Skip to main content
PMC home page
Scientific Reports logoLink to Scientific Reports
. 2020 Apr 30;10:7384. doi: 10.1038/s41598-020-64115-z

Crystal structure of Type IX secretion system PorE C-terminal domain from Porphyromonas gingivalis in complex with a peptidoglycan fragment

Nhung Thi Trang Trinh 1,2,3,4, Hieu Quang Tran 1,2, Quyen Van Dong 3,4, Christian Cambillau 1,2, Alain Roussel 1,2, Philippe Leone 1,2,✉
PMCID: PMC7192894  PMID: 32355178

Abstract

Porphyromonas gingivalis, the major human pathogen associated to periodontal diseases, utilizes the Bacteroidetes-specific type IX secretion system (T9SS) to export virulence factors. PorE is a periplasmic multi-domain lipoprotein associated to the outer membrane that was recently identified as essential for T9SS function. Little is known on T9SS at the structural level, and in particular its interaction with peptidoglycan. This prompted us to carry out structural studies on PorE full length as well as on its four isolated domains. Here we report the crystal structure of the C-terminal OmpA_C-like putative peptidoglycan-binding domain at 1.55 Å resolution. An electron density volume was identified in the protein cleft, making it possible to build a naturally-occurring peptidoglycan fragment. This result suggests that PorE interacts with peptidoglycan and that PorE could anchor T9SS to the cell wall.

Subject terms: X-ray crystallography, Bacterial secretion, Bacterial pathogenesis

Introduction

Periodontal disease, or periodontitis, is a chronic inflammatory disease that destroys periodontal tissue and alveolar bone, representing a major public health concern. The Gram-negative anaerobic bacterium Porphyromonas gingivalis is a pathogen highly associated with periodontal diseases. P. gingivalis can locally invade periodontal tissues, disrupt the tooth-supporting structure and evade the host defense mechanisms. Importantly, several studies have revealed that there are cause-and-effect relationships between periodontal diseases and rheumatoid arthritis, heart disease, diabetes, Alzheimer and other systemic diseases1–7. Tissue damages caused by P. gingivalis infection are mainly induced by a cocktail of specialized toxin proteins secreted by the bacterium, the gingipains8. Several studies have demonstrated that P. gingivalis employs the Type IX secretion system (T9SS) to translocate gingipains across the outer membrane (OM)9,10. Therefore, it is important to gather structure/function data on T9SS to fight P. gingivalis virulence.

T9SS is present in the Fibrobacteres-Chlorobi-Bacteroidetes superphylum (CFB group). It has been mainly studied in the oral pathogen P. gingivalis and in the gliding bacterium F. johnsoniae. The P. gingivalis T9SS recruits and delivers virulence factors, such as gingipains, to attack to the host periodontal cells, while the F. johnsoniae T9SS secretes adhesins that promote gliding motility. Effectors secreted by the T9SS use a two-step mechanism. Substrate proteins have cleavable N-terminal signal peptides that target them first to the Sec translocon for export across the inner membrane (IM). They also harbour a conserved carboxy-terminal domain (CTD) comprising approximately 80 residues that is necessary for recruitment to and transport across the OM by the T9SS11. T9SS is composed of at least 14 different proteins. Worth noticing, the location of the P. gingivalis T9SS subunits have been determined within the cell envelope: two are IM embedded proteins (PorL and PorM), six are OM embedded proteins (PG0189, PorT, PorP, Sov, PorV and PorQ), five are OM-associated proteins (PorE, PorK, PorW, PorU and PorZ) and one is a periplasmic protein (PorN)10,12–19. However, few is known at the structural level. It has been shown by cryo-electron microscopy (cryo-EM) that PorK and PorN polymerize to form a large ring-shaped complex20. Recently, the crystal structures of the periplasmic domain of PorM from P. gingivalis and its homologue GldM from F. johnsoniae have been solved21, proposing a schematic model of their function. Finally, the cryo-EM structure of the SprA protein (Sov homolog in F. johnsoniae) was solved in complex with its partner proteins, PorV, PPI (lipoprotein peptidyl-prolyl cis-trans isomerase) and Plug protein22. The structure showed that SprA folds as a large 36-strand single polypeptide transmembrane β−barrel. This β−barrel is gated by a plug and displays a lateral opening that might be important for effector translocation.

In 2016, a new T9SS subunit was identified, PorE, initially named PG1058 (Uniprot code F5HF80)17,23. PorE locates in the periplasm and is anchored to the inner leaflet of the OM through its lipid modification17. In the same study, it was shown that PorE is essential for T9SS function. Indeed, the porE mutant in P. gingivalis displays phenotypes characteristic of non-functional T9SS: defect in colonial pigmentation, defect in surface-associated proteolytic activity and absence of a visible electron dense surface layer (EDSL) containing gingipains and other substrate proteins by cryo-EM17. Sequence analysis and computer modelling indicated that PorE could be divided into four domains: i) a tetratricopeptide repeat domain (TPR, residues 25–149); ii) a β–propeller domain (WD40, residues 167–435); iii) a carboxypeptidase regulatory domain-like fold (CRD, residues 441–527) and iv) an OmpA_C-like putative peptidoglycan-binding domain (residues 534–668). The TPR and WD40 domains present at the N-terminus of PorE are structural scaffolds often involved in protein-protein interactions24,25, suggesting that PorE may have a role as an essential scaffold linking the periplasmic and OM components of the T9SS. The OmpA-like C-terminus domain is similar to peptidoglycan binding proteins in other bacteria, suggesting that PorE N- to C-terminus could establish a bridge between the OM and the peptidoglycan.

