Skip to main content
eLife logoLink to eLife
. 2021 Oct 7;10:e70968. doi: 10.7554/eLife.70968

Inhibition of SARS-CoV-2 polymerase by nucleotide analogs from a single-molecule perspective

Mona Seifert 1,, Subhas C Bera 1,, Pauline van Nies 1, Robert N Kirchdoerfer 2, Ashleigh Shannon 3, Thi-Tuyet-Nhung Le 3, Xiangzhi Meng 4, Hongjie Xia 5, James M Wood 6, Lawrence D Harris 6, Flavia S Papini 1, Jamie J Arnold 7, Steven Almo 8, Tyler L Grove 8, Pei-Yong Shi 9, Yan Xiang 4, Bruno Canard 3, Martin Depken 10, Craig E Cameron 7, David Dulin 1,11,
Editors: Maria Spies12, Aleksandra M Walczak13
PMCID: PMC8497053  PMID: 34617885

Abstract

The absence of ‘shovel-ready’ anti-coronavirus drugs during vaccine development has exceedingly worsened the SARS-CoV-2 pandemic. Furthermore, new vaccine-resistant variants and coronavirus outbreaks may occur in the near future, and we must be ready to face this possibility. However, efficient antiviral drugs are still lacking to this day, due to our poor understanding of the mode of incorporation and mechanism of action of nucleotides analogs that target the coronavirus polymerase to impair its essential activity. Here, we characterize the impact of remdesivir (RDV, the only FDA-approved anti-coronavirus drug) and other nucleotide analogs (NAs) on RNA synthesis by the coronavirus polymerase using a high-throughput, single-molecule, magnetic-tweezers platform. We reveal that the location of the modification in the ribose or in the base dictates the catalytic pathway(s) used for its incorporation. We show that RDV incorporation does not terminate viral RNA synthesis, but leads the polymerase into backtrack as far as 30 nt, which may appear as termination in traditional ensemble assays. SARS-CoV-2 is able to evade the endogenously synthesized product of the viperin antiviral protein, ddhCTP, though the polymerase incorporates this NA well. This experimental paradigm is essential to the discovery and development of therapeutics targeting viral polymerases.

Research organism: Virus

eLife digest

To multiply and spread from cell to cell, the virus responsible for COVID-19 (also known as SARS-CoV-2) must first replicate its genetic information. This process involves a ‘polymerase’ protein complex making a faithful copy by assembling a precise sequence of building blocks, or nucleotides.

The only drug approved against SARS-CoV-2 by the US Food and Drug Administration (FDA), remdesivir, consists of a nucleotide analog, a molecule whose structure is similar to the actual building blocks needed for replication. If the polymerase recognizes and integrates these analogs into the growing genetic sequence, the replication mechanism is disrupted, and the virus cannot multiply. Most approaches to study this process seem to indicate that remdesivir works by stopping the polymerase and terminating replication altogether. Yet, exactly how remdesivir and other analogs impair the synthesis of new copies of the virus remains uncertain.

To explore this question, Seifert, Bera et al. employed an approach called magnetic tweezers which uses a magnetic field to manipulate micro-particles with great precision. Unlike other methods, this technique allows analogs to be integrated under conditions similar to those found in cells, and to be examined at the level of a single molecule.

The results show that contrary to previous assumptions, remdesivir does not terminate replication; instead, it causes the polymerase to pause and backtrack (which may appear as termination in other techniques). The same approach was then applied to other nucleotide analogs, some of which were also found to target the SARS-CoV-2 polymerase. However, these analogs are incorporated differently to remdesivir and with less efficiency. They also obstruct the polymerase in distinct ways.

Taken together, the results by Seifert, Bera et al. suggest that magnetic tweezers can be a powerful approach to reveal how analogs interfere with replication. This information could be used to improve currently available analogs as well as develop new antiviral drugs that are more effective against SARS-CoV-2. This knowledge will be key at a time when treatments against COVID-19 are still lacking, and may be needed to protect against new variants and future outbreaks.

Introduction

SARS-CoV-2 has infected hundreds of million humans worldwide, causing millions of deaths, with numbers still on the rise. We are currently living through the third coronavirus outbreak in less than 20 years, and we are desperately in need of broad-spectrum antiviral drugs that are capable of targeting this emerging family of human pathogens. To this end, nucleotide analogs (NAs) represent a powerful approach, as they target the functionally and structurally conserved coronavirus polymerase, and their insertion in the viral RNA induces either premature termination or a lethal increase in mutations. The coronavirus polymerase is composed of the nsp12 RNA-dependent RNA polymerase (RdRp), and the nsp7 and nsp8 co-factors, with a stoichiometry of 1:1:2 (Kirchdoerfer and Ward, 2019; Hillen et al., 2020; Gao et al., 2020; Wang et al., 2020). This polymerase is thought to associate with several additional viral proteins, including the nsp13, a 5′-to-3′ RNA helicase (Chen et al., 2020; Yan et al., 2020), and the nsp14, a 3′-to-5′ exoribonuclease (Agostini et al., 2018; Bouvet et al., 2012; Ferron et al., 2018; Ogando et al., 2019; Subissi et al., 2014; Eckerle et al., 2007). The latter proofreads the terminus of the nascent RNA following synthesis by the polymerase and associated factors (Robson et al., 2020), a unique feature of coronaviruses relative to all other families of RNA viruses. Proofreading likely contributes to the stability of the unusually large, ~30 kb, coronavirus genome. In addition, proofreading may elevate the tolerance of coronaviruses to certain NAs (e.g., ribavirin; Smith et al., 2013) and therefore should be considered in the development of potent NAs. In other words, nsp14 adds another selection pressure on NAs: not only they must be efficiently incorporated by nsp12, they must also evade detection and excision by nsp14. Remdesivir (RDV) is a recently discovered NA that showed efficacy against Ebola infection (Siegel et al., 2017) and has been successfully repurposed for the treatment of SARS-CoV-2 infection (Agostini et al., 2018; Gordon et al., 2020a; Gordon et al., 2020b; Pruijssers and Denison, 2019; Jockusch et al., 2020; Chien et al., 2020). The success of RDV relies on its efficient incorporation by the polymerase (Gordon et al., 2020b; Dangerfield et al., 2020) and probable evasion of the proofreading machinery (Agostini et al., 2018). Understanding how RDV achieves these two tasks, will help to guide the rational design of more efficacious NAs for the current and future outbreaks. To this end, it is essential to build a comprehensive model describing the selection and incorporation mechanisms that control the utilization of NAs by the coronavirus polymerase and to define the determinants of the base and ribose responsible for selectivity and potency. We have therefore compared several analogs of the same natural nucleotide to determine how the nature of the modifications changes selection/mechanism of action. Magnetic tweezers permit the dynamics of an elongating polymerase/polymerase complex to be monitored in real time and the impact of NAs to be monitored in the presence of all four natural nucleotides in their physiological concentration ranges. Here, we present a magnetic tweezers assay to provide insights into the mechanism and efficacy of current and underexplored NAs on the coronavirus polymerase.

Results

Monitoring SARS-CoV-2 RNA synthesis at the single-molecule level

To enable the observation of rare events, such as nucleotide mismatch and NA incorporation, even in the presence of saturating NTP concentration, we have developed a single-molecule, high-throughput, magnetic tweezers assay to monitor SARS-CoV-2 RNA synthesis activity at near single base resolution (Dulin et al., 2017). A SARS-CoV-2 polymerase formed of nsp12, nsp7, and nsp8 (Figure 1—figure supplement 1A) assembles and initiates RNA synthesis at the 3′-end of the magnetic bead-attached handle, and converts the 1043 nt long single-stranded (ss) RNA template into a double-stranded (ds) RNA in the presence of NTPs and at constant force, that is, 35 pN if not mentioned otherwise (Figure 1—figure supplement 1B–D; see Materials and methods). The conversion from ssRNA to dsRNA displaces the magnetic bead along the vertical axis and directly informs on the number of incorporated nucleotides (Figure 1A, see Materials and methods; Dulin et al., 2015a). During each experiment, hundreds of magnetic beads are followed in parallel (Figure 1—figure supplement 1E), yielding dozens of traces of SARS-CoV-2 polymerase activity per experiment (Figure 1B, Figure 1—figure supplement 2A). As previously observed for other viral RdRps (Dulin et al., 2017; Dulin et al., 2015a; Seifert et al., 2020), the traces reveal substantial, heterogeneous dynamics, with bursts of activity interrupted by pauses of duration varying from ~0.5 s to ~60 s in Figure 1B. This dynamic is intrinsic to the polymerase elongation kinetics and does not result from viral proteins exchange (Bera et al., 2021). To extract the elongation kinetics of the SARS-CoV-2 polymerase, we scanned the traces with non-overlapping 10-nt windows to measure the duration of time required to complete the 10 successive nucleotide-incorporation events. Each duration of time has been coined a dwell time, which is the kinetic signature of the rate-limiting event of the 10 nt addition, that is, the 10 nucleotide addition cycles themselves, or a pause (Dulin et al., 2017; Dulin et al., 2015a; Seifert et al., 2020; see Materials and methods). We fitted the distribution of dwell times using the stochastic-pausing model that describes well the kinetics of nucleotide addition of the coronavirus polymerase (Bera et al., 2021) and other viral RdRps (Dulin et al., 2017; Dulin et al., 2015a; Seifert et al., 2020; Dulin et al., 2015b; Figure 1C; see Materials and methods). This model is composed of four distributions: a pause-free nucleotide addition rate, Pause 1, Pause 2, and the backtrack pauses (Figure 1C; see Materials and methods), and fit parameters values extracted from triplicate experiments fall within statistical errors (Figure 1—figure supplement 2B,C). Statistics and all parameter values extracted from the analysis are reported in Supplementary file 1 and Supplementary file 2. SARS-CoV-2 polymerase elongation kinetics is well described by a robust model where the nucleotide addition rate is the kinetic signature of the nucleotide addition burst (NAB) pathway, from which the RdRp stochastically and rarely switches into the slow nucleotide addition (SNA) pathway, and even more rarely into the very slow nucleotide addition (VSNA) pathway, the latter being consistent in rate and probability with mismatch incorporation (Figure 1D; Bera et al., 2021) Pause 1 and Pause 2 are respectively the kinetic signatures of the SNA and VSNA pathways (Figure 1D), while the long-lived pauses relate to a catalytically incompetent polymerase backtrack state, that is, the polymerase diffuses backward on the template strand leading the product strand 3′-end to unwind and exit via the NTP channel without cleavage (see Materials and methods Bera et al., 2021; Malone et al., 2021). Increasing the temperature from 25°C to 37°C, SARS-CoV-2 polymerase reveals a strong temperature dependence, which translates into a twofold decrease in the median replication time (Figure 1E), while not affecting the RNA synthesis product length (Figure 1F). Analyzing the dwell time distribution at 25°C and 37°C (Figure 1G), we extracted a ~2.6-fold enhancement in nucleotide addition rate, from (65.6±0.5)nt.s1 to (169.0±3.8)nt.s1, making the SARS-CoV-2 polymerase the fastest RNA polymerase characterized to date (Figure 1H; Dangerfield et al., 2020; Shannon et al., 2020a). Pause 1 and Pause 2 exit rates also increased by ~3-fold (Figure 1H), whereas their respective probabilities increased by twofold and fivefold (Figure 1—figure supplement 2D). The latter results are rather surprising, as poliovirus and human rhinovirus C RdRps showed only an exit rate increase with no change in probability (Seifert et al., 2020).

Figure 1. SARS-CoV-2 polymerase is a fast and processive RNA polymerase complex.

(A) Schematic of the magnetic tweezers assay to monitor RNA synthesis by the SARS-CoV-2 polymerase complex. A magnetic bead is attached to a glass coverslip surface by a 1043 long ssRNA construct that experiences a constant force F (35 pN if not mentioned otherwise). The polymerase, formed by nsp7, nsp8, and nsp12, assembles at the 3′-end of the RNA strand annealed to the template. The subsequent conversion of the ssRNA template into dsRNA reduces the end-to-end extension of the tether, signaling replication activity. (B) SARS-CoV-2 polymerase activity traces acquired at either 25°C (gray) or 37°C (black), showing bursts of nucleotide addition interrupted by pauses. The inset is a zoom-in of the traces captured in the red square. (C) The dwell times collected from (B) are assembled into a distribution that is fitted using a stochastic pausing model (see Materials and methods; solid lines). The model includes four different probability distribution functions that describe the event that kinetically dominates the dwell time: uninterrupted 10 nucleotide additions (green), exponentially distributed Pause 1 and Pause 2 (blue and cyan, respectively), and the power-law distributed backtrack (red). (D) The dwell time distribution in (C) is described by the viral RdRp kinetic model (adapted from Dulin et al., 2017). Fast nucleotide addition is achieved by the nucleotide addition burst (NAB) pathway with the nucleotide addition rate extracted from (C). Pause 1 and Pause 2 are the kinetic signatures of the slow and very slow nucleotide addition (SNA and VSNA, respectively) pathways, the latter being likely related to nucleotide mismatch incorporation. (E) Total replication time and (F) product length of SARS-CoV-2 polymerase activity traces at either 25°C or 37°C. The median total replication time and the mean product length are indicated above the violin plots, and represented as thick horizontal lines. The error bars represent one standard deviation extracted from 1000 bootstraps. (G) Dwell time distributions of SARS-CoV-2 polymerase activity traces at 25°C (gray circles) and 37°C (black circles) extracted from (B), and their respective fit to the stochastic-pausing model (corresponding solid lines). (H) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates at either 25°C or 37°C (solid and hatched bars, respectively) extracted from (G). The error bars in (C and G) represent one standard deviation extracted from 1000 bootstraps. The error bars in (H) are one standard deviation extracted from 100 bootstraps.

Figure 1.

Figure 1—figure supplement 1. Experimental conditions of SARS-CoV-2 polymerase high throughput magnetic tweezers experiments.

Figure 1—figure supplement 1.

(A) SDS-PAGE analysis of SARS CoV-2 replicase proteins. Shown is a 15% polyacrylamide gel with 2 µg of purified nsp7 (9 kDa), nsp8 (22 kDa), and nsp12 (110 kDa). Broad-range molecular weight markers (Mr) and corresponding molecular weights are indicated. Gel was stained with Coomassie. (B) Schematic of the RNA hairpin construct assembled from hybridizing and ligating single-stranded RNAs. (C) Force as a function of the extension of the RNA hairpin is presented in (A). Increasing and decreasing force ramp represented in gray and black, respectively. The red arrow indicates the extension at 35 pN, the force applied in the measurements unless specified. (D) Force as a function of the extension of the RNA hairpin after conversion into dsRNA. Increasing and decreasing force ramp represented in gray and black, respectively. (E) Typical field of view containing ~450 hairpin tethered magnetic beads in a high throughput magnetic tweezers assay.
Figure 1—figure supplement 1—source data 1. Source image for the SDS-PAGE gel in Figure 1—figure supplement 2A.
Figure 1—figure supplement 2. Selection of SARS-CoV-2 polymerase elongation traces and reproducibility.

Figure 1—figure supplement 2.

(A) SARS-CoV-2 polymerase activity traces acquired at 35 pN and 500 µM NTPs. Slow traces (<0.5% of the total number of events) are discarded from subsequent analysis. (B) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for triplicate experiment acquired at 25 pN and 500 µM NTP. (C) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for triplicate experiment acquired as in (B). (D) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states at either 25°C (solid bars) or 37°C (hatched bars). Error bars in (E, F, D) are one standard deviation extracted from 100 bootstraps.

3′-dATP versus remdesivir-TP: both ATP competitors but two different modes of incorporation

Next, we investigated how the elongation kinetics and the product length of SARS-CoV-2 polymerase were affected by two adenosine analogs, 3′-dATP and RDV-TP (Figure 2—figure supplement 1). 3′-dATP is an obligatory terminator of RNA chain elongation for viral RdRp (Gohara et al., 2004). RDV-TP has also been suggested to cause chain termination but only several cycles of nucleotide addition after its incorporation. If this is the true mechanism of action, then the experimental outcome of the presence of any of these two analogs should be indistinguishable in our assay.

In the presence of 500 µM NTP and 500 µM 3′-dATP, the ability of the SARS-CoV-2 polymerase to reach the end of the template (1043 nt) was compromised (Figure 2A vs. Figure 1B). Indeed, increasing 3′-dATP concentration up to 2000 µM, only reduced the mean product length of SARS-CoV-2 polymerase by ~1.7-fold, from (940±13)nt to (566±33)nt (mean±standard deviation) (Figure 2B), while not affecting the kinetics of RNA synthesis (Figure 2CFigure 2—figure supplement 2A–C).

Figure 2. 3′-dATP is an effective chain terminator for the SARS-CoV-2 polymerase.

(A) SARS-CoV-2 replication traces for 500 µM NTPs and 500 µM 3′-dATP; and (D), for 50 µM ATP, 500 µM all other NTPs and 500 µM 3′-dATP. (B, E) SARS-CoV-2 polymerase product length for the 1043 nt long template using the indicated concentration of ATP, 500 µM of other NTPs, as a function of [3′-dATP]/[ATP]. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (C, F) Replication time for the reaction conditions described in (B, E). The medians are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. In (B, E), the solid lines are the fits of the terminator effective incorporation rate (see Materials and methods). In (A, D), the insets are zoom-in of the replication traces captured in the black square.

Figure 2.

Figure 2—figure supplement 1. Structure of the nucleotide analogs used in this study.

Figure 2—figure supplement 1.

Figure 2—figure supplement 2. SARS-CoV-2 polymerase activity traces kinetics in presence of 3′-dATP.

