested that this localization provides a site for duplication prior to the recruitment of SAS6.

The basal bodies are found near the poles of the spindle, but they do not appear to act as microtubule organizing centers for astral or spindle microtubules. The older basal bodies remain associated with the plasma membrane [22, 41]. At telophase, the Chlamydomonas cell has four mature basal bodies and four probasal bodies. In centrin mutants (vfl2), segregation of the basal bodies is perturbed as discussed above. Cells with no basal bodies and with too many basal bodies have been observed in the centrin mutants [36] or epsilon-tubulin mutant (bld2) [18]. In the bld2 mutant, the spindles appear normal. Basal bodies can be regenerated de novo in the cells lacking basal bodies [36].

There are conflicting results about the presence of basal bodies during meiosis [5, 54]. Triemer and Brown observed the presence of a pair of basal bodies near the nucleus and plasma membrane. Several basal bodies mutants [bld2 (ε-tubulin) and bld10 (CEP135)] have recessive meiotic defects that suggest that basal bodies are needed for the successful completion of meiosis, but it is not known what role these basal bodies play.

Identification of basal body components

Proteomics was performed on isolated basal bodies [30]. In these preparations, chloroplast and mitochondrial proteins accounted for 55/195 proteins identified; some of the unidentified proteins may be from these organelles. Forty-five of the proteins were validated by examining localization to the centrioles in mammalian cells. mRNA levels were increased for 27 proteins and these were named BUG1-BUG27. Several of these are known to have roles in the flagella [27, 28, 50, 59]. Eighteen proteins (POC1-POC18) were postulated to be part of the basal body complex. Two-dimensional gel electrophoresis of basal bodies [10] reveals over 200 proteins in isolated preparations; additional proteomic analysis may be useful to identify additional proteins.

In mitosis, the transition zones are discarded from the basal bodies by severing that occurs at the proximal end of the transition zone [44]. Proteomics of these transition zone remnants have many of the proteins known to be in the transition zone from other organisms. These include CEP290, NPHP1, NPHP4, MKS1, MKS3/TMEM67, MKS6, Tectonic, AHI1, as well as several BBS proteins. The novel proteins that were identified by proteomics are ESCRT proteins. These include VPS4, VPS23, VPS28, VPS37, VPS60, and the exosome maturation protein ALIX/PCDP6IP [9]. Both subunits of katanin were also found [16, 17, 19]. An aminophospholipid transporter is present as well as two proteins with lipoxygenase homology domains (POC2 and MOT51). The cell cycle proteins, CDKA1 and CYCA1, are also present. Mutants of CDKA1 are required to initiate DNA replication in Chlamydomonas [55]. 33 novel proteins were also identified.

Examination of mRNA levels using synchronized cells shows that most of the known basal body genes, POC genes, and 4 BUG genes (BUG18, 23, 24, 27) show a peak increase in their mRNA levels just before cells enter into mitosis [60]. The levels of ε-tubulin, γ-tubulin, BUG25, a coiled-coil protein, POC7 (UNC-119), and MKS1 mRNA increase earlier when many of the genes involved in DNA replication increase. δ-tubulin levels remain high until the cells reenter interphase with the introduction of light. Most of the BUG genes show patterns that are more similar to the pattern observed for flagellar genes. The cluster that is enriched in known basal body and POC genes contain over 1000 transcripts. These may encode additional proteins needed for basal body and transition zone assembly. As might be expected, the ESCRT proteins found in the transition zone are not in the cluster enriched in basal body genes as they are likely to have multiple functions.

Notable basal body findings

The bld2 mutant was the first mutant identified that fails to assemble basal bodies and this result suggested that basal bodies were not essential in Chlamydomonas [14, 23]. The uni3 mutant, which is a deletion of δ-tubulin, provided the first evidence that additional tubulin isoforms are needed for basal body assembly and maintenance [13, 42], and this was supported by the identification that the BLD2 encodes ε-tubulin. The Chlamydomonas BLD12/SAS6 protein was used in the crystallization of SAS6 ([56]). Evidence for de novo assembly of basal bodies came from using vfl mutants [36]. The calcium-binding protein, centrin, was identified in Chlamydomonas [26, 49]. A missense mutation in one of the EF-hand domains of centrin results in loss of several of the basal body-associated fibers [53], while knockdown of the centrin gene resulted in a failure to duplicate basal bodies [31]. Comparative genomics using Chlamydomonas and Drosophila was a key to identifying many basal body and flagellar proteins. This lead to the realization that the proteins mutated in Bardet–Biedl Syndrome (BBS) affected flagellar function [1, 33]. Isolation of basal bodies lead to the identification of POC genes [30]. Isolation of transition zone remnants allows for a further proteomic characterization of this important structural region and the finding that multiple ESCRT proteins at this key structure [9]. The site-specific duplication of new basal bodies on specific microtubules was demonstrated in Chlamydomonas [41].

Strengths and future of basal body research in Chlamydomonas

The strength of Chlamydomonas has come from the ability to use multiple approaches. These include genetics, microscopy, and biochemistry. Chlamydomonas strains are haploid, which makes forward genetics straightforward. In addition, diploid strains can be selected and used for complementation tests. The power of whole genome sequencing has made it easier to use forward genetics to identify new mutations that affect the structure and function of basal bodies and transition zone and then to identify the gene of interest by whole genome sequencing [35]. Most of the known basal body mutants have defects in flagellar assembly; so rapid screens for cells that fail to swim properly can be performed. Basal body mutants that have defects in the triplet microtubules confer supersensitivity to Taxol, so secondary screens can be performed to identify structural mutants [19]. Screens for transition zone mutants are also possible using similar strategies. These mutants can be studied by electron tomography, quick-freeze deep-etch electron microscopy and by proteomics to further understand the assembly pathways for basal bodies and organelles. Since basal bodies are essential to flagellar assembly and function, these studies must include the analysis of the flagellar composition and function as well.

Abbreviations

Å: Angstrom, DSF: Distal striated fiber, NBBC: Nucleo-basal body connector, IFT: Intraflagellar transport, D2: Rootlet microtubule associated with daughter basal body with two microtubules, D4: Rootlet microtubule associated with daughter basal body with four microtubules, M2: Rootlet microtubule associated with mother basal body with two microtubules, M4: Rootlet microtubule associated with mother basal body with four microtubules.

Genetic Acronyms

BBS: Bardet–Biedl Syndrome, BUG: Basal body upregulated gene, BLD: Bald, CC2D2A: Coiled-Coil And C2 Domain Containing 2A, CEP: Centriole proteome, MLT: Multieye, MOT: Present in motile ciliated organisms, MKS: Meckel’s Syndrome, NPHP: Nephronophthsis, POC: proteome of centrioles, SAS: Spindle assembly abnormal, TMEM: Transmembrane protein, UNI: Uniflagellate, VFL: Variable flagellar number, VPS: Vacuolar Protein Sorting-Associated Protein.