Peptidoglycan (PG) is the major component of the bacterial cell wall and shapes the cell by giving structural strength. PG is a polymer consisting of repeating disaccharide units of N -acetylglucosoamine (NAG) and N-acetylmuramic acid (NAM). A PG strand is cross-linked to the other neighbouring PG strands through a pentapeptide stem, which is appended to the NAM moiety. In gram-negative bacteria, L-Ala-γ-D-Glu-meso-DAP-D-Ala-D-Ala is the common pentapeptide, in which DAP represents diaminopimelate, a unique bacterial amino acid26,27. It was shown only recently that P. gingivalis peptidoglycan contains meso-DAP and not the stereochemical variant LL-DAP as believed for a long time28,29. PG is located between the IM and OM of gram-negative bacteria. The OmpA family proteins have been proposed to interact noncovalently with PG30. There are three different groups in the OmpA family proteins: OM proteins (OmpA, NmRmpM, CadF, OprF, and others), PG-associated lipoproteins (Pal, OprL, and others), and proteins associated with large machineries (MotB/MotY, ExeA, TagL, which are associated with the flagellar rotor, the Type II and Type VI secretion systems, respectively)31–34. While OM proteins and PG-associated lipoproteins connect the OM with the PG network and hence stabilize the OM, proteins associated with multiprotein machineries usually help to proper position and immobilize the apparatus35.

In this study we focused on the P. gingivalis PorE T9SS-associated lipoprotein. The full-length mature PorE protein and its four truncated domains were cloned, produced and one domain was crystallized. The crystal structure of the OmpA_C-like putative peptidoglycan-binding domain was solved in complex with a part of the naturally-occurring peptidoglycan peptide stem, bound to each monomer of the tetrameric arrangement in the asymmetric unit.

Results

Structure determination of the PorE OmpA_C-like domain

We attempted to produce the full length PorE as well as the four isolated domains defined by Heath et al.17. The full-length protein and the β–propeller (WD40) domain were insoluble. The production yield of the tetratricopeptide repeat (TPR) domain was very low. By contrast, the carboxypeptidase regulatory domain-like fold (CRD) and the OmpA_C-like putative peptidoglycan-binding constructs were produced in high yield and were soluble.

Crystallization trials were performed with these two domains and crystals were obtained only for the C-terminal OmpA_C-like domain. The crystals belong to the space group C2 with unit-cell parameters a = 208.0 Å, b = 52.2 Å, c = 66.5 Å and α = γ = 90°, β = 108.4°. The structure of the PorE OmpA_C-like domain was solved by single-wavelength anomalous diffraction (SAD) at 1.55 Å resolution (Table 1) using selenomethionine containing protein. The Matthews coefficient calculated with four molecules in the asymmetric unit is 2.38 Å3 Da−1, corresponding to an estimated solvent content of 48.41%. The four molecules present in the asymmetric unit form a tightly packed tetramer that is predicted to be stable in solution by the PDBe PISA server (calculated buried area: 11560 Å2). However, this oligomerization state results from a crystallization artefact as Size-Exclusion Chromatography Multi-Angle Light Scattering (SEC-MALS) analysis indicated that the protein in solution is monomeric with a molecular weight of 17.7 kDa (Fig. S1). The superimposition of the four monomers shows rmsd (root mean square deviation) comprised between 0.3 and 0.6 Å indicating that the four molecules are almost identical.

Table 1.

Data collection and refinement statistics of the PorE OmpA_C-like domain.

Data collection
PDB accession code 6TOP
Space group C 2
a, b, c (Å) 208.0, 52.2, 66.56
α, β, γ (°) 90, 108.4, 90
Resolution (Å)* 49.35–1.55 (1.59–1.55)
Unique reflections* 96340 (5637)
Redundancy* 22 (14)
Completeness (%)* 97.6 (77.6)
I/σ* 19.7 (1.5)
Rmeas (%)* 9.0 (185)
CC1/2 0.999 (0.85)
Mosaicity (°) 0.075
Refinement and model quality
Resolution (Å)* 49.35–1.55 (1.56–1.55)
Reflections* 96279 (1813)
Rfac/Rfree (%) 19.0/21.5
N° atoms:
protein/ligand/ion/water 4825/121/4/756
B-factors (Å2):
protein/ligand/ion/water 34.6/50.3/36.2/45.0
Rmsd: bond (Å)/angle (°) 0.008/0.95
Ramachandran (%):
most favoured 98.83
allowed regions 1.17
outliers 0
Open in a new tab

*Values in parentheses are for the highest-resolution shell.