Figure 2—figure supplement 2.

(A) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 500 µM NTP either without (circles) or with 0.5 mM (triangles), 1 mM (squares), 1.5 mM (diamonds), and 2 mM (pentagons) 3′-dATP. The color code from light to dark gray further highlights the increasing concentration of 3′-dATP. The solid lines represent the fit to the pause-stochastic model. (B) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (A). (C) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (A). (D) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 50 µM ATP, 500 µM of other NTPs, and either without (circles), or with 0.1 mM (triangles), 0.3 mM (squares), 0.5 mM (diamonds), and 1 mM (pentagons) 3′-dATP. The color code from light to dark gray further highlights the increasing concentration of 3′-dATP. The solid lines represent the fit of the pause-stochastic model. (E) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (D). (F) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (D). The error bars in (A, D) represent one standard deviation extracted from 1000 bootstraps and the error bars in (B, C, E, F) represent one standard deviation extracted from 100 bootstraps.
Figure 2—figure supplement 3. Probabilistic model describing the competition for incorporation of a nucleic acid chain terminator NA and natural nucleotide.

Figure 2—figure supplement 3.

From the empty active site state (E), either a terminator (T) or a natural nucleotide (N) can bind through direct competition with the first order binding rates KonT[T] and KonN[N] (solid arrows represent rates), respectively. From the bound states (Tb/Nb), there can be many sub-steps before either incorporating the base with probability 1PcatT/N, or ejecting it from the active site with probability and 1PcatT/N, (dashed arrows represent probabilities).
Figure 2—figure supplement 4. Decreasing the applied tension does not change the effect of nucleotide analogs (NAs) on the SARS-CoV-2 polymerase elongation.

Figure 2—figure supplement 4.

All measurements are done at 25°C. (A) Product length of SARS-CoV-2 polymerase at 50 µM ATP and 500 µM all other NTPs (gray) or 300 µM NA and 50 µM of the competing NTP (purple: 3′-dATP, green: ddhCTP, and blue: Sofosbuvir-TP). The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (B) Dwell time distributions of SARS-CoV-2 polymerase activity traces for 500 µM all NTPs without (gray) or with 100 µM RDV-TP (pink) at 25 pN. The corresponding solid lines are the fit to the pause-stochastic model. (C) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (B). (D) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (B) and Figure 3D. (E) Dwell time distributions of SARS-CoV-2 polymerase activity traces for 500 µM all other NTPs without (gray) or with 300 µM T1106-TP (red). The corresponding solid lines are the fit to the pause-stochastic model. (F) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (E). (G) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (E) and Figure 4D. The error bars in (B, E) represent one standard deviation extracted from 1000 bootstraps and the error bars in (C, E, F, G) represent one standard deviation extracted from 100 bootstraps.

We derived a model to determine the effective incorporation rate γ, that is, the average number of nucleotide addition cycles before terminator incorporation at equimolar concentration of competing natural nucleotide (in the presence of all NTPs) (see Materials and methods, Figure 2—figure supplement 3). This model fits very well to the mean product length as a function of 3′-dATP:ATP stoichiometry (Figure 2B), for example, γ3dATP,500μMATP=(780±64)nt, meaning that the polymerase incorporates on average 780 nt before incorporating one 3′-dATP and terminating RNA synthesis (see Materials and methods). A subsaturating concentration of NTP increases the probability to enter both the SNA and the VSNA pathways (Figure 1D; Bera et al., 2021), that is, Pause 1 and Pause 2 probability, and would increase the effective incorporation rate of 3′-dATP, providing it is incorporated via any of the two SNA states. By decreasing ATP concentration from 500 µM to 50 µM, we indeed observed an increase in Pause 1 and Pause 2 probabilities by more than twofold and threefold, from 0.060±0.002 to 0.149±0.005 and from 0.0033±0.0009 to 0.0115±0.0026, respectively (Figure 2—figure supplement 2A–F). Adding 500 µM of 3′-dATP significantly shortened the traces in comparison to the 500 µM ATP condition (Figure 2A,D). However, the effective incorporation rate of 3′-dATP was identical at both concentrations of ATP, that is, γ3dATP,50μMATP=(777±50)nt (Figure 2E), which indicates that 3′-dATP incorporation is only driven by stoichiometry, despite the significant increase in the SNA (Pause 1) and VSNA (Pause 2) pathways probabilities. Therefore, we conclude that 3′-dATP utilizes the NAB pathway for incorporation (Figure 1D). Of note, the decrease in the median replication time is due to the shortening of the product length from early termination (Figure 2F). Replicating the experiment at a 3′-dATP:ATP stoichiometry of 6 but now at 25 pN showed no significant differences in final product length in comparison to the data acquired at 35 pN (Figure 2E, Figure 2—figure supplement 4A).

RDV-TP is an adenine analog with a 1′-cyano modification that has recently been shown to outcompete ATP for incorporation (Gordon et al., 2020b; Dangerfield et al., 2020; Figure 2—figure supplement 1), while exhibiting a low cytotoxicity (Pruijssers et al., 2020). RDV-TP has been proposed to induce delayed chain termination at i+3 (i being RDV incorporation position) during RNA synthesis by the core polymerase (Gordon et al., 2020a; Gordon et al., 2020b). Adding 100 µM RDV-TP in a reaction buffer containing 500 µM NTPs showed a dramatic increase in the pause density and duration, but most of the traces reached the end of the template (Figure 3A). We indeed observed a final product length largely unaffected at all concentrations of RDV-TP (Figure 3B), while the median time for RNA synthesis increased by more than tenfold (Figure 3C), for RDV-TP concentrations increasing up to 300 µM. Therefore, the RDV-TP mechanism of action is not termination. We then investigated the origin of the pause induced by RDV-TP incorporation using our stochastic-pausing model (Figure 3DFigure 3—figure supplement 1B). While the nucleotide addition rate is unaffected by RDV-TP, all pauses are significantly impacted. The exit rates of Pause 1 and Pause 2 decreased by fourfold and tenfold (Figure 3E), while their probabilities increased by twofold and fourfold, respectively (Figure 3F). Most notably, the backtrack pause probability increased by 28-fold, from 0.0005±0.0001 to 0.0142±0.0015, when increasing RDV-TP concentration up to 300 µM. The backtrack pause probability increase was such that it most likely affected the probability and the exit rates of Pause 1 and Pause 2 above 50 µM RDV-TP (Figure 3F).

Figure 3. Remdesivir-TP (RDV-TP) is not a chain terminator but induces long-lived SARS-CoV-2 polymerase backtrack.

(A) SARS-CoV-2 polymerase activity traces for 500 µM NTPs and 100 µM RDV-TP. The inset is a zoom-in of the polymerase activity traces captured in the black square. (B) SARS-CoV-2 polymerase product length for the 1043 nt long template using the indicated concentration of ATP, 500 µM of other NTPs, as a function of [RDV-TP]/[ATP]. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (C) Replication time for the reaction conditions described in (B). The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (D) Dwell time distributions of SARS-CoV-2 polymerase activity traces for 500 µM NTPs in the absence (gray) or presence of 100 µM RDV-TP (pink). The corresponding solid lines are the fit of the stochastic-pausing model. (E) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for [NTPs]=500 µM and several RDV-TP concentrations. (F) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (E). The error bars in (D) represent one standard deviation extracted from 1000 bootstraps and the error bars in (E, F) represent one standard deviation extracted from 100 bootstrap procedures. (G, H) Examples of deep SARS-CoV-2 backtracks induced by RDV-TP incorporation (top) and traces showing no polymerase activity (bottom). Traces acquired using ultra-stable magnetic tweezers as described in Bera et al., 2021 at 35 pN, 58 Hz acquisition frequency (gray), low-pass filtered at 1 Hz (dark gray), and using a SARS-CoV-2 polymerase reaction buffer containing 10 µM RDV-TP, 50 µM ATP, and 500 µM all other NTPs. The insert in (G) shows a schematic of backtracking polymerase.

Figure 3.

Figure 3—figure supplement 1. SARS-CoV-2 polymerase elongation traces in presence of RDV-TP at 25°C.

Figure 3—figure supplement 1.

(A) Examples of deep SARS-CoV-2 backtracks induced by RDV-TP incorporation (top) and traces showing no polymerase activity (bottom). Traces acquired using ultra-stable magnetic tweezers as described in Bera et al., 2021 at 35 pN, 58 Hz acquisition frequency (gray), low-pass filtered at 1 Hz (dark gray), and using a reaction buffer containing 10 µM RDV-TP, 50 µM ATP, and 500 µM all other NTPs. (B) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 500 µM NTP at 25°C, either without (circles), or with 20 µM (triangles), 50 µM (squares), 100 µM (diamonds), and 300 µM (pentagons) RDV-TP. The color code from light to dark gray further highlights the increasing concentration of RDV-TP. The solid lines represent the fit of the stochastic-pausing model. The error bars represent one standard deviation extracted from 1000 bootstraps.
Figure 3—figure supplement 2. SARS-CoV-1 polymerase activity traces kinetics in presence of RDV-TP.

Figure 3—figure supplement 2.

(A) SARS-CoV-1 polymerase activity traces for 500 µM NTPs and 100 µM RDV-TP. (B) SARS-CoV-1 polymerase product length for the 1043 nt long template using 500 µM NTPs, as a function of [RDV-TP]/[ATP]. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (C) Replication time for the reaction conditions described in (B). The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (D) Dwell time distributions of SARS-CoV-1 polymerase activity traces acquired in the presence of 500 µM NTP, either without (circles), or with 20 µM (triangles), 50 µM (squares), 100 µM (diamonds), and 300 µM (pentagons) RDV-TP. The color code from light to dark gray further highlights the increasing concentration of RDV-TP. The solid lines represent the fit of the stochastic-pausing model. (E) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates from the fit of the dwell time distributions in (B). (F) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (B). The error bars in (D) represent one standard deviation extracted from 1000 bootstraps and the error bars in (E, F) represent one standard deviation extracted from 100 bootstraps.
Figure 3—figure supplement 3. Lower ATP concentration at constant RDV-TP:ATP stoichiometry increases the effects of RDV-TP on SARS-CoV-2 polymerase elongation kinetics.

Figure 3—figure supplement 3.

(A) SARS-CoV-2 polymerase activity traces for 10 µM RDV-TP with 50 µM ATP and 500 µM of the other NTPs. (B) Product length of SARS-CoV-2 polymerase at RDV-TP:ATP stoichiometry of 0/500, 100/500, 0/50, and 10/50. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (C) The replication times for the conditions described in (B). The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation extracted from 1000 bootstraps. (D) Dwell time distributions of SARS-CoV-2 polymerase activity traces for either 50 µM ATP, 500 µM all other NTPs and 10 µM RDV-TP (purple), or at 500 µM all NTPs and 100 µM RDV-TP (pink). The corresponding solid lines are the fit to the stochastic-pausing model. (E) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (B). (F) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (B). The error bars in (D) represent one standard deviation extracted from 1000 bootstraps and the error bars in (E, F) represent one standard deviation extracted from 100 bootstraps.
Figure 3—figure supplement 4. SARS-CoV-2 polymerase activity traces kinetics in presence of RDV-TP at 37°C.

Figure 3—figure supplement 4.

(A) Dwell time distributions of SARS-CoV-2 replication activity acquired in the presence of 500 µM NTP at 37°C without (gray) and with 100 µM RDV-TP (pink). The solid lines represent the fit of the stochastic-pausing model. (B) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates from the fit of the dwell time distributions in (A). (C) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (A). The error bars in (A) represent one standard deviation extracted from 1000 bootstraps and the error bars in (B, C) represent one standard deviation extracted from 100 bootstraps.

As expected, the almost identical SARS-CoV-1 polymerase (Kirchdoerfer and Ward, 2019) demonstrated a similar kinetic signature to RDV-TP incorporation (Figure 3—figure supplement 2A–F, Supplementary file 1), though to a lesser extent, for example, the backtrack probability increased by ~9-fold when raising RDV-TP concentration up to 300 µM versus 28-fold for SARS-CoV-2 polymerase.

To verify whether the applied tension modifies the incorporation kinetics of RDV-TP by the SARS-CoV-2 polymerase, we replicated the experiment using 500 µM NTP and 100 µM RDV-TP at 25 pN, that is, a 10 pN lower force (Figure 2—figure supplement 4B). We did not observe any significant difference between the two experiments at 35 pN and 25 pN (Figure 2—figure supplement 4C,D), indicating that tension does not play a significant role in RDV-TP incorporation.

Using our recently developed ultra-stable magnetic tweezers (Bera et al., 2021), we wanted to directly monitor polymerase backtrack induced by RDV-TP incorporation. To this end, we performed an experiment with 10 µM RDV-TP and 50 µM ATP, keeping all other NTPs at 500 µM (Figure 3GH, Figure 3—figure supplement 1A). We hypothesized that lowering the concentration of ATP, the natural competitor of RDV, would increase the incorporation yield of RDV and therefore polymerase backtrack probability. A close observation of the longest-lived pauses clearly demonstrates polymerase backtrack, as deep as ~30 nt (Figure 3GH, Figure 3—figure supplement 1A), demonstrating that RDV incorporation induces polymerase backtrack, which leads to long-lived pauses.

To verify whether the incorporation of RDV-TP is stoichiometric, we further analyzed the experiment performed at 50 µM ATP, 500 µM all other NTPs, and 10 µM RDV-TP, at 25°C and 35 pN (Figure 3—figure supplement 3A) (coined low ATP and RDV-TP concentrations), that is, the same stoichiometry as 500 µM all NTPs and 100 µM RDV-TP (coined high ATP and RDV-TP concentrations). In absence of RDV-TP, the decrease in ATP concentration from 500 µM to 50 µM increased dramatically Pause 1 and Pause 2 probability by 2.5-fold and 3.5-fold, respectively, while the backtrack pause remained unchanged. The large increase in both Pause 1 and Pause 2 probabilities further disentangled the distribution of these pauses from the backtrack pause, and we therefore did not expect a strong crossover of the latter on the former (as observed at 500 µM all NTPs). We noticed an average product length of (633±30)nt at low ATP and RDV-TP concentrations, that is, a ~30% shorter than for any other conditions presented in Figure 3—figure supplement 3B, even though we acquired data for a much longer duration than at high ATP and RDV-TP concentrations, that is, 11,000 s vs. 1,600 s, respectively. Interestingly, this result resembles what was observed at a 3′-dATP:ATP stoichiometry of ~3 (Figure 2B), indicating that RDV-TP induces what resembles termination at low ATP concentration. We also observed a ~2.3-fold longer median replication time than at high ATP and RDV-TP concentrations (Figure 3—figure supplement 3C), an increase largely underestimated as a large fraction of the traces never reached the end of the template during the measurement (Figure 3—figure supplement 3B). Applying the stochastic-pausing model to the dwell time distribution of the low ATP and RDV-TP concentrations data (Figure 3—figure supplement 3D), we found the nucleotide addition rate unchanged, while Pause 1 and Pause 2 exit rates were lower than in absence of RDV-TP, that is, by 1.4-fold and 2.3-fold, respectively (Figure 3—figure supplement 3E). At low ATP concentration, the probabilities of Pause 1 and Pause 2 were largely unaffected by the presence of RDV-TP, similarly to what was observed at 37°C (Figure 3—figure supplement 3F). Most remarkably, the backtrack pause probability increased dramatically at low ATP and RDV-TP concentrations, even more so than at high ATP and RDV-TP concentrations, that is, 43-fold versus 18-fold, respectively (Figure 3—figure supplement 3F). The main effect of RDV-TP is to increase the backtrack pause probability. In our previous study of the impact of T-1106-TP on poliovirus RdRp, we showed that T-1106 incorporation induces long-lived backtrack pauses that appear as termination in ensemble assays (Dulin et al., 2017). Interestingly, lowering ATP concentration increases the potency of RDV-TP by dramatically increasing the backtrack pause probability. However, we know such a pause is catalytically incompetent (Bera et al., 2021), and therefore the increase of the backtrack probability is an illustration of the effect of RDV-TP incorporation at low nucleotide concentration: the increased energy barrier induced by the steric clash of RDV-TP with the nsp12 serine-861 reduces dramatically the likelihood of a successful forward translocation of the polymerase (Gordon et al., 2020b; Kokic et al., 2021). This likelihood is even further reduced at low NTP concentration, which dramatically increases the probability of polymerase backtrack (Dulin et al., 2015c).

We previously observed that increasing the temperature helped to further disentangle the distributions of the different pauses (Seifert et al., 2020). We therefore performed an experiment at 37°C in the presence of 100 µM RDV-TP and 500 µM all NTPs (Figure 3—figure supplement 4A). The nucleotide addition rate significantly increased with temperature, while this increase was not affected by the presence of RDV-TP (Figure 1H, Figure 3—figure supplement 4B). On the one hand, Pause 1 and Pause 2 exit rates significantly decreased by threefold and ninefold, respectively, when the reaction was performed with RDV-TP (Figure 3—figure supplement 4B). On the other hand, Pause 1 and Pause 2 probabilities were unaffected by the presence of RDV-TP (Figure 3—figure supplement 4C), supporting the notion that the increase in probability in the experiments performed at 25°C was the consequence of the polymerase backtrack pause distribution biasing Pause 1 and Pause 2 distributions (Dulin et al., 2017). The backtrack pause probability still increased by more than sevenfold, that is, from 0.0003±0.0001 to 0.0022±0.0007. The lesser increase in the backtrack pause probability at 37°C (28-fold at 25°C) is consistent with a model where RDV-MP represents a barrier to translocation, which crossing would be facilitated by increasing the thermal energy.

If RDV-TP incorporation resulted in a pause of similar exit rates as Pause 1 and Pause 2, but not mechanistically related to them, we would expect an increase in the probabilities of both pauses. However, in conditions where Pause 1 and Pause 2 distribution were clearly distinguishable from the backtrack pause distribution when having RDV-TP in the reaction buffer, that is, at 37°C and at low ATP concentration, we did not observe an increase in Pause 1 and Pause 2 probabilities. Therefore, we suggest that RDV-TP is incorporated by the SNA and VSNA pathways (Bera et al., 2021), leading to polymerase backtrack when failing at overcoming the increased energy barrier resulting from the clash of RDV-MP with serine-861.

T-1106-TP is incorporated with a low probability via the VSNA state

Pyrazine-carboxamides represent a promising family of antiviral NAs, of which the best-known member is Favipiravir (T-705), recently approved to treat influenza virus infection (Furuta et al., 2009), and considered against SARS-CoV-2. We studied here another member of this family, T-1106 triphosphate (T-1106-TP), which is chemically more stable than T-705, while presenting similar antiviral properties (Dulin et al., 2017; Shannon et al., 2020b). T-1106-TP competes for incorporation against ATP and GTP in a sequence-dependent manner (Dulin et al., 2017; Shannon et al., 2020b). Adding 500 µM of T-1106-TP in a reaction buffer containing 500 µM NTPs significantly increased the number and duration of pauses observed in SARS-CoV-2 RNA synthesis activity traces (Figure 4A), leading to a 2.6-fold increase in median replication time (Figure 4B). For comparison, 50 µM of RDV-TP induced a median replication time as 500 µM T-1106-TP, at the same concentration of competing NTP, suggesting that RDV-TP is better incorporated than T-1106-TP. The final product length was not affected by T-1106-TP, consistent with the T-1106-TP mechanism of action not being terminated (Figure 4C; Dulin et al., 2017). Performing an experiment using the ultra-stable magnetic tweezers assay (Bera et al., 2021) with 500 µM T-1106 and 500 µM all NTPs at 35 pN force, the SARS-CoV-2 polymerase activity traces showed pauses with either a shallow backtrack (Figure 4—figure supplement 1A), that is, ≤10 nt, or no significant backtrack at all (Figure 4—figure supplement 1B).

Figure 4. T-1106-TP incorporation induces pauses of intermediate duration and backtrack.

(A) SARS-CoV-2 polymerase activity traces in the presence of 500 µM NTPs, in the presence of 500 µM T-1106-TP. The inset is a zoom-in of the polymerase activity traces captured in the black square. (B) SARS-CoV-2 replication time for the 1043 nt long template using 500 µM of all NTPs, and the indicated concentration of T-1106-TP. The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (C) SARS-CoV-2 polymerase product length using 500 µM NTPs and the indicated concentration of T-1106-TP. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (D) Dwell time distributions of SARS-CoV-2 polymerase activity traces for 500 µM NTP either without (gray) or with 500 µM (red) T-1106-TP. The corresponding solid lines are the fit to the stochastic-pausing model. (E) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for [NTPs]=500 µM and several T-1106-TP concentrations. (F) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (E). The error bars denote one standard deviation from 1000 bootstraps in (D) and the error bars in (E, F) denote one standard deviation extracted from 100 bootstrap procedures.

Figure 4.

Figure 4—figure supplement 1. SARS-CoV-2 polymerase elongation in presence of T-1106-TP.

Figure 4—figure supplement 1.

Using an ultra-stable magnetic tweezers configuration, we monitored pauses in SARS-CoV-2 polymerase activity traces at 58 Hz camera acquisition frequency (gray; 1 Hz low-pass filtered: dark gray), applying 35 pN force, and in the presence of 500 µM T-1106-TP and 500 µM all NTPs. Top: zoom-in the polymerase activity traces; bottom inactive tether followed simultaneously. (A) Some pauses demonstrate shallow backtracks, (B) while in other pause cases, polymerase backtrack is difficult to confirm given the spatiotemporal resolution of the assay. (C) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 500 µM NTP, either without (circles), or with 20 µM (triangles), 50 µM (squares), 100 µM (diamonds), 300 µM (pentagons), and 500 µM (upside down triangle) T-1106-TP. The color code from light to dark gray further highlights the increasing concentration of T-1106-TP. The solid lines represent the fit of the stochastic-pausing model. The error bars represent one standard deviation extracted from 1000 bootstraps.

Investigating how increasing T-1106-TP concentration affects SARS-CoV-2 RNA synthesis kinetics (Figure 4D, Figure 4—figure supplement 1C), we found that only the Pause 2 exit rate was affected, decreasing by tenfold (Figure 4E). Pause 1 and Pause 2 probabilities remained constant, while the backtrack pauses increased by almost fivefold, though remaining in the low probability range, that is, ~0.002 (Figure 4F). Repeating the experiment at 500 µM NTPs and 300 µM T-1106-TP at 25 pN, we found no difference in comparison to the data acquired at 35 pN (Figure 2—figure supplement 4E–G). Here again, the tension has no significant effect. Our results suggest an incorporation of T-1106-TP only via the VSNA pathway (Figure 1D), which explains its reduced promiscuity relative to RDV-TP, and is less likely than RDV-TP to induce polymerase backtrack upon incorporation. These observations contrast with our previous findings with poliovirus RdRp (Dulin et al., 2017), where T-1106 incorporation induced deep polymerase backtrack. Therefore, the same NA may have a different mechanism of action on different RdRps.

Sofosbuvir-TP is poorly incorporated by the SARS-CoV-2 polymerase

Next, we compared two uridine analog chain terminators, that is, Sofosbuvir and 3′-dUTP. Sofosbuvir presents a fluoro group at the 2′ α-position and a methyl group at the 2′ β-position, and is a non-obligatory chain terminator. Despite its low incorporation rate (Villalba et al., 2020), Sofosbuvir has a proven antiviral effect against hepatitis C virus (HCV) and is an FDA-approved drug to treat HCV infection (Kayali and Schmidt, 2014; Sofia et al., 2010). It is incorporated by SARS-CoV-2 polymerase (Gordon et al., 2020b; Chien et al., 2020), but has no efficacy in infected cells (Xie et al., 2020a). 3′-dUTP lacks a hydroxyl group in 3′ position, and is therefore an obligatory chain terminator.

The presence of 500 µM Sofosbuvir-TP with 500 µM NTP did not affect RNA synthesis by the SARS-CoV-2 polymerase (Figure 5A), while early termination events appeared in the presence of 500 µM 3′-dUTP (Figure 5B). Supporting this visual observation, the mean RNA product length of the SARS-CoV-2 polymerase was unaffected by the presence of Sofosbuvir-TP (Figure 5C). Raising the 3′-dUTP:UTP stoichiometry to 4 reduced the mean product length by almost fivefold, resulting in an effective incorporation rate γ3dUTP,500μMUTP=(151±6)nt (Figure 5D). For both NAs, the replication time was unaffected (Figure 5—figure supplement 1A and Figure 5—figure supplement 2A), as well as SARS-CoV-2 RNA synthesis kinetics (Figure 5—figure supplement 1B–D and Figure 5—figure supplement 2B–D). Reducing the concentration of UTP down to 50 µM while keeping the other NTPs at 500 µM, Sofosbuvir-TP caused few early termination events when increased to 500 µM (Figure 5E). Replacing Sofosbuvir-TP by 3′-dUTP, we observed a much stronger effect, as no activity traces reached the end of the template at 3′-dUTP:UTP stoichiometry of 10 (Figure 5F). The analysis showed a limited impact of Sofosbuvir-TP on the mean product length, with a minimum of (563±32)nt at a stoichiometry of 20 (Figure 5G). 3′-dUTP was much more effectively incorporated, shortening the mean product length down to (67±3)nt at the same stoichiometry (Figure 5H). Their respective effective incorporation rate at 50 µM UTP reflected these observations, that is, γsofosbuvir,50μMUTP=(3908±467)nt and γ3dUTP,50μMUTP=(241±9)nt. In other words, SARS-CoV-2 polymerase incorporates on average 3908 nt and 241 nt before incorporating either a single Sofosbuvir-TP or a single 3′-dUTP, respectively. The kinetics of RNA synthesis was unaffected by the presence of either 3′-dUTP or Sofosbuvir-TP, while their median replication time decreased at high stoichiometry, a direct consequence of the shortening of the RNA synthesis product (Figure 5—figure supplement 1E–H and Figure 5—figure supplement 2E–H , respectively). Repeating the experiments for a Sofosbuvir-TP:UTP stoichiometry of 6 now at 25 pN tension (Figure 2—figure supplement 4A), we did not see a significant difference in comparison with the data at 35 pN (Figure 5—figure supplement 1E–H), therefore the applied tension has no influence in the incorporation of Sofosbuvir-TP. As for 3′-dATP, our data suggest that stoichiometry against the competing NTP regulates Sofosbuvir-TP and 3′-dUTP incorporation, which therefore support that these analogs utilize the NAB state pathway for incorporation (Figure 1D). Our data provide further support to the poor incorporation of Sofosbuvir by SARS-CoV-2 (Gordon et al., 2020b; Xie et al., 2020a) and the low selectivity of the SARS-CoV-2 polymerase against 3′-dUTP.

Figure 5. Sofosbuvir-TP is a poor SARS-CoV-2 polymerase inhibitor in contrast with 3′-dUTP.

(A, B) SARS-CoV-2 polymerase activity traces for 500 µM NTPs and 500 µM of either (A) Sofosbuvir-TP or (B) 3′-dUTP. (C, D) SARS-CoV-2 polymerase product length using the indicated concentration of UTP, 500 µM of other NTPs, as a function of either (C) [Sofosbuvir-TP]/[UTP] or (D) [3′-dUTP]/[UTP]. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (E, F) SARS-CoV-2 polymerase activity traces in the presence of 50 µM of UTP, 500 µM of all other NTPs, and 500 µM of either (E) Sofosbuvir-TP or (F) 3′-dUTP. (G, H) SARS-CoV-2 polymerase product length using 50 µM UTP, 500 µM of other NTPs, as a function of either (G) [Sofosbuvir-TP]/[UTP] or (H) [3′-dUTP]/[UTP]. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. In (D, G, H), the solid line is the fit of the terminator effective incorporation rate (see Materials and methods). In (A, B, E, F), the insets are a zoom-in of the replication traces captured in the black square.

Figure 5.

Figure 5—figure supplement 1. SARS-CoV-2 polymerase activity traces kinetics in presence of Sofosbuvir-TP.

Figure 5—figure supplement 1.

(A, E) SARS-CoV-2 replication time for the 1043 nt long template using the indicated concentration of UTP, 500 µM of other NTPs as a function of the stoichiometry of [Sofosbuvir-TP]/[UTP]. The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation extracted from 1000 bootstraps. (B) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 500 µM NTP either without (circles) or with 0.1 mM (triangles), 0.5 mM (squares), and 1 mM (diamonds) Sofosbuvir-TP. The color code from light to dark gray further highlights the increasing concentration of Sofosbuvir-TP. The solid lines represent the fit to the stochastic-pausing model. (C) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (B). (D) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (B). (F) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 50 µM UTP, 500 µM of other NTPs, and either without (circles), or with 0.1 mM (triangles), 0.3 mM (squares), 0.5 mM (diamonds), and 1 mM (pentagons) Sofosbuvir-TP. The color code from light to dark gray further highlights the increasing concentration of Sofosbuvir-TP. The solid lines represent the fit to the stochastic-pausing model. (G) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (F). (H) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (F). The error bars in (B, F) represent one standard deviation extracted from 1000 bootstraps and the error bars in (C, D, G, H) represent one standard deviation extracted from 100 bootstraps.
Figure 5—figure supplement 2. SARS-CoV-2 polymerase activity traces kinetics in presence of 3′-dUTP.

Figure 5—figure supplement 2.

(A, E) SARS-CoV-2 replication time for the 1043 nt long template using the indicated concentration of UTP, 500 µM of other NTPs as a function of the stoichiometry of [3′-dUTP]/[UTP]. The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation extracted from 1000 bootstraps. (B) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 500 µM NTP either without (circles) or with 0.5 mM (triangles), 1 mM (squares), 1.5 mM (diamonds), and 2 mM (pentagon) 3′-dUTP. The color code from light to dark gray further highlights the increasing concentration of 3′-dUTP. The solid lines represent the fit to the stochastic-pausing model. (C) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (B). (D) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (B). (F) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 50 µM UTP, 500 µM of other NTPs, and either without (circles), or with 0.1 mM (triangles), 0.3 mM (squares), 0.5 mM (diamonds), and 1 mM (pentagons) 3′-dUTP. The color code from light to dark gray further highlights the increasing concentration of 3′-dUTP. The solid lines represent the fit to the stochastic-pausing model. (G) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (F). (H) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (F). The error bars in (B, F) represent one standard deviation extracted from 1000 bootstraps and the error bars in (C, D, G, H) represent one standard deviation extracted from 100 bootstraps.

ddhCTP is well incorporated by the polymerase but does not affect SARS-CoV-2 replication in cells

3ʹ-Deoxy-3′,4ʹ-didehydro-CTP (ddhCTP) is a recently discovered natural antiviral NA produced in mammalian cells by the viperin-catalyzed conversion of CTP to ddhCTP using a radical-based mechanism (Gizzi et al., 2018). While ddhCTP has been shown to efficiently terminate flavivirus replication both in vitro and in cells, its antiviral activity against SARS-CoV-2 polymerase remains unknown. The addition of 500 µM ddhCTP to a reaction buffer containing 500 µM NTP induces early termination events in the SARS-CoV-2 polymerase activity traces (Figure 6A). Similar amount of 3ʹ-dCTP instead of ddhCTP resulted in a larger fraction of traces showing early termination events (Figure 6B). The average RNA product length of the SARS-CoV-2 polymerase decreased by 1.4-fold when raising the ddhCTP:CTP stoichiometry to 4 (Figure 6C), while it decreased by 2.7-fold at similar stoichiometry against CTP (Figure 6D). We measured a respective effective incorporation rate γddhCTP,500μMCTP=(1221±130)nt and γ3dCTP,500μMCTP=(338±18)nt (Figure 6C,D). For both NAs, the replication time (Figure 6—figure supplement 1A and Figure 6—figure supplement 2A) and the RNA synthesis kinetics (Figure 6—figure supplement 1B–D and Figure 6—figure supplement 2B-D) were largely unaffected. Reducing the concentration of CTP down to 50 µM and keeping the other NTPs at 500 µM, both ddhCTP and 3ʹ-dCTP showed a significant reduction in length of the activity traces (Figure 6E,F). Analyzing the average product length, we extracted the respective effective incorporation rates at 50 µM CTP, that is, γddhCTP,50μMCTP=(1360±71)nt and γ3dCTP,50μMCTP=(457±21)nt (Figure 6G,H). These values are similar as what was measured at 500 µM CTP, and confirm the better incorporation of 3ʹ-dCTP over ddhCTP. The kinetics of RNA synthesis was unaffected by the presence of ddhCTP or 3ʹ-dCTP, while their median replication time decreased at high stoichiometry, as a result of the shortening of the RNA synthesis product (Figure 6—figure supplement 1F–H and Figure 6—figure supplement 2F-H, respectively). We also did not observe any impact of the applied tension for ddhCTP incorporation (Figure 2—figure supplement 4A). Here again, stoichiometry against their competing natural nucleotide CTP directly dictates the incorporation of 3ʹ-dCTP and ddhCTP, further supporting the utilization of the NAB pathway for their incorporation (Figure 1D).

Figure 6. ddhCTP and 3ʹ-dCTP inhibit efficiently the SARS-CoV-2 polymerase.

(A, B) SARS-CoV-2 polymerase activity traces for 500 µM NTPs and 500 µM of either (A) ddhCTP or (B) 3ʹ-dCTP. (C, D) SARS-CoV-2 polymerase product length using the indicated concentration of CTP, 500 µM of other NTPs, as a function of either (C) [ddhCTP]/[CTP] or (D) [3ʹ-dCTP]/[CTP]. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. (E, F) SARS-CoV-2 polymerase activity traces in the presence of 50 µM of CTP, 500 µM of all other NTPs, and 500 µM of either (E) ddhCTP or (F) 3ʹ-dCTP. (G, H) SARS-CoV-2 polymerase activity traces product length using 50 µM CTP, 500 µM of other NTPs, as a function of the stoichiometry of either (G) [ddhCTP]/[CTP] or (H) [3ʹ-dCTP]/[CTP]. The mean values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation error bars extracted from 1000 bootstraps. In (C, D, G, H), the solid lines are the fits of the terminator effective incorporation rate (see Materials and methods). In (A, B, E, F), the insets are a zoom-in of the replication traces captured in the black square.

Figure 6.

Figure 6—figure supplement 1. SARS-CoV-2 polymerase activity traces in presence of ddhCTP.

Figure 6—figure supplement 1.