Overall structure and peptidoglycan binding site

The structure of the OmpA_C-like domain of PorE (residues 534 to 668) consists of a three-stranded β-sheet (β1-3) and five α-helices (α1–5) with connectivity α1β1α2β2α3α4α5β3 (Fig. 1). Helices α1 and α2 pack against the β–sheet on one side while helices α3, α4 and α5 form an insertion between the β2 and β3 strands. Within the SCOP classification, domains of the OmpA-like superfamily comprise a four-stranded β-sheet. In the PorE OmpA-like domain structure, the first β strand is missing and is fortunately replaced by extra residues encoded in the expression vector. Indeed, the −19 to −1 first residues present in the electron density map do not belong to the sequence of PorE as they correspond to the end of the His6 tag and the TEV cleavage site (colored black in the structure).

Figure 1.

Figure 1

Open in a new tab

Overall structure of the PorE OmpA_C-like domain in complex with a peptidoglycan fragment. The PorE OmpA_C-like domain is shown as a ribbon diagram with red α-helices and blue β-sheets; the N- and C-termini are labelled. The N-terminal residues corresponding to the end of the His6 tag and the TEV cleavage site encoded in the expression vector are colored in black. The peptidoglycan fragment (L-Ala-γ-D-Glu-meso-DAP-D-Ala) is displayed in yellow stick format; its omit difference electron density map (blue) is contoured at 3σ. The figure was prepared using PyMOL (version 1.20, https://pymol.org).

To note, the structure of the OmpA_C-like domain features a relatively large bulge containing the two small α-helices, α3 and α4, which are not connected by a disulfide bond as it is the case in some other well-known peptidoglycan-associated proteins, for examples, E. coli OmpA36 or Neisseria meningitides RmpM37.

The surface of the OmpA_C-like domain displays a narrow and deep cavity in which extra electron density was readily visible allowing the building of a naturally-occurring fragment of PG containing four residues of the stem peptide, L-Ala-γ-D-Glu-meso-DAP-D-Ala (Fig. 1). This PG fragment interacts strongly with the protein, principally through the DAP residue, as it remained bound after the whole purification and crystallization process. Indeed, the DAP residue is deeply embedded into the cavity; the carboxylate is engaged in a bidentate salt bridge with the guanidinium NH1 and NH2 of Arg591, and forms hydrogen bonds to the main-chain amide protons of Asp542 and Asp576 (Fig. 2). The NBW of DAP is hydrogen bonded to the main-chain amide proton and the OD1 of Asp576, to the main-chain amide proton of Lys 578, and to the OD1 of Asn584. Furthermore, a hydrophobic contacts network further stabilizes the interaction: Phe541 interacts with DAP and L-Ala, Tyr583 interacts with γ-D-Glu and D-Ala, and Ile587 interacts with DAP (Fig. 2).

Figure 3.

Figure 3

Open in a new tab

Sequence alignment of the PorE OmpA_C-like domain with other representative OmpA family proteins. Secondary structure elements and numeration from the OmpA_C-like domain of PorE structure are displayed above the alignment. Strictly conserved residues are in red blocks; the three residues of the PorE OmpA_C-like domain whose side chains are involved in hydrogen bonds with the peptidoglycan fragment are indicated by an asterisk. 4G4V: peptidoglycan-associated lipoprotein (PAL) from Acinetobacter baumannii; 3TD5, OmpA family protein from Acinetobacter baumannii; 3WPW, flagellar stator coupled protein PomB from Vibrio alginolyticus. Amino acid sequences were aligned using T-Coffee (version 11.00.d625267, http://www.tcoffee.org)50, and the figure was prepared using ESPript (version 3.0, http://espript.ibcp.fr/)51.

Figure 2.

Figure 2

Open in a new tab

Stereo view of the interactions network between the PorE OmpA_C-like domain (white) and the peptidoglycan fragment (yellow). PorE and peptidoglycan residues are labelled in black and white, respectively. Hydrogen bonds are displayed as black dotted lines. Nitrogen and oxygen atoms are displayed in blue and red, respectively. The orientation is the same as in Fig. 1. The figure was prepared using PyMOL (version 1.20, https://pymol.org).

The three residues whose side chains are involved in hydrogen bonds with PG (Asp576, Asn584 and Arg591) are conserved among OmpA family proteins, such as the OmpA and Pal proteins from Acinetobacter baumannii, and the PompB protein from Vibrio alginolyticus (Fig. 4). At the structural level, the residues superimpose and the interaction network is identical, although the structure of PompB contains no ligand in the pocket (Fig. 5).

Figure 4.

Figure 4

Open in a new tab

Superimposition of the PorE OmpA_C-like domain structure with other representative OmpA family proteins (same as in Fig. 3). Structures of the proteins are displayed as a ribbon diagram with worm format; the peptidoglycan (PG) fragments as well as the three conserved residues whose side chain is involved in hydrogen bonds with the PG fragment are displayed in stick format, with nitrogen and oxygen atoms displayed in blue and red, respectively. The protein chains and their bound PG fragments are respectively shown in white and grey (PorE OmpA_C-like domain), yellow and orange (A. baumannii PAL, 4G4V), and blue and cyan (A. baumannii OmpA, 3TD5). V. alginolyticus PomB (3WPW), that contains no PG fragment, is shown in magenta. For clarity purpose, only the PorE OmpA_C-like domain residues are labelled, and the orientation is rotated 90° from Figs. 1 and 2 along the vertical axis. The figure was prepared using PyMOL (version 1.20, https://pymol.org).

Figure 5.