(A, E) SARS-CoV-2 replication time for the 1043 nt long template using the indicated concentration of CTP, 500 µM of other NTPs, and the indicated stoichiometry of [ddhCTP]/[CTP]. The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation extracted from 1000 bootstraps. (B) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 500 µM NTP either without (circles) or with 0.1 mM (triangles), 0.5 mM (squares), and 1 mM (diamonds) ddhCTP. The color code from light to dark gray further highlights the increasing concentration of ddhCTP. The solid lines represent the fit to the stochastic-pausing model. (C) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (B). (D) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (B). (F) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 50 µM CTP, 500 µM of other NTPs, and either without (circles), or with 0.1 mM (triangles), 0.2 mM (squares), 0.3 mM (diamonds), 0.5 mM (pentagons), 0.8 mM (upside down triangle), and 1 mM (x) ddhCTP. The color code from light to dark gray further highlights the increasing concentration of ddhCTP. The solid lines represent the fit to the stochastic-pausing model. (G) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (F). (H) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (F). The error bars in (B, F) represent one standard deviation extracted from 1000 bootstraps and the error bars in (C, D, G, H) represent one standard deviation extracted from 100 bootstraps.
Figure 6—figure supplement 2. SARS-CoV-2 polymerase activity traces kinetics in presence of 3′-dCTP.

Figure 6—figure supplement 2.

(A, E) SARS-CoV-2 replication time for the 1043 nt long template using the indicated concentration of CTP, 500 µM of other NTPs as a function of the stoichiometry of [3′-dCTP]/[CTP]. The median values are indicated above the violin plots, and represented by horizontal black thick lines flanked by one standard deviation extracted from 1000 bootstraps. (B) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 500 µM NTP either without (circles) or with 0.5 mM (triangles), 1 mM (squares), 1.5 mM (diamonds), and 2 mM (pentagon) 3′-dCTP. The color code from light to dark gray further highlights the increasing concentration of 3′-dCTP. The solid lines represent the fit to the stochastic-pausing model. (C) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (B). (D) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (B). (F) Dwell time distributions of SARS-CoV-2 polymerase activity traces acquired in the presence of 50 µM CTP, 500 µM of other NTPs, and either without (circles), or with 0.1 mM (triangles), 0.3 mM (squares), 0.5 mM (diamonds), and 1 mM (pentagons) 3′-dCTP. The color code from light to dark gray further highlights the increasing concentration of 3′-dCTP. The solid lines represent the fit to the stochastic-pausingmodel. (G) Nucleotide addition rate (green), Pause 1 (dark blue), and Pause 2 (cyan) exit rates for the conditions described in (F). (H) Probabilities to enter Pause 1 (dark blue), Pause 2 (cyan), and the backtrack (red) states for the conditions described in (F). The error bars in (B, F) represent one standard deviation extracted from 1000 bootstraps and the error bars in (C, D, G, H) represent one standard deviation extracted from 100 bootstraps.
Figure 6—figure supplement 3. ddhC does not inhibit SARS-CoV-2 replication in huh7-hACE2 cells.

Figure 6—figure supplement 3.

Huh7-hACE2 cells in 96-well were incubated with the indicated concentrations of the tested compounds for 1.5 hr before SARS-CoV-2 (USA-WA1/2020 isolate) was added at MOI of 0.05. At ~24 hpi, the percentage of infected cells was assessed by immunofluorescence assay using a rabbit monoclonal antibody against the SARS-CoV-2 N protein. ‘sofo’ is Sofosbuvir. Results in (A and B) represent two separate experiments.
Figure 6—figure supplement 4. SARS-CoV-2 nsp14 exoribonuclease knockout is not replicative.

Figure 6—figure supplement 4.

(A) SARS-CoV-2 genome. The SARS-CoV-2 nsp14 exoribonuclease nucleotides and amino acid mutations (D90A/E92A) are indicated. (B) Phase-contrast images of electroporated cells. Vero E6 cells were electroporated with SARS-CoV-2 WT or nsp14 exoribonuclease knockout mutant RNA. (C) Plaque morphology of SARS-CoV-2 WT and nsp14 exoribonuclease knockout mutant viruses. Supernatants were harvested on day 3 post-electroporation (WT) and day 4 post-electroporation (mutant) from (B). Plaque assay was performed in Vero E6 cells and staining with neutral red solution after 48 hr infection. (D) RT-PCR analysis. Extracellular RNA from (B) were harvested on day 3 (WT) and day 4 (mutant). The nsp14 region of SARS-CoV-2 was amplified by RT-PCR to confirm viral production. Figure 6—figure supplement 4—source data 1 is the original of the agarose gel. (E) Transient replicon of SARS-CoV-2. A Renilla luciferase gene is inserted as a reporter and the nsp14 exoribonuclease knockout is shown as indicated. (F) Replicon luciferase assay. Huh-7 cells were electroporated with WT or mutant replicon RNA, cells were harvested and assayed for luciferase activities at indicated timepoints.
Figure 6—figure supplement 4—source data 1. Source image for the agarose gel in Figure 6—figure supplement 4D.

Though not as high as 3′-dCTP, the effective incorporation rate of ddhCTP should be sufficient to demonstrate a certain efficacy against viral replication in cells. Indeed, ddhCTP is a chain terminator, therefore a single incorporation is sufficient to end RNA synthesis. To verify whether ddhCTP inhibits replication in cells, we infected Huh7-hACE2 cells with SARS-CoV-2, treated these cells with different concentrations of RDV, Sofosbuvir and ddhC, and report on the level of infection by immunofluorescence against SARS-CoV-2 N protein (see Materials and methods, Figure 6—figure supplement 3A,B). While RDV showed a clear antiviral effect with an EC50 of 0.007 µM (Figure 6—figure supplement 3B), ddhC and Sofosbuvir did not show any impact on SARS-CoV-2 replication in cells. This result suggests that SARS-CoV-2 is able to evade the antiviral properties of the endogenously synthesized antiviral NA ddhC. We hypothesized that the 3′–5′ exonuclease activity of nsp14 protects SARS-CoV-2 replication by excising ddhCMP from the nascent RNA. To test this hypothesis, we made a SARS-CoV-2 strain, which includes the amino acid substitutions D90A and E92A that remove the exoribonuclease activity of nsp14 (Figure 6—figure supplement 4A). This SARS-CoV-2 mutant was unable to replicate in cells (Figure 6—figure supplement 4B–F), confirming a recent report (Ogando et al., 2020). Therefore, the role of nsp14 in the removal of ddhCMP from the SARS-CoV-2 genome could not be verified experimentally. Future experiments will be designed to address this question.

Discussion

We present here the first characterization of the mechanism of action of antiviral NAs against SARS-CoV-2 polymerase at the single-molecule level. We show that SARS-CoV-2 polymerase is the fastest RNA studied polymerase to date, elongating up to 170nt.s1 at 37 °C (Figure 1H). With our assay, we monitored the incorporation and determined the mechanism of action of several NAs, that is, 3′-dATP, 3′-dUTP, 3′-dCTP, Sofosbuvir-TP, ddhCTP, T-1106-TP, and RDV-TP, and resume their properties in Table 1.

Table 1. Summary table for the investigated NAs.

Modification Incorporation pathway Mechanism of action Main conclusions
In vitro incorporation efficiency In vivo efficacy
3′-dATP Ribose, 3′ NAB Chain terminator Medium Unreported
3′-dCTP Ribose, 3′ NAB Chain terminator Medium Unreported
3′-dUTP Ribose, 3′ NAB Chain terminator Medium Unreported
Remdesivir-TP Ribose, 1′ SNA, VSNA Polymerase backtrack Very high Very high
T-1106-TP Base VSNA Induces pauses (mutagenic) Medium Unreported
Sofosbuvir-TP Ribose, 2′ NAB Chain terminator Very low None
ddhCTP Ribose, 3′ NAB Chain terminator low None

The present study demonstrates that NA selection and incorporation are not force-dependent (Figure 2—figure supplement 4), which further validates the utilization of high-throughput magnetic tweezers to study NA mechanism of action. This result is in agreement with our recent study on SARS-CoV-2 polymerase mechanochemistry, where we showed that entry probability in NAB, SNA, and VSNA was not force-dependent, and that force mainly affected the kinetics of a large conformational subsequent to chemistry, that is, after nucleotide selection and incorporation.

Our study shows that RDV-TP is not a delayed chain terminator at physiological concentration of all NTPs, but instead induces pauses in the polymerase elongation kinetics that are easily overcome at saturating NTP concentration (Figure 3). Since our preprint was published on BioRxiv in August 2020, our finding has been corroborated by two recent studies (Kokic et al., 2021; Bravo et al., 2021). Similarly, T-1106-TP incorporation does not induce termination, but pauses in the polymerase elongation kinetics (Figure 4). However, RDV-TP affects both Pause 1 and Pause 2 exit rates, while T-1106-TP affects only the latter. We showed here that these two NAs do not affect the probability to enter Pause 1 and Pause 2, suggesting that they preferably bind to the polymerase active site after it entered the SNA (Pause 1) or VSNA (Pause 2) pathway. Indeed, if the pauses induced by either RDV-TP or T-1106-TP incorporation were mechanistically unrelated to Pause 1 and Pause 2, the total number of pauses would cumulate and the probability of pausing would dramatically increase, which we do not observe. We therefore suggest that RDV-TP can be incorporated by both SNA and VSNA pathways, while T-1106-TP is only incorporated by the latter. Finally, Pause 1 and Pause 2 respectively account for ~6% and ~0.3% of all the nucleotide addition events at a saturating concentration of NTP. This defines an upper limit for RDV-TP and T-1106-TP relative incorporation, and explains why RDV-TP is incorporated much better than Favipiravir (Xie et al., 2020a).

Two recent ensemble kinetic studies investigating the mechanism of action of RDV-TP on SARS-CoV-2 elongation kinetics have recently been published. In the first one, the experiments were performed at submicromolar concentration of NTPs, and showed that RDV-TP is incorporated threefold better than ATP in such conditions (Gordon et al., 2020b). In the second one, the authors also claimed that RDV-TP was better incorporated than ATP (Dangerfield et al., 2020), while using higher concentration of NTPs than in the first study. Both of these studies agree with our results: RDV is better incorporated by the coronavirus polymerase elongation kinetics at low concentration of natural nucleotides. Indeed, in such conditions, the probabilities of the pathways by which RDV-TP is incorporated, that is, SNA and VSNA, increase significantly (Bera et al., 2021). In addition, we showed that RDV-TP incorporation remains noticeable at concentration as low as 20 µM, even when competing with 500 µM ATP. Being able to monitor RDV-TP incorporation at the single-molecule level in competition with saturating concentration of NTP—including ATP—, while the SARS-CoV-2 polymerase was elongating a ~1 kb long RNA product further completes the understanding of RDV mechanism of action.

Our assay revealed that RDV-TP incorporation leads the coronavirus polymerase into backtrack as deep as ~30 nt (Figure 3GH). This result demonstrates that the barrier induced by the clash of RDV-MP (Kokic et al., 2021) with the serine-861 of nsp12 is sufficiently strong to elicit polymerase backtrack, leading the polymerase into a pause long enough to be mistaken for a termination event in ensemble assays. We anticipate that RDV efficacy is further amplified when the polymerase is elongating through template secondary structures, which stimulates polymerase backtrack (Bera et al., 2021). Lower ATP concentration would also decrease the probability to overcome the barrier when an uracil is encoded ~3 nt downstream the incorporated RDV-MP, increasing the backtrack pause probability, as observed here. Interestingly, RDV has a strong efficacy against SARS-CoV-2 in infected cells (Figure 6—figure supplement 4A,B), which indicates that the 3′–5′ exonuclease nsp14 does not remove efficiently RDV-MP from the nucleic acid chain. Our results suggest that polymerase backtrack is therefore not an intermediate of product strand proofreading, which corroborates a preceding study showing that nsp14 poorly excise single-stranded RNA (Ferron et al., 2018; Liu et al., 2021).

Concerning obligatory terminators, the effective incorporation rate we measured showed that 3′-dATP (Figure 2), 3′-dUTP (Figure 5), 3′-dCTP (Figure 6), and—to a lesser extent—ddhCTP (Figure 6) are well incorporated by the SARS-CoV-2 polymerase, while Sofosbuvir-TP is strongly outcompeted by UTP (Figure 5). Though well incorporated, 3′-dNTP is cytotoxic, and is therefore not used as antiviral drugs (Arnold et al., 2012). Interestingly, the effective incorporation rate of all these terminators is only affected by the stoichiometry of their respective competing natural nucleotide, and not their absolute concentration (unlike RDV-TP), suggesting an incorporation via the NAB pathway (Figure 1D). Indeed, we showed that NA incorporated via either the SNA or the VSNA pathway, for example, RDV-TP, would be more likely to be added in the RNA chain at low substrate concentration, independently of the stoichiometry.

A steady-state kinetic study showed that NAs modified at the 2′ and 3′ positions are strongly discriminated against by their competing natural nucleotide (Gordon et al., 2020b). Such selectivity is an issue for purine-based analogs, which must compete with high concentrations of ATP and GTP in the cell. In contrast, pyrimidine-based analogs, for example, derivatives of CTP, will only need to compete with intracellular CTP pools on the order of 100 µM (Traut, 1994). These features make ddhCTP a particularly attractive antiviral NA. Furthermore, under certain conditions, the interferon α-induced viperin converts up to 30% of the cellular pool of CTP into ddhCTP, further increasing the ddhCTP:CTP stoichiometry in a direction favoring even greater potency (Gizzi et al., 2018). However, we could not show any efficacy of ddhC in SARS-CoV-2 infected cells (Figure 6—figure supplement 4), suggesting that SARS-CoV-2 has developed ways to counter this cellular defense mechanism. Future studies will investigate whether the exonuclease nsp14 is capable of removing ddhCMP and is therefore responsible for protecting the virus against endogenously produced antiviral NAs.

High-throughput, real-time magnetic tweezers present numerous advantages to study RdRp elongation dynamics, such as monitoring polymerase position with high spatiotemporal resolution while elongating kilobases long templates in the presence of saturating concentration of competing natural nucleotides, and therefore provide complementary information to discontinuous assays to understand the selectivity and/or mechanism of action of NAs. Such an assay will also reveal how adding functional capacity to the core polymerase, for example, RNA helicase activity and proofreading, modulate RdRp elongation dynamics and response to antiviral therapeutics.

Materials and methods

ddhCTP was prepared as previously described (manuscript in preparation). Briefly, ddhC (Gizzi et al., 2018) was dissolved in 20 mM Tris-HCl, 100 mM KCl, and 10 mM BME at pH 7.5. ATP was added to a final concentration of 100 μM, and PEP was added to a concentration of ~3 mM. The proteins human UCK2, CMPK1, and NDK were all added to the reaction mixture to a final concentration of ~10 μM. PK/LDH mixture was added at a final concentration of 1.2 and 1.8 units ml−1. After the reaction was complete, proteins were precipitated by lowering the pH to 2 with concentrated HCl and then immediately returning the pH to 9. Precipitated protein was removed by centrifugation and the supernatant was passed through a 0.22 µm filter. The final solution was diluted ten fold using 20 mM TEAB at pH 9.5. ddhCTP was purified with a MonoQ 5/50 anion exchange column using TEAB buffer at pH 9.5. The final ddhCTP was concentrated with lyophilization. Concentration of ddhCTP stocks was determined using an extinction coefficient of 9000 M−1 cm−1.

Recombinant protein expression of RdRp (nsp12) and cofactors (nsp7 and nsp8) from SARS-CoV-2

This protocol was described in Chien et al., 2020. SARS-CoV-2 nsp12: The SARS-CoV-2 nsp12 gene was codon optimized and cloned into pFastBac with C-terminal additions of a TEV site and strep tag (Genscript). The pFastBac plasmid and DH10Bac Escherichia coli (Life Technologies) were used to create recombinant bacmids. The bacmid was transfected into Sf9 cells (Expression Systems) with Cellfectin II (Life Technologies) to generate recombinant baculovirus. The baculovirus was amplified through two passages in Sf9 cells, and then used to infect 1 L of Sf21 cells (Expression Systems) and incubated for 48 hr at 27°C. Cells were harvested by centrifugation, resuspended in wash buffer (25 mM HEPES pH 7.4, 300 mM NaCl, 1 mM MgCl2, and 5 mM DTT) with 143 μl of BioLock per liter of culture. Cells were lysed via microfluidization (Microfluidics). Lysates were cleared by centrifugation and filtration. The protein was purified using Strep Tactin superflow agarose (IBA). Strep Tactin eluted protein was further purified by size exclusion chromatography using a Superdex 200 Increase 10/300 column (GE Life Sciences) in 25 mM HEPES, 300 mM NaCl, 100 μM MgCl2, 2 mM TCEP, at pH 7.4. Pure protein was concentrated by ultrafiltration prior to flash freezing in liquid nitrogen. SARS-CoV-2 nsp7 and nsp8: The SARS-CoV-2 nsp7 and nsp8 genes were codon optimized and cloned into pET46 (Novagen) with an N-terminal 6× histidine tag, an enterokinase site, and a TEV protease site. Rosetta2 pLys E. coli cells (Novagen) were used for bacterial expression. After induction with isopropyl β-D-1-thiogalactopyranoside (IPTG), cultures were grown at 16°C for 16 hr. Cells were harvested by centrifugation and pellets were resuspended in wash buffer (10 mM Tris pH 8.0, 300 mM NaCl, 30 mM imidazole, and 2 mM DTT). Cells were lysed via microfluidization and lysates were cleared by centrifugation and filtration. Proteins were purified using Ni-NTA agarose beads and eluted with wash buffer containing 300 mM imidazole. Eluted nsp12, nsp7, and ns8 were digested with 1% w/w TEV protease during overnight room temperature dialysis (10 mM Tris pH 8.0, 300 mM NaCl, and 2 mM DTT). Digested proteins were passed back over Ni-NTA to remove undigested protein before concentrating the proteins by ultrafiltration. Nsp7 and nsp8 proteins were further purified by size exclusion chromatography using a Superdex 200 Increase 10/300 column (GE Life Sciences). Purified proteins were concentrated by ultrafiltration prior to flash freezing with liquid nitrogen.