Figure 5

Open in a new tab

Schematic representation of the putative role of PorE in anchoring T9SS to the bacterial cell wall. PorE is a lipoprotein composed of four domains (1: tetratricopeptide repeat domain (TPR), 2: β–propeller domain (WD40), 3: carboxypeptidase regulatory domain-like fold (CRD), and 4: OmpA_C-like putative peptidoglycan-binding domain). Therefore, PorE is anchored to the inner leaflet of the OM through its N-terminal acylation, and could interact with the peptidoglycan network through the C-terminal OmpA_C-like domain. Interaction with (a) putative T9SS component(s) could be mediated by the TPR and WD40 domains that are structural scaffolds often involved in protein-protein interactions. The figure was prepared using MICROSOFT PowerPoint (version 16.16.20).

Discussion and Conclusion

Secretion systems in Gram-negative bacteria are large multiprotein complexes comprising proteins from the IM and OM. In this study we focus on the last discovered type IX secretion system (T9SS), a complex translocon only found in species of the Bacteroidetes phylum. To fit the specific needs of each bacterium, T9SSs have evolved to secrete various substrates such as toxins involved in pathogenesis, S-layer to confer protection, or adhesins for gliding motility. A number of researches have shown that more than 14 proteins are involved in this still ambiguous process, with some playing roles in the post-translational modification of T9SS substrate proteins9.

Heath et al.17 have shown that porE inactivation in P. gingivalis caused a loss of cell-associated proteinase activity, while immunoblotting and proteomic analyses revealed that virulence factors precursor proteins accumulated in the periplasm and were not targeted to the membrane. This provided strong evidence that PorE is a component of the T9SS in P. gingivalis essential for the proper secretion of T9SS substrates. Furthermore, sequence analysis revealed that PorE is a lipoprotein anchored in the OM through N-terminal acylation, and is composed of four domains, from N to C-terminal: a tetratricopeptide repeats domain, a five bladed β-propeller domain, a predicted carboxypeptidase regulatory domain-like fold, and an OmpA_C-like domain. The C-terminal domain was predicted to be a peptidoglycan binding protein, suggesting that PorE could connect the OM and the peptidoglycan mesh.

The structure of the C-terminal domain of PorE reported here shows strong three-dimensional evolutionary relationship with known OmpA_C-like domains found in other bacteria. Moreover, a fragment of PG could be built into the electron density. This fragment, containing four residues of the stem peptide (L-Ala-γ-D-Glu-meso-DAP-D-Ala), penetrates deeply in the PG binding groove. Indeed, PG binding in PorE is very similar to that has already been described for other PG binding domain within the OmpA_C-like family. Thus our work brings experimental evidence that PorE interacts with the stem peptide that is present in the PG of P. gingivalis, which suggests that PorE could serve as a bridge between the OM and the PG network (Fig. 4). Interaction of PorE with native PG should be tested, as well as potential interaction with T9SS component(s) to confirm that PorE could anchor T9SS to the cell wall.

As previously pointed out, sequences homologous to PorE are present in 174 species of the Bacteroidetes phylum17. In many species, including P. gingivalis, PorE is unique. For instance, a search with the BLAST program in the genome of Duncaniella muris, a species highly abundant in the murine intestinal tract38 and that potentially possesses a functional T9SS as PorK-L-M-N homologs are present in its genome, results in one PorE homolog. Indeed, this protein shares the same architecture as PorE (46% sequence identity with 98% sequence coverage), it shares the three main residues involved in PG binding, suggesting that it actually interacts with PG, and it is predicted to be a lipoprotein. On the other hand, multiple PorE homologs are present in some species. For instance, fourteen PorE homologs are present in the genome of Tannerella forsythia, another periodontal pathogen39 that potentially possesses a functional T9SS (around 50% sequence identity with more than 95% sequence coverage, conservation of the PG binding residues, and prediction as lipoproteins). Noteworthy, more than twenty PorE homologs are present in the genome of F. johnsoniae (25-30% sequence identity with more than 95% sequence coverage, and conservation of the PG binding residues). However, while these proteins have a signal peptide, except one, suggesting that they are translocated in the periplasm as PorE, none is predicted to be a lipoprotein. Further investigations would be necessary to reveal whether one of these F. johnsoniae proteins could have a function in T9SS homologous to PorE. Nevertheless, this result highlights that anchoring of T9SS into the cell wall might be different in the two bacterial models used for T9SS study, P. gingivalis and F. johnsoniae.

Methods

Cloning, protein expression, purification and analysis

The full length PorE (PGN_1296; Gene accession (gi):188594840) and its four protein domains were cloned using the Restriction Free method40. The full length sequence of PorE except the signal peptide and the first cysteine proposed to be acylated (residues 25–672) was amplified from P. gingivalis ATCC3327 chromosomal DNA using primers 5′-CCGAGAACCTGTACTTCCAATCAAAGAGCGTGAAGTTGAAAGATGCGG and 5′- CGGAGCTCGAATTCGGATCCTTATTATTAACGCAACTCTTCTTCGATCAC. The sequences of PorE individual domains starting from the N-terminus to C-terminus: i) tetratricopeptide repeat domain (TPR, residues 25–149; primers 5′- CCGAGAACCTGTACTTCCAATCAAAGAGCGTGAAGTTGAAAGATGCGG and 5′-CGGAGCTCGAATTCGGATCCTTATTATTCCTTTTGCTGGCGGGCAAAGAG), ii) β–propeller domain (WD40, residues 167–435; primers 5′-CCGAGAACCTGTACTTCCAATCAGACTTCGGCCCGGCCTATGCACCC and 5′-CGGAGCTCGAATTCGGATCCTTATTACAGTTCGAAATGGAAGAGGTGCGG), iii) carboxypeptidase regulatory domain-like fold (CRD, residues 441–527; primers 5′-CCGAGAACCTGTACTTCCAATCAACCGAGATTCAAGGTTATGTGATGG and 5′-CGGAGCTCGAATTCGGATCCTTATTACGATGCAAGGAAAAAGTCCACATA), and iv) OmpA_C-like putative peptidoglycan-binding domain (residues 534–668; primers 5′-CCGAGAACCTGTACTTCCAATCATTGCAAAATATTTTCTATGATTTCGAT and 5′-CGGAGCTCGAATTCGGATCCTTATTATTAACGCAACTCTTCTTCGATCAC) were also amplified from P. gingivalis ATCC3327 chromosomal DNA. All constructs were cloned into the pLIC03 expression vector that is a pET-28a+ derivative (Novagen) carrying a cassette coding for a His6 tag and a Tobacco Etch Virus (TEV) protease-cleavage site followed by the suicide gene sacB flanked by BsaI restriction sites downstream the start codon.

Protein expression was carried out as previously described41. E. coli T7 transformants were grown in TB medium at 37 °C until reaching an Optical Density at λ = 600 nm (OD600nm) of 0.6–0.8. The expression was induced by adding 1 mM IPTG and the bacterial growth was pursued for 18 h at 17 °C. The cells were harvested by centrifugation at 2,500 × g for 15 min at 6 °C and the dried pellet was stored at −80 °C. After thawing, the cell pellet was resuspended in lysis buffer (50 mM Tris-HCl pH 8.0, 300 mM NaCl, 10 mM imidazole, 250 µg.mL−1 lysozyme, 10 µg.mL−1 DNAse, 10 mM MgSO4 and 1 mM PMSF) and the cells were lysed by sonication on ice. The pellet and soluble fractions were separated by centrifugation (16 000 g for 30 min). The His6-tagged protein was purified from the soluble fraction by immobilized metal ion-affinity chromatography using a 5 ml HisTrap Crude (GE Healthcare) Ni2 + -chelating column equilibrated in buffer A (50 mM Tris-HCl pH 8.0, 300 mM NaCl, 10 mM imidazole). The protein was eluted with buffer A supplemented with 250 mM imidazole and was further purified by size-exclusion chromatography (HiLoad 16/60 Superdex 200 Prep Grade, GE Healthcare) equilibrated in 10 mM HEPES pH 7.4, 200 mM NaCl. For crystallization trials, the purified protein was concentrated by centrifugation to 35 mg.mL−1 using an Amicon 10 kDa cut-off concentrator.

For the Size-Exclusion Chromatography Multi-Angle Light Scattering (SEC-MALS) analysis, the purified, concentrated protein was loaded on a Superdex 200 Increase 10/300 GL column (GE Healthcare) equilibrated in 10 mM HEPES pH 7.4, 200 mM NaCl at a flow rate of 0.6 mL.min−1, using an Ultimate 3000 HPLC system (Fischer Scientific). Detection was performed using an eight-angle light-scattering detector (DAWN8, Wyatt Technology) and a differential refractometer (Optilab, Wyatt Technology).

Selenomethionine-labeled (SeMet) OmpA_C-like domain was produced in E. coli T7 cells cultured in SeMet minimal medium42 at 37 °C until reaching an OD600nm of 0.6–0.8. The expression was induced by adding 1 mM IPTG and the bacterial growth was pursued for 18 h at 17 °C. Cell lysis and protein purification were performed with the same protocol as for native OmpA_C-like domain.

Crystallization of the OmpA_C-like domain

Crystallization screens using the purified samples of native and SeMet OmpA_C-like proteins were performed by the sitting-drop vapour diffusion method at 293 K in 96-well Swissci-3 plates with Stura Footprint (Molecular Dimensions), Wizard I and II (Rigaku) and Structure I and II (Molecular Dimensions) screens. The reservoirs of the Swissci-3 plates were filled by a TECAN pipetting robot, and the nanodrops were dispensed by a Mosquito robot (TTP Labtech). Crystals of OmpA_C-like domain appeared in several conditions with polyethylene glycols and sodium ions. The diffraction quality crystals for both native and SeMet OmpA_C-like domains achieved the maximum size after 7 days by mixing the protein solution with 0.1 M sodium acetate, 0.1 M MES pH6.5, and 30% (w/v) PEG 2000. Crystals were mounted in cryo-loops (Hampton CrystalCap Magnetic) and were briefly soaked in crystallization solution supplemented with 20%(v/v) ethylene glycol. The crystals were flash-cooled in a nitrogen-gas stream at 100 K using a home cryocooling device (Oxford Cryosystems).