Recombinant protein expression of RdRp (nsp12) and cofactors (nsp7 and nsp8) from SARS-CoV-1

This protocol was described in Shannon et al., 2020b. All SARS-CoV proteins used in this study were expressed in E. coli, under the control of T5 promoters. Cofactors nsp7L8 and nsp8 alone were expressed from pQE30 vectors with C-terminal and N-terminal hexa-histidine tags, respectively. TEV cleavage site sequences were included for His-tag removal following expression. The nsp7L8 fusion protein was generated by inserting a GSGSGS linker between nsp7- and nsp8-coding sequences. Cofactors were expressed in NEB Express C2523 (New England Biolabs) cells carrying the pRare2LacI (Novagen) plasmid in the presence of Ampicillin (100 µM/ml) and Chloramphenicol (17 µg/ml). Protein expression was induced with 100 µM IPTG once the OD600=0.5–0.6, and expressed overnight at 17°C. Protein was purified first through affinity chromatography with HisPur Cobalt resin (Thermo Fisher Scientific), with a lysis buffer containing 50 mM Tris-HCl pH 8, 300 mM NaCl, 10 mM Imidazole, supplemented with 20 mM MgSO4, 0.25 mg/ml Lysozyme, 10 µg/ml DNase, 1 mM PMSF, with lysis buffer supplemented with 250 mM imidazole. Eluted protein was concentrated and dialyzed overnight in the presence of histidine labeled TEV protease (1:10 w/w ratio to TEV:protein) for removal of the protein tag. Cleaved protein was purified through a second cobalt column and protein was purified through size exclusion chromatography (GE, Superdex S200) in gel filtration buffer (25 mM HEPES pH 8, 150 mM NaCl, 5 mM MgCl2, and 5 mM TCEP). Concentrated aliquots of protein were flash-frozen in liquid nitrogen and stored at −80°C. A synthetic, codon-optimized SARS-CoV nsp12 gene (DNA 2.0) bearing C-terminal 8His-tag preceded by a TEV protease cleavage site was expressed from a pJ404 vector (DNA 2.0) in E. coli strain BL21/pG-Tf2 (Takara). Cells were grown at 37°C in the presence of Ampicillin and Chloramphenicol until OD600 reached 2. Cultures were induced with 250 µM IPTG and protein expressed at 17°C overnight. Purification was performed as above in lysis buffer supplemented with 1% CHAPS. Two additional wash steps were performed prior to elution, with buffer supplemented with 20 mM imidazole and 50 mM arginine for the first and second washes respectively. Polymerase was eluted using lysis buffer with 500 mM imidazole and concentrated protein was purified through gel filtration chromatography (GE, Superdex S200) in the same buffer as for nsp7L8. Collected fractions were concentrated and supplemented with 50% glycerol final concentration and stored at −20°C.

Experimental biosafety while carrying experiments with SARS-CoV-2 infected cells

All experiments involving live SARS-CoV-2 were carried out under biosafety level 3 (BSL-3) containment by personnel wearing the appropriate PPE, including powered air-purifying respirators with Tyvek suits, aprons, booties, and double gloves.

Cell lines and viruses

Huh7 cells were purchased from Glow Biologics (GBTC-099H) and tested negative for mycoplasma. These cells expressed human ACE2 (huh7-hACE2) after transduction by lentiviral particles derived with pWPI-IRES-Puro-Ak-ACE2 (a gift from Sonja Best; Addgene plasmid # 154985). SARS-CoV-2, isolate USA-WA1/2020 (NR-52281), was obtained through BEI Resources and propagated once on VERO E6 cells before it was used for this study.

Immunofluorescence assay

Huh7-hACE2 cells in 96-well plates (Corning) were infected with SARS-CoV-2 (USA-WA1/2020 isolate) at MOI of 0.05 in Dulbecco's modified Eagle's medium (DMEM) supplemented with 1% fetal bovine serum (FBS). Before 1.5 hr viral inoculation, the tested compounds were added to the wells in triplicate. The infection proceeded for 24 hr without the removal of the viruses or the compounds. The cells were then fixed with 4% paraformaldehyde, permeabilized with 0.1% Triton-100, blocked with DMEM containing 10% FBS, and stained with a rabbit monoclonal antibody against SARS-CoV-2 NP (GeneTex, GTX635679) and an Alexa Fluor 488-conjugated goat anti-mouse secondary antibody (Thermo Fisher Scientific). Hoechst 33342 was added in the final step to counterstain the nuclei. Fluorescence images of approximately 10,000 cells were acquired per well with a 10× objective in a Cytation 5 (BioTek). The total number of cells, as indicated by the nuclei staining, and the fraction of the infected cells, as indicated by the NP staining, were quantified with the cellular analysis module of the Gen5 software (BioTek).

SARS-CoV-2 virus production and characterization

SARS-CoV-2 WT and nsp14 exoribonuclease knockout viruses were prepared using a SARS-CoV-2 infectious clone (Xie et al., 2020b). Briefly, viral RNA was obtained by in vitro RNA transcription, and 40 μg RNA transcripts and 20 μg N gene RNA were co-electroporated into 8×106 Vero E6 cells using Gene Pulser XCell electroporation system (Bio-Rad, Hercules, CA) at a setting of 270 V and 950 μF with a single pulse. The electroporated cells were seeded to a T75 flask and immediately transfer to BSL-3 facility. Viral production was confirmed by RT-PCR. The supernatants of electroporated cells were harvested and centrifuged at 1000×g for 10 min to remove cell debris. 250 μl supernatant was added and mixed thoroughly with 1 ml of TRIzol LS reagent (Thermo Fisher Scientific). RNA was extracted according to the manufacturer’s instructions and resuspended in 20 μl of nuclease-free water. RT-PCR was performed using the SuperScript IV One-Step RT-PCR Kit (Thermo Fisher Scientific).

Virus was determined by plaque assay. Approximately 1.2×106 Vero E6 cells were seeded to each well of a six-well plate. The viruses were tenfold serially diluted with 2% FBS DMEM medium and 200 μl of virus dilution was transferred to each well of the six-well plate. After the incubation for 1 hr at 37°C, 2 ml of overlay medium containing 2% FBS DMEM medium and 1% sea-plaque agarose (Lonza, Walkersville, MD), was added to the infected cells per well. After a 2-day incubation, another 2 ml of overlay medium with neutral red (final concentration 0.01%) was added onto the first overlay. After 12 hr incubation, the plates were sealed with Breath-Easy sealing membrane (Sigma-Aldrich, St. Louis, MO) and plaques were counted.

SARS-CoV-2 luciferase replicon assay

SARS-CoV-2 transient luciferase replicon assay was performed as previously described (Xia et al., 2020). WT and mutant replicon RNA, and N gene mRNA were obtained through T7 in vitro transcription, and 40 μg RNA transcripts and 20 μg N gene RNA were co-electroporated into 8×106 Huh-7 cells (ATCC, tested negative on mycoplasma) using Gene Pulser XCell electroporation system (Bio-Rad) at a setting of 270 V and 950 μF with a single pulse. After 10 min recovery, electroporated cells were seeded to 24-well plates, and harvested at indicated timepoints. Luciferase signal was measured using Renilla luciferase assay system (Promega) and read by Cytation 5 (BioTek) according to the manufacturer’s protocols.

Construct fabrication

The fabrication of the RNA hairpin has been described in detail in Papini et al., 2019. The RNA hairpin is made of a 499 bp dsRNA stem terminated by a 20 nt loop that is assembled from three ssRNA annealed together, and two handles, one of 856 bp at the 5′-end and one 822 bp at the 3′-end. The handles include either a 343 nt digoxygenin-labeled ssRNA or a 443 nt biotin-labeled ssRNA. Upon applied force above ~21 pN, the hairpin opens and frees a 1043 nt ssRNA template for SARS-CoV-2 replication. To obtain the different parts of the RNA construct, template DNA fragments were amplified via PCR, purified (Monarch PCR and DNA Cleanup Kit) and in vitro transcribed (NEB HiScribe T7 High Yield RNA Synthesis Kit). Transcripts were then treated with Antarctic Phosphatase and T4 Polynucleotide Kinase. RNAs were purified using the RNA Clean and Concentrator-25 kit (Zymo Research). Individual RNA fragments were annealed and ligated with T4 RNA ligase 2 (NEB) to assemble the RNA hairpin.

The template contains 250 U (24%), 253 A (24%), 273 C (26%), and 267 G (26%).

High-throughput magnetic tweezers apparatus

The high-throughput magnetic tweezers used in this study have been described in detail elsewhere (Ostrofet et al., 2018). Shortly, a pair of vertically aligned permanent magnets (5 mm cubes, SuperMagnete, Switzerland) separated by a 1 mm gap are positioned above a flow cell (see paragraph below) that is mounted on a custom-built inverted microscope. The vertical position and rotation of the magnets are controlled by two linear motors, M-126-PD1 and C-150 (Physik Instrumente PI, GmbH and Co. KG, Karlsruhe, Germany), respectively. The field of view is illuminated through the magnets gap by a collimated LED-light source, and is imaged onto a large chip CMOS camera (Dalsa Falcon2 FA-80–12 M1H, Stemmer Imaging, Germany) using a 50× oil immersion objective (CFI Plan Achro 50 XH, NA 0.9, Nikon, Germany) and an achromatic doublet tube lens of 200 mm focal length and 50 mm diameter (Qioptic, Germany). To control the temperature, we used a system described in detail in Seifert et al., 2020. Shortly, a flexible resistive foil heater with an integrated 10 MΩ thermistor (HT10K, Thorlabs) is wrapped around the microscope objective and further insulated by several layers of Kapton tape (KAP22-075, Thorlabs). The heating foil is connected to a PID temperature controller (TC200 PID controller, Thorlabs) to adjust the temperature within ∼0.1°.

Flow cell assembly

The fabrication procedure for flow cells has been described in detail in Ostrofet et al., 2018. To summarize, we sandwiched a double layer of Parafilm by two #1 coverslips, the top one having one hole at each end serving as inlet and outlet, the bottom one being coated with a 0.01% m/V nitrocellulose in amyl acetate solution. The flow cell is mounted into a custom-built holder and rinsed with ~1 ml of 1× phosphate-buffered saline (PBS). 3 µm diameter polystyrene reference beads are attached to the bottom coverslip surface by incubating 100 µl of a 1:1000 dilution in PBS of (LB30, Sigma Aldrich, stock conc.: 1.828*1011 particles per milliliter) for ~3 min. The tethering of the magnetic beads by the RNA hairpin construct relies on a digoxygenin/anti-digoxygenin and biotin-streptavidin attachment at the coverslip surface and the magnetic bead, respectively. Therefore, following a thorough rinsing of the flow cell with PBS, 50 µl of anti-digoxigenin (50 µg/ml in PBS) is incubated for 30 min. The flow cell was flushed with 1 ml of 10 mM Tris, 1 mM EDTA pH 8.0, 750 mM NaCl, 2 mM sodium azide buffer to remove excess of anti-digoxigenin followed by rinsing with another 0.5 ml of 1× TE buffer (10 mM Tris, 1 mM EDTA pH 8.0 supplemented with 150 mM NaCl, and 2 mM sodium azide). The surface is then passivated by incubating bovine serum albumin (BSA, New England Biolabs, 10 mg/ml in PBS and 50% glycerol) for 30 min, and rinsed with 1× TE buffer.

Single-molecule RdRp replication activity experiments

20 µl of streptavidin-coated Dynal Dynabeads M-270 streptavidin-coated magnetic beads (Thermo Fisher Scientific) was mixed with ~0.1 ng of RNA hairpin (total volume 40 µl) (see Materials and methods) and incubated for ~5 min before rinsing with ~2 ml of 1× TE buffer to remove any unbound RNA and the magnetic beads in excess. RNA tethers were sorted for functional hairpins by looking for the characteristic jump in extension length due to the sudden opening of the hairpin during a force ramp experiment (Figure 1—figure supplement 1C; Papini et al., 2019). The flow cell was subsequently rinsed with 0.5 ml reaction buffer (50 mM HEPES pH 7.9, 10 mM DTT, 2 µM EDTA, and 5 mM MgCl2). After starting the data acquisition at a force that would keep the hairpin open, 100 µl of reaction buffer containing either 0.6 µM of nsp12, 1.8 µM of nsp7 and nsp8 for SARS-CoV-2 experiments or 0.1 µM of nsp12, 1 µM of nsp7 and nsp8 for SARS-CoV-1 experiments, the indicated concentration of NTPs and of NAs (if required) were flushed in the flow cell to start the reaction. Sofosbuvir-TP and T-1106-TP were purchased from Jena Bioscience (Jena, Germany) and 3′-dATP was purchased from TriLink Biotechnologies (San Diego, CA). The experiments were conducted at a constant force as indicated for a duration of 20–40 min. The camera frame rate was fixed at either 58 Hz or 200 Hz, for reaction temperature set at either 25°C or 37°C, respectively. A custom written Labview routine (Cnossen et al., 2014) controlled the data acquisition and the (x-, y-, z-) positions analysis/tracking of both the magnetic and reference beads in real time. Mechanical drift correction was performed by subtracting the reference bead position to the magnetic bead position.

Data processing

The replication activity of SARS-CoV-2 core polymerase converts the tether from ssRNA to dsRNA, which concomitantly decreases the end-to-end extension of the tether. The change in extension measured in micron was subsequently converted into replicated nucleotides NR using the following equation:

NR(F)=NLssF-Lmeas(F)LssF-Lds(F) (1)

where Lmeas(F), LssF and Lds(F) are the measured extension during the experiment, the extension of an ssRNA and of a dsRNA construct, respectively, experiencing a force F, and N the number of nucleotides of the ssRNA template (Dulin et al., 2015a). The traces were then filtered using a Kaiser-Bessel low-pass filter with a cutoff frequency at 2 Hz. We removed the rare slow outliers traces from data sets (Figure 1—figure supplement 2A). As previously described in Dulin et al., 2015a, a dwell time analysis was performed by scanning the filtered traces with non-overlapping windows of 10 nt to measure the time (coined throughout the manuscript dwell time) for SARS-CoV-2 polymerase to incorporate ten successive nucleotides. The dwell times of all the traces for a given experimental condition were assembled and further analyzed using a maximum likelihood estimation (MLE) fitting routine to extract the parameters from the stochastic-pausing model.

SARS-CoV-2 replication product length analysis

To extract the product length of the replication complex, only the traces where the beginning and the end could clearly be distinguished and for which the tether did not rupture for ten minutes following the last observed replication activity were considered. We represented the mean product length, as well as one standard deviation of the mean from 1000 bootstraps as error bars.

Stochastic-pausing model

The model is described in detail in Dulin et al., 2017; Dulin et al., 2015a; Seifert et al., 2020. There are many kinetic models that are consistent with the empirical dwell time distributions we observe, and we here work under the assumption that the probability of pausing is low enough that there is only one rate-limiting pause in each dwell time window. This assumption washes out most details of the kinetic scheme that connects pauses and nucleotide addition, but allows us to determine the general form of the dwell time distribution without specifying how the pauses are connected to the nucleotide addition pathway

pdw(t)pnaΓ(t;Ndw,1kna)+Q(t)(n=1Nsppnkneknt+abt2(1+t/1s)3/2)

In the above expression, the gamma function in the first term contributes the portion pna of dwell times that originate in the RdRp crossing the dwell time window of size Ndw base pairs without pausing; the second term is a sum of contributions originating in pause-dominated transitions, each contributing a fraction pn of dwell times; the third term captures the asymptotic power-law decay (amplitude abt) of the probability of dwell times dominated by a backtrack. The backtracked asymptotic term needs to be regularized for times shorter than the diffusive backtrack step. We have introduced a regularization at 1 s, but the precise timescale does not matter, as long as it is set within the region where the exponential pauses dominate over the backtrack. From left to right, each term of Equation 1 is dominating the distribution for successively longer dwell times.

A cutoff factor Qt for short times is introduced to account for the fact that the dwell time window includes Ndw nucleotide-addition steps,

Qt=tkna/NdwNdw-11+tkna/NdwNdw-1 (3)

The fit results dependence on these cutoffs is negligible as long as they are introduced in regions where the corresponding term is sub-dominant. Here, the cut is placed under the center of the elongation peak, guaranteeing that it is placed where pausing is sub-dominant.

Maximum likelihood estimation

The normalized version of Equation 1 is the dwell time distribution fit to the experimentally collected dwell-times tii by minimizing the likelihood function (Cowan, 1998).

L=-ilnpdw(ti) (4)

with respect to rates and probabilistic weights.

Dominating in a dwell time window versus dominating in one step

The fractions pn represent the probability that a particular rate kn dominates the dwell time. We want to relate this to the probability Pn that a specific exit rate dominates within a 1-nt transcription window. Assuming we have labeled the pauses so that kn1>kn, we can relate the probability of having rate n dominating in Ndw steps to the probability of having it dominate in one step through

pn=m=0nPmNdw-m=0n-1PmNdw,p0=pna=PnaNdw=P0Ndw (5)

The first term in Equation 3 represents the probability of having no pauses longer than the nth pause in the dwell time window, and the second term represents the probability of having no pauses longer than the (n-1)th pause. The difference between the two terms is the probability that the nth pause will dominate. This can be inverted to yield a relation between the single-step probabilities (Pn) and the dwell time window probabilities (pn)

Pn=m=0npm1/Ndw-m=0n-1pm1/Ndw,P0=p01/Ndw (6)

This relationship has been used throughout the manuscript to relate our fits over a dwell time window to the single-step probabilities.

Maximum likelihood estimation fitting routine

The above stochastic-pausing model was fit to the dwell time distributions using a custom Python 3.7 routine. Shortly, we implemented a combination of simulated annealing and bound constrained minimization to find the parameters that minimize Equation 2. We calculated the statistical error on the parameters by applying the MLE fitting procedure on 100 bootstraps of the original data set (Press et al., 1992), and reported the standard deviation for each fitting parameters.

Competition between obligatory terminator nucleotide analogs and their natural nucleotide homologues

Starting with an empty active site (E), we assume that there is direct binding competition between the natural nucleotide (N) and the NA terminator (T, simply coined terminator) that result in either the former bound (Nb) or the latter bound (Tb) to the active site. From these states there can be any number of intermediate states before the base is either added to the chain with probability PcatT/N, or unbinds from the pocket with probability 1PcatT/N see Figure 2—figure supplement 3.

The effective incorporation rate is the attempt rate times the probability of success,

kincT/N=[T/N]KonT/NPcatT/N (7)

and the relative probability that next incorporated base is a terminator or natural nucleotide is given by the relative effective addition rates.

pTpN=kincTkincN=[T][N]KonTKonNPcatTPcatN,pT+pN=1. (8)

This can be rewritten as,

pN=yy+x,pT=xy+x,x=[T][N],y=KonNKonTPcatNPcatT

In the above, x is the relative stoichiometry between T and N, while y is the relative effective incorporation rates of N and T at equimolar conditions.

On an infinite construct, polymerization will proceed until the first T is incorporated, after which it terminates. At termination, the product has incorporated n1 Ns, and finally one T, with probability.

P(n)=(pN)n1pT=(1pT)n1pT (9)

The average number of Ns and Ts incorporated on an infinite construct is therefore.

n=n=1n(pN)n1pT=1/pT (10)

If the construct only allows for the addition of N Ns and Ts, the average number of Ns and Ts in the product will instead be,

nN=n=1Nn(pN)n1pT+n=N+1N(pN)n1pT=1(pN)NpT=n(1(pN)N) (11)

For a genome of length L, with the relative abundance q of templating bases for N and T, we thus expect there to be at most N=qL Ns and Ts incorporated at termination. At termination the product then has the average length.

lL=nqLq=1(pN)qLqpT=l(1(pN)qL),l=1qpT (12)

Data fitting

Though the constructs are 1043 nucleotides long, this length is not always reached even when there are no terminators in the buffer. The average product length is about 10% shorter than the full construct length. To account for this reduction in maximal average product length, we simply fix L to be the mean product length reached without terminator in the buffer, and fit out γ from a least-square fit, weighted with the inverse experimental variance.

Acknowledgements

The authors thank Joy Feng from Gilead Sciences for providing RDV-TP, and Veronique Fattorini and Barbara Selisko for excellent technical assistance and help in SARS-CoV-1 proteins purification. DD was supported by the Interdisciplinary Center for Clinical Research (IZKF) at the University Hospital of the University of Erlangen-Nuremberg, the German Research Foundation grant DFG-DU-1872/3-1 and BaSyC – Building a Synthetic Cell’ Gravitation grant (024.003.019) of the Netherlands Ministry of Education, Culture and Science (OCW) and the Netherlands Organisation for Scientific Research (NWO). DD thanks OICE for providing office and lab space, and access to their molecular biology lab. RNK was supported by grant AI123498 from NIAID, NIH. JMW and LDH thank the Ministry of Business Innovation and Employment Contract UOOX1904 (NZ). YX was supported by the National Institutes of Health (NIH) grant AI151638. SARS-Related Coronavirus 2, Isolate USA-WA1/2020 (NR-52281) was deposited by the Centers for Disease Control and Prevention and obtained through BEI Resources, NIAID, NIH. PYS was supported by NIH grants AI134907 and UL1TR001439, and awards from the Sealy and Smith Foundation, Kleberg Foundation, the John S Dunn Foundation, the Amon G. Carter Foundation, the Gilson Longenbaugh Foundation, and the Summerfield Robert Foundation. JJA and CEC were supported by grant AI045818 from NIAID, NIH. AS, TTNL, and BC acknowledge grants by the Fondation pour la Recherche Médicale (Aide aux équipes), the SCORE project H2020 SC1-PHE-Coronavirus-2020 (grant#101003627), and the REACTing initiative (REsearch and ACTion targeting emerging infectious diseases).

Funding Statement

The funders had no role in study design, data collection and interpretation, or the decision to submit the work for publication.

Contributor Information

David Dulin, Email: d.dulin@vu.nl.

Maria Spies, University of Iowa, United States.

Aleksandra M Walczak, École Normale Supérieure, France.

Funding Information

This paper was supported by the following grants:

  • National Institutes of Health AI123498 to Robert N Kirchdoerfer.

  • National Institutes of Health AI151638 to Yan Xiang.

  • National Institutes of Health AI134907 to Pei-Yong Shi.

  • National Institutes of Health UL1TR001439 to Pei-Yong Shi.

  • National Institutes of Health AI045818 to Jamie J Arnold, Craig Eugene Cameron.

  • H2020 European Research Council 101003627 to Bruno Canard.

  • Deutsche Forschungsgemeinschaft DFG-DU-1872/3-1 to David Dulin.

  • Nederlandse Organisatie voor Wetenschappelijk Onderzoek 024.003.019 to David Dulin.

  • Ministry of Business, Innovation and Employment UOOX1904 to James M Wood, Lawrence D Harris.

Additional information

Competing interests

No competing interests declared.

Author contributions

Data curation, Software, Formal analysis, Validation, Investigation, Visualization, Methodology, Writing - review and editing.

Data curation, Software, Formal analysis, Validation, Investigation, Visualization, Methodology, Writing - review and editing.

Resources, Software, Formal analysis, Writing - review and editing.

Resources, Writing - review and editing.

Resources, Writing - review and editing.

Resources, Data curation, Formal analysis, Funding acquisition, Investigation, Visualization, Methodology, Writing - review and editing.

Resources, Data curation, Formal analysis, Funding acquisition, Investigation, Visualization, Methodology, Writing - review and editing.

Data curation, Formal analysis, Investigation, Visualization, Methodology, Writing - review and editing.

Resources, Writing - review and editing.

Resources, Writing - review and editing.

Resources, Writing - review and editing.

Conceptualization, Resources, Investigation, Writing - review and editing.

Resources, Writing - review and editing.

Resources, Writing - review and editing.

Resources, Formal analysis, Funding acquisition, Visualization, Methodology, Writing - review and editing.

Data curation, Formal analysis, Funding acquisition, Validation, Investigation, Visualization, Methodology, Writing - review and editing.

Conceptualization, Resources, Writing - review and editing.

Formal analysis, Visualization, Methodology, Writing - review and editing.

Conceptualization, Funding acquisition, Writing - original draft, Writing - review and editing.

Conceptualization, Resources, Data curation, Software, Formal analysis, Supervision, Funding acquisition, Validation, Investigation, Visualization, Methodology, Writing - original draft, Project administration, Writing - review and editing.

Additional files

Supplementary file 1. Summary of statistics, rates, and probabilities for each experimental condition presented in this study.
elife-70968-supp1.xls (54KB, xls)
Supplementary file 2. Summary of statistics, rates, and probabilities for each experimental condition presented in this study.
elife-70968-supp2.xls (46KB, xls)
Transparent reporting form

Data availability

We provide two summary tables (Supplementary files 1 and 2) containing all the statistical information and parameter values extracted from the analysis, with their respective error estimates, and in which figures they are represented.