Data collection and processing, and Accession Code

X-ray diffraction data were collected at Soleil synchrotron Proxima1 beamline and were processed using XDS package43. The structure of the OmpA_C-like domain was determined by single wavelength anomalous diffraction (SAD) using data collected at the selenium X-ray absorption peak (0.97911 Å) from a selenomethione-derived crystal. The substructure determination for four methionine sites and the phase calculation were performed in Phaser44 as embedded in Phenix45. Model building was performed by the multivariate algorithm in Crank2 that simultaneously combines the structure determination steps, including the scaling and extracting the anomalous signal, finding the heavy atom sites, and solvent flattening46. The initial structure model was improved through iterative refinement with AutoBuster47 and manual refitting with COOT48. The validity of the refined structure was assessed by MolProbity49. Data collection and refinement statistics of the PorE OmpA_C-like domain are reported in Table 1. The atomic coordinates and structure factors have been deposited in the Protein Data Bank (PDB) under accession code 6TOP.

Supplementary information

Supplementary information. (159.2KB, docx)

Acknowledgements

We thank the Soleil synchrotron (Saint Aubin, France) for beam time allocation. This work was supported by the Centre National de la Recherche Scientifique and the Aix-Marseille Université, and grants from the Agence Nationale de la Recherche (ANR-15-CE11-0019-01) and the French Infrastructure for Integrated Structural Biology (FRISBI, ANR-10-INSB-05-01). T.T.N.T. doctoral fellowship was supported by Schlumberger Foundation Award (CFn°-907440F) and the Eiffel program from the Ministère Français des Affaires Etrangères (CFn°-861733C).

Author contributions

C.C., A.R., and P.L. designed the study. Q.V.D., N.T.T.T., C.C., A.R., and P.L. contributed to the analysis of data and preparation of the manuscript. N.T.T.T., H.Q.T. and P.L. performed the protein production, characterization, crystallization and crystallographic experiments.

Competing interests

The authors declare no competing interests.

Footnotes

Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Supplementary information

is available for this paper at 10.1038/s41598-020-64115-z.