References

  1. Agostini ML, Andres EL, Sims AC, Graham RL, Sheahan TP, Lu X, Smith EC, Case JB, Feng JY, Jordan R, Ray AS, Cihlar T, Siegel D, Mackman RL, Clarke MO, Baric RS, Denison MR, Gallagher T, Enjuanes L. Coronavirus susceptibility to the antiviral remdesivir (GS-5734) Is mediated by the viral polymerase and the proofreading exoribonuclease. mBio. 2018;9:00221-18. doi: 10.1128/mBio.00221-18. [DOI] [PMC free article] [PubMed] [Google Scholar]
  2. Arnold JJ, Sharma SD, Feng JY, Ray AS, Smidansky ED, Kireeva ML, Cho A, Perry J, Vela JE, Park Y, Xu Y, Tian Y, Babusis D, Barauskus O, Peterson BR, Gnatt A, Kashlev M, Zhong W, Cameron CE. Sensitivity of mitochondrial transcription and resistance of RNA polymerase II dependent nuclear transcription to antiviral ribonucleosides. PLOS Pathogens. 2012;8:e1003030. doi: 10.1371/journal.ppat.1003030. [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. Bera SC, Seifert M, Kirchdoerfer RN, van Nies P, Wubulikasimu Y, Quack S, Papini FS, Arnold JJ, Canard B, Cameron CE, Depken M, Dulin D. The nucleotide addition cycle of the SARS-CoV-2 polymerase. Cell Reports. 2021;36:109650. doi: 10.1016/j.celrep.2021.109650. [DOI] [PMC free article] [PubMed] [Google Scholar]
  4. Bouvet M, Imbert I, Subissi L, Gluais L, Canard B, Decroly E. RNA 3'-end mismatch excision by the severe acute respiratory syndrome coronavirus nonstructural protein nsp10/nsp14 exoribonuclease complex. PNAS. 2012;109:9372–9377. doi: 10.1073/pnas.1201130109. [DOI] [PMC free article] [PubMed] [Google Scholar]
  5. Bravo JPK, Dangerfield TL, Taylor DW, Johnson KA. Remdesivir is a delayed translocation inhibitor of SARS-CoV-2 replication. Molecular Cell. 2021;81:1548–1552. doi: 10.1016/j.molcel.2021.01.035. [DOI] [PMC free article] [PubMed] [Google Scholar]
  6. Chen J, Malone B, Llewellyn E, Grasso M, Shelton PMM, Olinares PDB, Maruthi K, Eng ET, Vatandaslar H, Chait BT, Kapoor TM, Darst SA, Campbell EA. Structural basis for Helicase-Polymerase coupling in the SARS-CoV-2 Replication-Transcription complex. Cell. 2020;182:1560–1573. doi: 10.1016/j.cell.2020.07.033. [DOI] [PMC free article] [PubMed] [Google Scholar]
  7. Chien M, Anderson TK, Jockusch S, Tao C, Li X, Kumar S, Russo JJ, Kirchdoerfer RN, Ju J. Nucleotide analogues as inhibitors of SARS-CoV-2 polymerase, a key drug target for COVID-19. Journal of Proteome Research. 2020;19:4690–4697. doi: 10.1021/acs.jproteome.0c00392. [DOI] [PMC free article] [PubMed] [Google Scholar]
  8. Cnossen JP, Dulin D, Dekker NH. An optimized software framework for real-time, high-throughput tracking of spherical beads. Review of Scientific Instruments. 2014;85:103712. doi: 10.1063/1.4898178. [DOI] [PubMed] [Google Scholar]
  9. Cowan G. Statistical Data Analysis. Oxford University Press; 1998. [Google Scholar]
  10. Dangerfield TL, Huang NZ, Johnson KA. Remdesivir is effective in combating COVID-19 because it is a better substrate than ATP for the viral RNA-Dependent RNA polymerase. iScience. 2020;23:101849. doi: 10.1016/j.isci.2020.101849. [DOI] [PMC free article] [PubMed] [Google Scholar]
  11. Dulin D, Vilfan ID, Berghuis BA, Hage S, Bamford DH, Poranen MM, Depken M, Dekker NH. Elongation-Competent pauses govern the fidelity of a viral RNA-Dependent RNA polymerase. Cell Reports. 2015a;10:983–992. doi: 10.1016/j.celrep.2015.01.031. [DOI] [PubMed] [Google Scholar]
  12. Dulin D, Berghuis BA, Depken M, Dekker NH. Untangling reaction pathways through modern approaches to high-throughput single-molecule force-spectroscopy experiments. Current Opinion in Structural Biology. 2015b;34:116–122. doi: 10.1016/j.sbi.2015.08.007. [DOI] [PubMed] [Google Scholar]
  13. Dulin D, Vilfan ID, Berghuis BA, Poranen MM, Depken M, Dekker NH. Backtracking behavior in viral RNA-dependent RNA polymerase provides the basis for a second initiation site. Nucleic Acids Research. 2015c;12:1098–1099. doi: 10.1093/nar/gkv1098. [DOI] [PMC free article] [PubMed] [Google Scholar]
  14. Dulin D, Arnold JJ, van Laar T, Oh HS, Lee C, Perkins AL, Harki DA, Depken M, Cameron CE, Dekker NH. Signatures of nucleotide analog incorporation by an RNA-Dependent RNA polymerase revealed using High-Throughput magnetic tweezers. Cell Reports. 2017;21:1063–1076. doi: 10.1016/j.celrep.2017.10.005. [DOI] [PMC free article] [PubMed] [Google Scholar]
  15. Eckerle LD, Lu X, Sperry SM, Choi L, Denison MR. High fidelity of murine hepatitis virus replication is decreased in nsp14 exoribonuclease mutants. Journal of Virology. 2007;81:12135–12144. doi: 10.1128/JVI.01296-07. [DOI] [PMC free article] [PubMed] [Google Scholar]
  16. Ferron F, Subissi L, Silveira De Morais AT, Le NTT, Sevajol M, Gluais L, Decroly E, Vonrhein C, Bricogne G, Canard B, Imbert I. Structural and molecular basis of mismatch correction and Ribavirin excision from coronavirus RNA. PNAS. 2018;115:E162–E171. doi: 10.1073/pnas.1718806115. [DOI] [PMC free article] [PubMed] [Google Scholar]
  17. Furuta Y, Takahashi K, Shiraki K, Sakamoto K, Smee DF, Barnard DL, Gowen BB, Julander JG, Morrey JD. T-705 (favipiravir) and related compounds: novel broad-spectrum inhibitors of RNA viral infections. Antiviral Research. 2009;82:95–102. doi: 10.1016/j.antiviral.2009.02.198. [DOI] [PMC free article] [PubMed] [Google Scholar]
  18. Gao Y, Yan L, Huang Y, Liu F, Zhao Y, Cao L, Wang T, Sun Q, Ming Z, Zhang L, Ge J, Zheng L, Zhang Y, Wang H, Zhu Y, Zhu C, Hu T, Hua T, Zhang B, Yang X, Li J, Yang H, Liu Z, Xu W, Guddat LW, Wang Q, Lou Z, Rao Z. Structure of the RNA-dependent RNA polymerase from COVID-19 virus. Science. 2020;368:779–782. doi: 10.1126/science.abb7498. [DOI] [PMC free article] [PubMed] [Google Scholar]
  19. Gizzi AS, Grove TL, Arnold JJ, Jose J, Jangra RK, Garforth SJ, Du Q, Cahill SM, Dulyaninova NG, Love JD, Chandran K, Bresnick AR, Cameron CE, Almo SC. A naturally occurring antiviral ribonucleotide encoded by the human genome. Nature. 2018;558:610–614. doi: 10.1038/s41586-018-0238-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  20. Gohara DW, Arnold JJ, Cameron CE. Poliovirus RNA-dependent RNA polymerase (3Dpol): kinetic, thermodynamic, and structural analysis of ribonucleotide selection. Biochemistry. 2004;43:5149–5158. doi: 10.1021/bi035429s. [DOI] [PMC free article] [PubMed] [Google Scholar]
  21. Gordon CJ, Tchesnokov EP, Feng JY, Porter DP, Götte M. The antiviral compound remdesivir potently inhibits RNA-dependent RNA polymerase from middle east respiratory syndrome coronavirus. Journal of Biological Chemistry. 2020a;295:4773–4779. doi: 10.1074/jbc.AC120.013056. [DOI] [PMC free article] [PubMed] [Google Scholar]
  22. Gordon CJ, Tchesnokov EP, Woolner E, Perry JK, Feng JY, Porter DP, Götte M. Remdesivir is a direct-acting antiviral that inhibits RNA-dependent RNA polymerase from severe acute respiratory syndrome coronavirus 2 with high potency. Journal of Biological Chemistry. 2020b;295:6785–6797. doi: 10.1074/jbc.RA120.013679. [DOI] [PMC free article] [PubMed] [Google Scholar]
  23. Hillen HS, Kokic G, Farnung L, Dienemann C, Tegunov D, Cramer P. Structure of replicating SARS-CoV-2 polymerase. Nature. 2020;584:154–156. doi: 10.1038/s41586-020-2368-8. [DOI] [PubMed] [Google Scholar]
  24. Jockusch S, Tao C, Li X, Anderson TK, Chien M, Kumar S, Russo JJ, Kirchdoerfer RN, Ju J. A library of nucleotide analogues terminate RNA synthesis catalyzed by polymerases of coronaviruses that cause SARS and COVID-19. Antiviral Research. 2020;180:104857. doi: 10.1016/j.antiviral.2020.104857. [DOI] [PMC free article] [PubMed] [Google Scholar]
  25. Kayali Z, Schmidt WN. Finally sofosbuvir: an oral anti-HCV drug with wide performance capability. Pharmacogenomics and Personalized Medicine. 2014;7:387–398. doi: 10.2147/PGPM.S52629. [DOI] [PMC free article] [PubMed] [Google Scholar]
  26. Kirchdoerfer RN, Ward AB. Structure of the SARS-CoV nsp12 polymerase bound to nsp7 and nsp8 co-factors. Nature Communications. 2019;10:2342. doi: 10.1038/s41467-019-10280-3. [DOI] [PMC free article] [PubMed] [Google Scholar]
  27. Kokic G, Hillen HS, Tegunov D, Dienemann C, Seitz F, Schmitzova J, Farnung L, Siewert A, Höbartner C, Cramer P. Mechanism of SARS-CoV-2 polymerase stalling by remdesivir. Nature Communications. 2021;12:279. doi: 10.1038/s41467-020-20542-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
  28. Liu C, Shi W, Becker ST, Schatz DG, Liu B, Yang Y. Structural basis of mismatch recognition by a SARS-CoV-2 proofreading enzyme. Science. 2021;27:eabi9310. doi: 10.1126/science.abi9310. [DOI] [PMC free article] [PubMed] [Google Scholar]
  29. Malone B, Chen J, Wang Q, Llewellyn E, Choi YJ, Olinares PDB, Cao X, Hernandez C, Eng ET, Chait BT, Shaw DE, Landick R, Darst SA, Campbell EA. Structural basis for backtracking by the SARS-CoV-2 replication-transcription complex. PNAS. 2021;118:e2102516118. doi: 10.1073/pnas.2102516118. [DOI] [PMC free article] [PubMed] [Google Scholar]
  30. Ogando NS, Ferron F, Decroly E, Canard B, Posthuma CC, Snijder EJ. The curious case of the nidovirus exoribonuclease: its role in RNA synthesis and replication fidelity. Frontiers in Microbiology. 2019;10:10. doi: 10.3389/fmicb.2019.01813. [DOI] [PMC free article] [PubMed] [Google Scholar]
  31. Ogando NS, Zevenhoven-Dobbe JC, van der Meer Y, Bredenbeek PJ, Posthuma CC, Snijder EJ. The enzymatic activity of the nsp14 exoribonuclease is critical for replication of MERS-CoV and SARS-CoV-2. Journal of Virology. 2020;94:01246-20. doi: 10.1128/JVI.01246-20. [DOI] [PMC free article] [PubMed] [Google Scholar]
  32. Ostrofet E, Papini FS, Dulin D. Correction-free force calibration for magnetic tweezers experiments. Scientific Reports. 2018;8:15920. doi: 10.1038/s41598-018-34360-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  33. Papini FS, Seifert M, Dulin D. High-yield fabrication of DNA and RNA constructs for single molecule force and torque spectroscopy experiments. Nucleic Acids Research. 2019;47:e144. doi: 10.1093/nar/gkz851. [DOI] [PMC free article] [PubMed] [Google Scholar]
  34. Press WH, Flannery BP, Teukolsky SA, Vetterling WT. Numerical recipes in c: the art of scientific computing. Cambridge University Press; 1992. [Google Scholar]
  35. Pruijssers AJ, George AS, Schäfer A, Leist SR, Gralinksi LE, Dinnon KH, Yount BL, Agostini ML, Stevens LJ, Chappell JD, Lu X, Hughes TM, Gully K, Martinez DR, Brown AJ, Graham RL, Perry JK, Du Pont V, Pitts J, Ma B, Babusis D, Murakami E, Feng JY, Bilello JP, Porter DP, Cihlar T, Baric RS, Denison MR, Sheahan TP. Remdesivir inhibits SARS-CoV-2 in human lung cells and chimeric SARS-CoV expressing the SARS-CoV-2 RNA polymerase in mice. Cell Reports. 2020;32:107940. doi: 10.1016/j.celrep.2020.107940. [DOI] [PMC free article] [PubMed] [Google Scholar]
  36. Pruijssers AJ, Denison MR. Nucleoside analogues for the treatment of coronavirus infections. Current Opinion in Virology. 2019;35:57–62. doi: 10.1016/j.coviro.2019.04.002. [DOI] [PMC free article] [PubMed] [Google Scholar]
  37. Robson F, Khan KS, Le TK, Paris C, Demirbag S, Barfuss P, Rocchi P, Ng WL. Coronavirus RNA proofreading: molecular basis and therapeutic targeting. Molecular Cell. 2020;79:710–727. doi: 10.1016/j.molcel.2020.07.027. [DOI] [PMC free article] [PubMed] [Google Scholar]
  38. Seifert M, van Nies P, Papini FS, Arnold JJ, Poranen MM, Cameron CE, Depken M, Dulin D. Temperature controlled high-throughput magnetic tweezers show striking difference in activation energies of replicating viral RNA-dependent RNA polymerases. Nucleic Acids Research. 2020;48:5591–5602. doi: 10.1093/nar/gkaa233. [DOI] [PMC free article] [PubMed] [Google Scholar]
  39. Shannon A, Selisko B, Le NT, Huchting J, Touret F, Piorkowski G, Fattorini V, Ferron F, Decroly E, Meier C, Coutard B, Peersen O, Canard B. Rapid incorporation of favipiravir by the fast and permissive viral RNA polymerase complex results in SARS-CoV-2 lethal mutagenesis. Nature Communications. 2020a;11:4682. doi: 10.1038/s41467-020-18463-z. [DOI] [PMC free article] [PubMed] [Google Scholar]
  40. Shannon A, Selisko B, Le N, Huchting J, Touret F, Piorkowski G. Favipiravir strikes the SARS-CoV-2 at its achilles heel the RNA polymerase. bioRxiv. 2020b doi: 10.1101/2020.05.15.098731. [DOI] [PMC free article] [PubMed]
  41. Siegel D, Hui HC, Doerffler E, Clarke MO, Chun K, Zhang L, Neville S, Carra E, Lew W, Ross B, Wang Q, Wolfe L, Jordan R, Soloveva V, Knox J, Perry J, Perron M, Stray KM, Barauskas O, Feng JY, Xu Y, Lee G, Rheingold AL, Ray AS, Bannister R, Strickley R, Swaminathan S, Lee WA, Bavari S, Cihlar T, Lo MK, Warren TK, Mackman RL. Discovery and synthesis of a phosphoramidate prodrug of a pyrrolo[2,1-f][triazin-4-amino] Adenine C-Nucleoside (GS-5734) for the treatment of ebola and emerging viruses. Journal of Medicinal Chemistry. 2017;60:1648–1661. doi: 10.1021/acs.jmedchem.6b01594. [DOI] [PubMed] [Google Scholar]
  42. Smith EC, Blanc H, Surdel MC, Vignuzzi M, Denison MR. Coronaviruses lacking exoribonuclease activity are susceptible to lethal mutagenesis: evidence for proofreading and potential therapeutics. PLOS Pathogens. 2013;9:e1003565. doi: 10.1371/journal.ppat.1003565. [DOI] [PMC free article] [PubMed] [Google Scholar]
  43. Sofia MJ, Bao D, Chang W, Du J, Nagarathnam D, Rachakonda S, Reddy PG, Ross BS, Wang P, Zhang HR, Bansal S, Espiritu C, Keilman M, Lam AM, Steuer HM, Niu C, Otto MJ, Furman PA. Discovery of a β-d-2'-deoxy-2'-α-fluoro-2'-β-C-methyluridine nucleotide prodrug (PSI-7977) for the treatment of hepatitis C virus. Journal of Medicinal Chemistry. 2010;53:7202–7218. doi: 10.1021/jm100863x. [DOI] [PubMed] [Google Scholar]
  44. Subissi L, Posthuma CC, Collet A, Zevenhoven-Dobbe JC, Gorbalenya AE, Decroly E, Snijder EJ, Canard B, Imbert I. One severe acute respiratory syndrome coronavirus protein complex integrates processive RNA polymerase and exonuclease activities. PNAS. 2014;111:E3900–E3909. doi: 10.1073/pnas.1323705111. [DOI] [PMC free article] [PubMed] [Google Scholar]
  45. Traut TW. Physiological concentrations of purines and pyrimidines. Molecular and Cellular Biochemistry. 1994;140:1–22. doi: 10.1007/BF00928361. [DOI] [PubMed] [Google Scholar]
  46. Villalba B, Li J, Johnson KA. Resistance to excision determines efficiency of hepatitis C virus RNA-dependent RNA polymerase inhibition by nucleotide analogs. Journal of Biological Chemistry. 2020;295:10112–10124. doi: 10.1074/jbc.RA120.013422. [DOI] [PMC free article] [PubMed] [Google Scholar]
  47. Wang Q, Wu J, Wang H, Gao Y, Liu Q, Mu A, Ji W, Yan L, Zhu Y, Zhu C, Fang X, Yang X, Huang Y, Gao H, Liu F, Ge J, Sun Q, Yang X, Xu W, Liu Z, Yang H, Lou Z, Jiang B, Guddat LW, Gong P, Rao Z. Structural basis for RNA replication by the SARS-CoV-2 polymerase. Cell. 2020;182:417–428. doi: 10.1016/j.cell.2020.05.034. [DOI] [PMC free article] [PubMed] [Google Scholar]
  48. Xia H, Cao Z, Xie X, Zhang X, Chen JY, Wang H, Menachery VD, Rajsbaum R, Shi PY. Evasion of type I interferon by SARS-CoV-2. Cell Reports. 2020;33:108234. doi: 10.1016/j.celrep.2020.108234. [DOI] [PMC free article] [PubMed] [Google Scholar]
  49. Xie X, Muruato AE, Zhang X, Lokugamage KG, Fontes-Garfias CR, Zou J, Liu J, Ren P, Balakrishnan M, Cihlar T, Tseng CK, Makino S, Menachery VD, Bilello JP, Shi PY. A nanoluciferase SARS-CoV-2 for rapid neutralization testing and screening of anti-infective drugs for COVID-19. Nature Communications. 2020a;11:5214. doi: 10.1038/s41467-020-19055-7. [DOI] [PMC free article] [PubMed] [Google Scholar]
  50. Xie X, Muruato A, Lokugamage KG, Narayanan K, Zhang X, Zou J, Liu J, Schindewolf C, Bopp NE, Aguilar PV, Plante KS, Weaver SC, Makino S, LeDuc JW, Menachery VD, Shi PY. An infectious cDNA clone of SARS-CoV-2. Cell Host & Microbe. 2020b;27:841–848. doi: 10.1016/j.chom.2020.04.004. [DOI] [PMC free article] [PubMed] [Google Scholar]
  51. Yan L, Zhang Y, Ge J, Zheng L, Gao Y, Wang T, Jia Z, Wang H, Huang Y, Li M, Wang Q, Rao Z, Lou Z. Architecture of a SARS-CoV-2 mini replication and transcription complex. Nature Communications. 2020;11:5874. doi: 10.1038/s41467-020-19770-1. [DOI] [PMC free article] [PubMed] [Google Scholar]

Decision letter

Editor: Maria Spies1

In the interests of transparency, eLife publishes the most substantive revision requests and the accompanying author responses.

Acceptance summary:

The work presented in this paper may advance our understanding of an important class of anti-viral drugs (nucleoside analogs) that target viral polymerase enzymes by being directly incorporated into the product strand. This class of drugs is known to be quite diverse in their precise mechanisms of action, yet many of the particular details have remained elusive, often due to experimental limitations. The current study employs a single-molecule magnetic-tweezers platform to provide a new paradigm for the mechanism of action of drug remdesivir against the SARS-CoV-2 polymerase. The authors propose that remdesivir does not prevent the complete viral RNA synthesis but causes an increase in polymerase pausing and backtracking. This paper is of broad interest to readers and scientists working on SARS-CoV-2 and other RNA-based viruses. It will be also of interest to researchers studying RNA polymerase mechanisms and evolution.

Decision letter after peer review:

Thank you for submitting your article "Inhibition of SARS-CoV-2 polymerase by nucleotide analogs: a single molecule perspective" for consideration by eLife. Your article has been reviewed by 3 peer reviewers, and the evaluation has been overseen by Maria Spies as a Reviewing Editor and Aleksandra Walczak as the Senior Editor. The reviewers have opted to remain anonymous.

The reviewers have discussed their reviews with one another, and the Reviewing Editor has drafted this to help you prepare a revised submission.

All three reviewers and the reviewing editor agreed that the study is interesting, technically sound and has merit. All, however, thought that there are several overstatements that need to be tempered (below).

1) The practicality of the magnetic tweezer assay as a tool for drug discovery is overstated. Please change the verbiage.

2) Explain the significance and the mechanism of observed backtracking in the absence of the nuclease domain.

3) How the obtained results translate into more physiological conditions at zero force should be addressed.

4) The paper would benefit of including a table summarizing the effect of the different NA in the polymerase activity, and pointing out the main conclusions for each compound.

5) Address the reviewers' individual comments.

Reviewer #1:

This work investigated the mechanism of inhibition of SARS-CoV-2 polymerase by multiple nucleotide analogs using a high-throughput, single-molecule, magnetic tweezers platform. There was particular focus on the remdesivir (RDV) because it is the only FDA approved anti-coronavirus drug on the market at the time of this review. The study shows that remdesivir leads the polymerase to undergo a backtrack in which it moves back as much as 30 nucleotides from the last insertion. The results also show that RDV is not a chain terminator, which is consistent with prior work. In addition to RDV, the authors characterized other nucleotide analogs such as ddhCTP, 3'-dCTP, and Sofosbuvir-TP to propose that the location of the modification in the ribose or in the base dictates the catalytic pathway used for incorporation. The authors also propose that the use of magnetic tweezers is essential towards characterizing and discovering therapeutics that target viral polymerases.

Strengths:

A strength of the papers is the utilization of magnetic tweezers to characterize the polymerase at the single molecule level. This provides a unique method to capture less common or difficult to observe phenomena such as backtracking. Most bulk ensemble assays would have difficulty detecting these phenomena.

The characterization of multiple different types of nucleotides analogs to investigate the different mechanisms by which they could inhibit the polymerase is a strength of the paper. The authors elegantly utilize their system to show different pause states and backtracking of the polymerase.

In general, the paper is well written, and the data is clearly presented.

Weakness:

The experiments performed with the magnetic tweezers appear to not have contained the exonuclease domain. This domain would presumably be involved in removing nucleotide analogs that have been inserted and may alter the pause states or backtracking prevalence. For example, does the prevalence of backtracking increase when the exonuclease domain is not present. This is particularly important in regard to the RDV experiments.

A major claim for this study is the utilization of the magnetic tweezers "experimental paradigm" as being essential to the discovery and development of therapeutics to viral polymerases. In addition the authors state this approach is superior to bulk ensemble studies. This reviewer found these conclusions to be an overstatement and unnecessary. The use of magnetic tweezers is not amenable to all laboratories or an easy technique to implement within the therapeutic drug development. In general, the authors also overstate the power and feasibility of the magnetic tweezers in comparison to bulk ensemble studies. All assays have limitations, and the magnetic tweezers is no different in regards to being purified proteins, an in vitro approach, limitations in regards to feasibility for all users, ability to detect the amount of active protein, and multiple other reasons. This is a minor weakness of the paper that can be easily addressed because it detracts from the novelty of the studies.

1) The term backtracked is a bit confusing to this reviewer and likely will be to many other readers. When the polymerase backtracks does it remove the inserted nucleotides or just slide backwards. This should be clearly defined in this manuscript and a figure may help.

2) If the polymerase is back tracking within the cell, does it invoke the exonuclease activity to remove the nucleotide analog and continue extension? It appears the experiments were performed with a polymerase lacking the exonuclease domain. This raises questions if the extensive backtracking with RDV is a result of the missing exonuclease domain. Can the same experiment be performed with the exonuclease proficient protein to verify the general trend of deep backtracking by RDV?

3) What is the active fraction of enzyme used in these assays? This is an important control to ensure the protein preps contain a high percentage of active enzyme and does not contain a subpopulation of inactive enzyme. Especially given reports of His-tagged protein resulting in lower activity (see ref 21, PMID: 33283177), which was the purification scheme used in this study.

4) There are a number of presentation issues with the manuscript that distract from the scientific results presented, which are interesting. At times it often felt this was to enhance the perceived impact of the paper or method used. I have listed a few below and would suggest the authors alter the tone.

a. The authors state their study definitely proves the RDV-TP is not a chain terminator in the discussion and results. This implies that this is novel or that other groups have reported RDV-TP to be a chain terminator(?). However, in the very next sentence the authors point out that RDV-TP was recently reported to not be a chain terminator in corroborating studies (ref 29,39). This should be clarified for the reader.

b. In the last paragraph of the discussion the authors state, "High-throughput, real-time magnetic tweezers present numerous advantages to study RdRp elongation dynamics over a discontinuous assay, and therefore demand integration of such an assay into any pipeline investigating the selectivity and/or mechanism of action of NAs." This statement is not accurate in terms of "demanding integration" and the "numerous advantages over a discontinuous assay" is subjective. I would suggest removing or altering the tone of these statements. The approach is powerful and provides mechanistic insight but doesn't demand integration. Furthermore, each assay has benefits that another type of assay may lack. The commentary about one assay being better than another does not strengthen the paper.

c. In the discussion the authors have a paragraph dedicated to two ensemble studies that showed that RDV-TP is better inserted than ATP (ref 17 and 21). The authors generally state these studies did not mimic in vivo conditions or utilize saturating concentration of ATP. This seems to all be in regard to claiming that their magnetic tweezers approach is superior to the ensemble. However, the conclusions from both of the prior ensemble studies in regard to RDV-TP being better inserted than ATP appear to be sound, and this was not addressed in this study, nor can it be (easily) with the magnetic tweezers approach. Therefore, the conclusions from the ensemble studies are accurate in this reviewer's opinion and the paragraph in the discussion should be removed/altered. In addition, the Johnson lab doesn't need a competing concentration of ATP to determine the kinetic values and thus incorporation rate based on the design of the experiments. It also is not clear what the authors mean by the ensemble studies are performed at subsaturating concentrations of substrate. These experiments are purposely designed to be done this way and the nucleotide concentration was at a saturating concentration of the pol/DNA complex which was rate limited by the DNA concentration. Finally, neither the ensemble or magnetic tweezers approaches are representative of in vivo conditions as they are both in vitro with their own limitations.