References

  • 1.Garcia RI, Henshaw MM, Krall EA. Relationship between periodontal disease and systemic health. Periodontol. 2000. 2001;25:21–36. doi: 10.1034/j.1600-0757.2001.22250103.x. [DOI] [PubMed] [Google Scholar]
  • 2.Bahekar AA, Singh S, Saha S, Molnar J, Arora R. The prevalence and incidence of coronary heart disease is significantly increased in periodontitis: A meta-analysis. Am. Heart J. 2007;154:830–837. doi: 10.1016/j.ahj.2007.06.037. [DOI] [PubMed] [Google Scholar]
  • 3.Meyer MS, Joshipura K, Giovannucci E, Michaud DS. A review of the relationship between tooth loss, periodontal disease, and cancer. Cancer Causes Control. 2008;19:895–907. doi: 10.1007/s10552-008-9163-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 4.Singhrao SK, Harding A, Poole S, Kesavalu L, Crean S. Porphyromonas gingivalis Periodontal Infection and Its Putative Links with Alzheimer’s Disease. Mediators Inflamm. 2015;2015:1–10. doi: 10.1155/2015/137357. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 5.Olsen I, Singhrao SK, Potempa J. Citrullination as a plausible link to periodontitis, rheumatoid arthritis, atherosclerosis and Alzheimer’s disease. J. Oral Microbiol. 2018;10:1487742. doi: 10.1080/20002297.2018.1487742. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 6.Eriksson K, et al. Periodontal Health and Oral Microbiota in Patients with Rheumatoid Arthritis. J. Clin. Med. 2019;8:630. doi: 10.3390/jcm8050630. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 7.Perricone C, et al. Porphyromonas gingivalis and rheumatoid arthritis. Curr. Opin. Rheumatol. 2019;31:517–524. doi: 10.1097/BOR.0000000000000638. [DOI] [PubMed] [Google Scholar]
  • 8.Fitzpatrick RE, Wijeyewickrema LC, Pike RN. The gingipains: scissors and glue of the periodontal pathogen, Porphyromonas gingivalis. Future Microbiol. 2009;4:471–87. doi: 10.2217/fmb.09.18. [DOI] [PubMed] [Google Scholar]
  • 9.Veith PD, Glew MD, Gorasia DG, Reynolds EC. Type IX secretion: the generation of bacterial cell surface coatings involved in virulence, gliding motility and the degradation of complex biopolymers. Mol. Microbiol. 2017;106:35–53. doi: 10.1111/mmi.13752. [DOI] [PubMed] [Google Scholar]
  • 10.Sato K, et al. A protein secretion system linked to bacteroidete gliding motility and pathogenesis. Proc. Natl. Acad. Sci. U. S. A. 2010;107:276–81. doi: 10.1073/pnas.0912010107. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 11.Seers CA, et al. The RgpB C-terminal domain has a role in attachment of RgpB to the outer membrane and belongs to a novel C-terminal-domain family found in Porphyromonas gingivalis. J. Bacteriol. 2006;188:6376–86. doi: 10.1128/JB.00731-06. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 12.Chen Y-Y, et al. The outer membrane protein LptO is essential for the O-deacylation of LPS and the co-ordinated secretion and attachment of A-LPS and CTD proteins in Porphyromonas gingivalis. Mol. Microbiol. 2011;79:1380–401. doi: 10.1111/j.1365-2958.2010.07530.x. [DOI] [PubMed] [Google Scholar]
  • 13.Glew MD, et al. PG0026 is the C-terminal signal peptidase of a novel secretion system of Porphyromonas gingivalis. J. Biol. Chem. 2012;287:24605–17. doi: 10.1074/jbc.M112.369223. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 14.Saiki K, Konishi K. Identification of a novel Porphyromonas gingivalis outer membrane protein, PG534, required for the production of active gingipains. FEMS Microbiol. Lett. 2010;310:168–74. doi: 10.1111/j.1574-6968.2010.02059.x. [DOI] [PubMed] [Google Scholar]
  • 15.Nguyen K-A, et al. Verification of a topology model of PorT as an integral outer-membrane protein in Porphyromonas gingivalis. Microbiology. 2009;155:328–37. doi: 10.1099/mic.0.024323-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 16.Saiki K, Konishi K. The role of Sov protein in the secretion of gingipain protease virulence factors of Porphyromonas gingivalis. FEMS Microbiol. Lett. 2010;302:166–74. doi: 10.1111/j.1574-6968.2009.01848.x. [DOI] [PubMed] [Google Scholar]
  • 17.Heath JE, et al. PG1058 Is a Novel Multidomain Protein Component of the Bacterial Type IX Secretion System. Plos One. 2016;11:e0164313. doi: 10.1371/journal.pone.0164313. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 18.Lasica AM, et al. Structural and functional probing of PorZ, an essential bacterial surface component of the type-IX secretion system of human oral-microbiomic Porphyromonas gingivalis. Sci. Rep. 2016;6:37708. doi: 10.1038/srep37708. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 19.Vincent, M. S. et al. Characterization of the Porphyromonas gingivalis Type IX Secretion Trans-Envelope PorKLMNP Core Complex. J. Biol. Chem., jbc.M116.765081, 10.1074/jbc.M116.765081 (2017). [DOI] [PMC free article] [PubMed]
  • 20.Gorasia DG, et al. Structural Insights into the PorK and PorN Components of the Porphyromonas gingivalis Type IX Secretion System. Plos Pathog. 2016;12:e1005820. doi: 10.1371/journal.ppat.1005820. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 21.Leone P, et al. Type IX secretion system PorM and gliding machinery GldM form arches spanning the periplasmic space. Nat. Commun. 2018;9:429. doi: 10.1038/s41467-017-02784-7. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 22.Lauber F, Deme JC, Lea SM, Berks BC. Type 9 secretion system structures reveal a new protein transport mechanism. Nature. 2018;564:77–82. doi: 10.1038/s41586-018-0693-y. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 23.Naito M, Tominaga T, Shoji M, Nakayama K. PGN_0297 is an essential component of the type IX secretion system (T9SS) in Porphyromonas gingivalis: Tn-seq analysis for exhaustive identification of T9SS-related genes. Microbiol. Immunol. 2019;63:11–20. doi: 10.1111/1348-0421.12665. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 24.Zeytuni N, Zarivach R. Structural and functional discussion of the tetra-trico-peptide repeat, a protein interaction module. Structure. 2012;20:397–405. doi: 10.1016/j.str.2012.01.006. [DOI] [PubMed] [Google Scholar]
  • 25.Kopec KO, Lupas AN. β-Propeller blades as ancestral peptides in protein evolution. Plos One. 2013;8:e77074. doi: 10.1371/journal.pone.0077074. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 26.Meroueh SO, et al. Three-dimensional structure of the bacterial cell wall peptidoglycan. Proc. Natl. Acad. Sci. 2006;103:4404–4409. doi: 10.1073/pnas.0510182103. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 27.Cho S, et al. Structural insights into the bactericidal mechanism of human peptidoglycan recognition proteins. Proc. Natl. Acad. Sci. U. S. A. 2007;104:8761–6. doi: 10.1073/pnas.0701453104. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 28.Mayer VMT, et al. Peptidoglycan-type analysis of the N-acetylmuramic acid auxotrophic oral pathogen Tannerella forsythia and reclassification of the peptidoglycan-type of Porphyromonas gingivalis. BMC Microbiol. 2019;19:200. doi: 10.1186/s12866-019-1575-7. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 29.Barnard MR, Holt SC. Isolation and characterization of the peptidoglycans from selected Gram-positive and Gram-negative periodontal pathogens. Can. J. Microbiol. 1985;31:154–160. doi: 10.1139/m85-030. [DOI] [PubMed] [Google Scholar]
  • 30.Leone P, et al. Crystal structure of Drosophila PGRP-SD suggests binding to DAP-type but not lysine-type peptidoglycan. Mol. Immunol. 2008;45:2521–30. doi: 10.1016/j.molimm.2008.01.015. [DOI] [PubMed] [Google Scholar]
  • 31.Park JS, et al. Mechanism of anchoring of OmpA protein to the cell wall peptidoglycan of the gram-negative bacterial outer membrane. FASEB J. 2012;26:219–28. doi: 10.1096/fj.11-188425. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 32.Howard SP, Gebhart C, Langen GR, Li G, Strozen TG. Interactions between peptidoglycan and the ExeAB complex during assembly of the type II secretin of Aeromonas hydrophila. Mol. Microbiol. 2006;59:1062–1072. doi: 10.1111/j.1365-2958.2005.05003.x. [DOI] [PubMed] [Google Scholar]
  • 33.Aschtgen M-S, Gavioli M, Dessen A, Lloubès R, Cascales E. The SciZ protein anchors the enteroaggregative Escherichia coli Type VI secretion system to the cell wall. Mol. Microbiol. 2010;75:886–899. doi: 10.1111/j.1365-2958.2009.07028.x. [DOI] [PubMed] [Google Scholar]
  • 34.Aschtgen M-S, Thomas MS, Cascales E. Anchoring the type VI secretion system to the peptidoglycan: TssL, TagL, TagP… what else? Virulence. 2010;1:535–540. doi: 10.4161/viru.1.6.13732. [DOI] [PubMed] [Google Scholar]
  • 35.Scheurwater EM, Burrows LL. Maintaining network security: how macromolecular structures cross the peptidoglycan layer. FEMS Microbiol. Lett. 2011;318:1–9. doi: 10.1111/j.1574-6968.2011.02228.x. [DOI] [PubMed] [Google Scholar]
  • 36.Ishida H, Garcia-Herrero A, Vogel HJ. The periplasmic domain of Escherichia coli outer membrane protein A can undergo a localized temperature dependent structural transition. Biochim. Biophys. Acta. 2014;1838:3014–24. doi: 10.1016/j.bbamem.2014.08.008. [DOI] [PubMed] [Google Scholar]
  • 37.Grizot S, Buchanan SK. Structure of the OmpA-like domain of RmpM from Neisseria meningitidis. Mol. Microbiol. 2004;51:1027–37. doi: 10.1111/j.1365-2958.2003.03903.x. [DOI] [PubMed] [Google Scholar]
  • 38.Miyake, S., Ding, Y., Soh, M. & Seedorf, H. Complete Genome Sequence of Duncaniella muris Strain B8, Isolated from the Feces of C57/BL6 Mice. Microbiol. Resour. Announc. 8 (2019). [DOI] [PMC free article] [PubMed]
  • 39.Tanner ACR, Izard J. Tannerella forsythia, a periodontal pathogen entering the genomic era. Periodontol. 2000. 2006;42:88–113. doi: 10.1111/j.1600-0757.2006.00184.x. [DOI] [PubMed] [Google Scholar]
  • 40.van den Ent F, Lowe J. RF cloning: a restriction-free method for inserting target genes into plasmids. J Biochem Biophys Methods. 2006;67:67–74. doi: 10.1016/j.jbbm.2005.12.008. [DOI] [PubMed] [Google Scholar]
  • 41.Stathopulos J, Cambillau C, Cascales E, Roussel A, Leone P. Crystallization and preliminary X-ray analysis of the C-terminal fragment of PorM, a subunit of the Porphyromonas gingivalis type IX secretion system. Acta Crystallogr. Sect. F, Struct. Biol. Commun. 2015;71:71–4. doi: 10.1107/S2053230X1402559X. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 42.Guerrero SA, Hecht HJ, Hofmann B, Biebl H, Singh M. Production of selenomethionine-labelled proteins using simplified culture conditions and generally applicable host/vector systems. Appl. Microbiol. Biotechnol. 2001;56:718–23. doi: 10.1007/s002530100690. [DOI] [PubMed] [Google Scholar]
  • 43.Kabsch W. Integration, scaling, space-group assignment and post-refinement. Acta Crystallogr. D. Biol. Crystallogr. 2010;66:133–44. doi: 10.1107/S0907444909047374. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 44.McCoy AJ, et al. Phaser crystallographic software. J. Appl. Crystallogr. 2007;40:658–674. doi: 10.1107/S0021889807021206. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 45.Adams PD, et al. PHENIX: a comprehensive Python-based system for macromolecular structure solution. Acta Crystallogr. D. Biol. Crystallogr. 2010;66:213–21. doi: 10.1107/S0907444909052925. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 46.Skubák P, Pannu NS. Automatic protein structure solution from weak X-ray data. Nat. Commun. 2013;4:2777. doi: 10.1038/ncomms3777. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 47.Blanc E, et al. Refinement of severely incomplete structures with maximum likelihood in BUSTER-TNT. Acta Crystallogr. D. Biol. Crystallogr. 2004;60:2210–21. doi: 10.1107/S0907444904016427. [DOI] [PubMed] [Google Scholar]
  • 48.Emsley P, Lohkamp B, Scott WG, Cowtan K. Features and development of Coot. Acta Crystallogr. D. Biol. Crystallogr. 2010;66:486–501. doi: 10.1107/S0907444910007493. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 49.Chen VB, et al. MolProbity: all-atom structure validation for macromolecular crystallography. Acta Crystallogr. Sect. D Biol. Crystallogr. 2010;66:12–21. doi: 10.1107/S0907444909042073. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 50.Di Tommaso P, et al. T-Coffee: a web server for the multiple sequence alignment of protein and RNA sequences using structural information and homology extension. Nucleic Acids Res. 2011;39:W13–W17. doi: 10.1093/nar/gkr245. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 51.Robert, X. & Gouet, P. Deciphering key features in protein structures with the new ENDscript server. Nucleic Acids Res. 42 (2014). [DOI] [PMC free article] [PubMed]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

Supplementary information. (159.2KB, docx)

Articles from Scientific Reports are provided here courtesy of Nature Publishing Group

RESOURCES