Reviewer #2:

This study investigates the impact of remdesivir (RDV) and other nucleotide analogs (NAs), 3'-dATP, 3'-dUTP, 3'-dCTP, Sofosbuvir-TP, ddhCTP, and T-1106-TP, on RNA synthesis by the SARS-CoV-2 polymerase using magnetic tweezer. This technique allows to directly quantify termination of viral synthesis, pausing or stalling of the polymerase, thus, defining the effect of these NAs on viral synthesis. The work includes good quality data and nicely stablishes an assay to follow the activity of the SARS-CoV-2 RNA-dependent RNA polymerase. However, the basis of the assay and theory was largely presented before by the authors in Ref 22 and 23 (and other references therein). The main result here is that RDV incorporation does not prevent the complete viral RNA synthesis but causes an increase of pausing and back-tracking. This contrasts with a clear signature of synthesis termination induced by 3'-dATP. The work is complemented with the characterization of other NAs. Despite these results are of merit, I do not see this work to present a sufficient advance of our current knowledge. How these results translate into more physiological conditions at zero force should be addressed. The rationale of testing other NAs apart from the mere systematic characterization of other compounds is unclear. Similarly, I do not see the benefits of adding cell experiments with three compounds and experiments with the nsp14 mutant to address proofreading because they were inconclusive.

1) Abstract. The term "deep backtrack" appearing in the abstract is unclear. Moreover, I would also avoid the use of word "unambiguously" in the abstract. I guess a claim on something cannot be ambiguous.

2) The force at which MT experiments were done is important. Although mentioned in the Methods, the force should be also indicated in Figure 1A, and in the main text. This will help understand the assay and movement of the bead upon nucleotide incorporation. The mechanical characterization of the initial (ssRNA) and final (dsRNA) substrates should be included as supplementary.

3) Experiments were done at 35 and 25 pN. These are far from physiological forces, likely to be near zero. How would this might affect the reported conclusions? It would be good to complement with some (bulk?) experiments done at zero or near zero force, to backup for instance some of the claims on product length and termination. Additionally, I expect the equivalent MT experiment at low force to result in the increase of bead vertical position due to the conversion of ssRNA to dsRNA. Did the authors try that?

4) Related to previous point, the fact that results were similar at 25 and 35 pN is not sufficient to claim that "tension does not play a significant role in RDV-TP incorporation". This claim is also repeated for other nucleotides analogues. Authors tested very particular conditions and such general conclusion cannot be extracted from that data.

5) Protein purification. Biochemical characterization of the purified proteins should be included, for instance a SDS-PAGE with purified proteins.

6) Figure 2 —figure supplement 1 is cited before than Figure 2. Not very logical. Suggest perhaps including the structure of each compounds in the main figure where used?

7) Authors claim that their assay works at saturating NTP concentration, an issue they believe is problematic with other published works (Refs 17 and 21). Could the authors determine the ratio of incorporation of RDV-TP versus ATP to contrast with the other published works (Refs 17, 21)?

8) Authors claim incorporation of RDV-TP leads to backtracking, but not to proofreading. This is a bit confusing. What would it be the function of backtracking here?

9) The paper would benefit of including a table summarizing the effect of the different NA in the polymerase activity, and pointing out the main conclusions for each compound.

10) The description of the model and the analysis of dwell time distributions is too technical and difficult to follow in its current form. Equations are not numbered, terminology not defined, a figure is embedded within the text… I find all these developments more appropriate for a more specialized journal.

11) I guess the experiments using cells infected with SARS-CoV2 required a special biohazard security lab and specific measures. Please indicate all these details.

12) I do not see the benefit of including these cell experiments (Figure 6 – S3-S4), in their present form. Perhaps, a proper motivation is missing. The experiments with the nsp14 mutant are not conclusive and do not see the reason to include them.

Reviewer #3:

This manuscript focuses on understanding the mechanism of action of remdesivir in the inhibition of SARS-Cov2 polymerase, using single molecule methods. The findings are highly original, significant and surprising. The approach is highly robust and supported by a range of orthogonal studies. Overall, these findings should help those engaged directly in drug discovery by providing a critical foundational understanding for the action of remdesivir.

The research described in this manuscript has several findings that significantly impact the broader field polymerase inhibition. First, the authors were able to show using single molecule methods that remdesivir-TP incorporation leads to polymerase backtrack. This is important because the pause is long enough that an ensemble assay could mistake this backtrack for a termination event. Secondly, the researchers found the effective incorporation of remdesivir-TP was determined by its absolute concentration. This suggests remdesivir-TP and similar nucleotide analogs incorporate via the SNA or VSNA pathway and would be more likely to add to the RNA chain when substrate concentration is low (independent of stoichiometry with the competing native nucleotide). Thirdly, the researchers found the effective incorporation rate of obligatory terminators was affected by the stoichiometry of their competing native nucleotide rather than their absolute concentration. This suggests that obligatory terminators are incorporated via the NAB pathway. The pausing that the researchers observed in the polymerase elongation kinetics have recently been demonstrated by two other groups. However, this study improved upon the assay conditions used by other researchers to recapitulate in vivo conditions and remove bias from kinetics measurements.

The authors highlighted the issues with remdesivir, tested other nucleotide analogs, and proposed a better alternative based on their assays (ddhCTP). Interestingly, the ddhCTP didn't actually work in infected cells. However, the authors presented a few theories on why it didn't work and said they plan to follow up to elucidate why it didn't work in cells. I think those results will be very interesting for the larger community working in this area. It's clear that the authors made a substantial enough contribution on the mechanism of inhibition of SARS Cov2 polymerase to merit publication in eLife, independent of the work on the "improved" antiviral candidate.

It would have been useful to clarify for the reader the pharmaceutical import of the putative delayed chain termination (or pausing) relative to actual chemical chain termination. In other words, I'm assuming that in both cases the viral genome is considered to be non-transcribed (in that a chemical agent has been incorporated into the growing strand). This is true for most compounds in this broad class of anti-virals. The issues are usually surrounding the width of the therapeutic index and the degree to which resistant mutants arise.

Overall, this manuscript constitutes a major advance in our understanding of chain termination in polymerases, and provides deep insights into the mechanism of action of remdesivir, which may contribute to further drug discovery efforts targeting this polymerase. Additionally, the authors have highlighted and addressed issues in the methodologies of previous mechanistic studies that led others to erroneous conclusions.

eLife. 2021 Oct 7;10:e70968. doi: 10.7554/eLife.70968.sa2

Author response


Reviewer #1:

This work investigated the mechanism of inhibition of SARS-CoV-2 polymerase by multiple nucleotide analogs using a high-throughput, single-molecule, magnetic tweezers platform. There was particular focus on the remdesivir (RDV) because it is the only FDA approved anti-coronavirus drug on the market at the time of this review. The study shows that remdesivir leads the polymerase to undergo a backtrack in which it moves back as much as 30 nucleotides from the last insertion. The results also show that RDV is not a chain terminator, which is consistent with prior work. In addition to RDV, the authors characterized other nucleotide analogs such as ddhCTP, 3'-dCTP, and Sofosbuvir-TP to propose that the location of the modification in the ribose or in the base dictates the catalytic pathway used for incorporation. The authors also propose that the use of magnetic tweezers is essential towards characterizing and discovering therapeutics that target viral polymerases.

Strengths:

A strength of the papers is the utilization of magnetic tweezers to characterize the polymerase at the single molecule level. This provides a unique method to capture less common or difficult to observe phenomena such as backtracking. Most bulk ensemble assays would have difficulty detecting these phenomena.

The characterization of multiple different types of nucleotides analogs to investigate the different mechanisms by which they could inhibit the polymerase is a strength of the paper. The authors elegantly utilize their system to show different pause states and backtracking of the polymerase.

In general, the paper is well written, and the data is clearly presented.

The authors thank the Reviewer for the strong appraisal of our work.

Weakness:

The experiments performed with the magnetic tweezers appear to not have contained the exonuclease domain. This domain would presumably be involved in removing nucleotide analogs that have been inserted and may alter the pause states or backtracking prevalence. For example, does the prevalence of backtracking increase when the exonuclease domain is not present. This is particularly important in regard to the RDV experiments.

To date, no laboratory has been able to couple the polymerase complex with the proofreading complex. Indeed, we have entire five-year R01 grant to pursue this objective. Just like all proofreading polymerases studied before this one, it is imperative to establish a baseline with exonuclease deficient state prior to adding that component. Even before we add the exonuclease, it will be important to add the helicase to determine if it can assist the polymerase with dsRNA, because its strand-displacement activity is weak.

A major claim for this study is the utilization of the magnetic tweezers "experimental paradigm" as being essential to the discovery and development of therapeutics to viral polymerases. In addition the authors state this approach is superior to bulk ensemble studies. This reviewer found these conclusions to be an overstatement and unnecessary. The use of magnetic tweezers is not amenable to all laboratories or an easy technique to implement within the therapeutic drug development. In general, the authors also overstate the power and feasibility of the magnetic tweezers in comparison to bulk ensemble studies. All assays have limitations, and the magnetic tweezers is no different in regards to being purified proteins, an in vitro approach, limitations in regards to feasibility for all users, ability to detect the amount of active protein, and multiple other reasons. This is a minor weakness of the paper that can be easily addressed because it detracts from the novelty of the studies.

We feel that it is important to avoid an either-or scenario. We apologize for evoking a negative reaction with our statement, as we were only trying to emphasize how illuminating the magnetic-tweezers approach can be. It was not our intention to rule out the need for bulk methods at the bench top or using quench-flow or stopped-flow devices.

We have edited the text in l.83-87 to convey the following:

“Magnetic tweezers permit the dynamics of an elongating polymerase/polymerase complex to be monitored in real time and the impact of nucleotide analogues to be monitored in the presence of all four natural nucleotides in their physiological concentration ranges. Here, we present a magnetic tweezers assay to provide insights into the mechanism and efficacy of current and underexplored NAs on the coronavirus polymerase.”

1) The term backtracked is a bit confusing to this reviewer and likely will be to many other readers. When the polymerase backtracks does it remove the inserted nucleotides or just slide backwards. This should be clearly defined in this manuscript and a figure may help.

As ‘Backtracking’ is a term commonly used in the field of RNA polymerase, and that we have introduced it in our single molecule investigations of several viral RdRp’s (Dulin et al., Cell Reports 2015; 2017; NAR 2015; Seifert et al., NAR 2020), including SARS-CoV-2 polymerase (Bera et al., BioRxiv 2021), which was also structurally characterized (Malone et al., PNAS 2021), we did not think it would be confusing. We have added a schematic in Figure 3G and amended the text with in l.125 to clarify this concept:

“while the long-lived pauses relate to a catalytically incompetent polymerase backtrack state, where the polymerase diffuses backward on the template strand, leading the product strand 3’-end to unwind and exit via the NTP channel without cleavage.”

2) If the polymerase is back tracking within the cell, does it invoke the exonuclease activity to remove the nucleotide analog and continue extension? It appears the experiments were performed with a polymerase lacking the exonuclease domain. This raises questions if the extensive backtracking with RDV is a result of the missing exonuclease domain. Can the same experiment be performed with the exonuclease proficient protein to verify the general trend of deep backtracking by RDV?

The connection from backtrack to proofreading was done in a structural paper (Malone et al., PNAS 2021) as an analogy to the cellular multi-subunits DNA-dependent RNA polymerases, to which the coronavirus polymerase is evolutionary and structurally not related. Backtracking is not part of the proofreading process for A-family polymerases, to which the coronavirus polymerase is related. Therefore, we do not make the connection between backtracking and proofreading, as there is neither functional nor structural evidence for this function. Nsp14 is not a domain of the polymerase, but an enzyme by itself that putatively associates to the polymerase complex. To date, there has been no publication with a functional assay combining the polymerase and the exonuclease (nsp14) proving the two enzymes were acting as a complex. Furthermore, there isn’t a clear understanding on the nature and structure of a polymerase complex including nsp14 (and maybe nsp10). The only activity observed was on separate enzymes, showing that nsp14 efficiently excises 3’-end RNA strand in a dsRNA configuration, much less efficiently on a single stranded RNA (Liu et al., Science 2021), as it would be the case for a backtracked RNA. A single molecule assay studying the coronavirus polymerase in complex with nsp14 would be a study by itself and extend beyond the scope of the present work.

3) What is the active fraction of enzyme used in these assays? This is an important control to ensure the protein preps contain a high percentage of active enzyme and does not contain a subpopulation of inactive enzyme. Especially given reports of His-tagged protein resulting in lower activity (see ref 21, PMID: 33283177), which was the purification scheme used in this study.

In the Materials and methods (l. 540-546), we replaced “Eluted proteins” with “Eluted nsp12, nsp7 and nsp8”, which now reads as:

“Eluted nsp12, nsp7 and nsp8 were digested with 1% w/w TEV protease during overnight room temperature dialysis (10 mM Tris pH 8.0, 300 mM NaCl, 2 mM DTT). Digested proteins were passed back over Ni-NTA to remove undigested protein before concentrating the proteins by ultrafiltration. Nsp7 and nsp8 proteins were further purified by size exclusion chromatography using a Superdex 200 Increase 10/300 column (GE Life Sciences). Purified proteins were concentrated by ultrafiltration prior to flash freezing with liquid nitrogen.”

Our assay demonstrates ~80% activity in the conditions described in the Materials and methods. This means 80% of all the tethers in the field of view (hundreds, see Figure 1—figure supplement 1D) show efficient and consistent primer elongation activity, and support that 80% of the complex that forms at the primer template are elongation competent. We also showed in the companion article (attached with the present submission, https://doi.org/10.1101/2021.03.27.437309) that we were able to form stable and processive elongation complex.

Furthermore, the added benefit of a single-molecule approach is that only functional complexes are observed, so the fraction of “active” enzyme is not as important for investigations using this method as it would be for bulk assays.

4) There are a number of presentation issues with the manuscript that distract from the scientific results presented, which are interesting. At times it often felt this was to enhance the perceived impact of the paper or method used. I have listed a few below and would suggest the authors alter the tone.

a. The authors state their study definitely proves the RDV-TP is not a chain terminator in the discussion and results. This implies that this is novel or that other groups have reported RDV-TP to be a chain terminator(?). However, in the very next sentence the authors point out that RDV-TP was recently reported to not be a chain terminator in corroborating studies (ref 29,39). This should be clarified for the reader.

We take this opportunity to mention again that our study was the first to report that RDV-TP is neither a chain terminator nor a delayed chain terminator. We have amended the text in l.416-419 for clarity such as:

“Our study shows that RDV-TP is not a delayed chain terminator at physiological concentration of all NTPs, but instead induces pauses in the polymerase elongation kinetics that are easily overcome at saturating NTP concentration (Figure 3). Since our preprint was published on BioRxiv in August 2020, our finding has been corroborated by two recent studies”

b. In the last paragraph of the discussion the authors state, "High-throughput, real-time magnetic tweezers present numerous advantages to study RdRp elongation dynamics over a discontinuous assay, and therefore demand integration of such an assay into any pipeline investigating the selectivity and/or mechanism of action of NAs." This statement is not accurate in terms of "demanding integration" and the "numerous advantages over a discontinuous assay" is subjective. I would suggest removing or altering the tone of these statements. The approach is powerful and provides mechanistic insight but doesn't demand integration. Furthermore, each assay has benefits that another type of assay may lack. The commentary about one assay being better than another does not strengthen the paper.

Reviewer #1 is right that single-molecule high-throughput magnetic tweezers and discontinuous assays present different advantages, and we did not mean to say our approach is better than discontinuous assays. For example, discontinuous assays are the best approach to characterize template sequence dependence kinetics. We agree that our writing was not specific enough and may be misleading. We have amended the introduction such as:

“Magnetic tweezers permit the dynamics of an elongating polymerase/polymerase complex to be monitored in real time and the impact of nucleotide analogues to be monitored in the presence of all four natural nucleotides in their physiological concentration ranges. Here, we present a magnetic tweezers assay to provide insights into the mechanism and efficacy of current and underexplored NAs on the coronavirus polymerase.”

And we have modified the discussion in l.518-521 to be more specific on the advantages of magnetic tweezers:

“High-throughput, real-time magnetic tweezers present numerous advantages to study RdRp elongation dynamics, such as monitoring polymerase position with high spatiotemporal resolution while elongating kilobases long templates in the presence of saturating concentration of competing natural nucleotides, and therefore provide complementary information to discontinuous assays to understand the selectivity and/or mechanism of action of NAs.”

c. In the discussion the authors have a paragraph dedicated to two ensemble studies that showed that RDV-TP is better inserted than ATP (ref 17 and 21). The authors generally state these studies did not mimic in vivo conditions or utilize saturating concentration of ATP. This seems to all be in regard to claiming that their magnetic tweezers approach is superior to the ensemble. However, the conclusions from both of the prior ensemble studies in regard to RDV-TP being better inserted than ATP appear to be sound, and this was not addressed in this study, nor can it be (easily) with the magnetic tweezers approach. Therefore, the conclusions from the ensemble studies are accurate in this reviewer's opinion and the paragraph in the discussion should be removed/altered. In addition, the Johnson lab doesn't need a competing concentration of ATP to determine the kinetic values and thus incorporation rate based on the design of the experiments. It also is not clear what the authors mean by the ensemble studies are performed at subsaturating concentrations of substrate. These experiments are purposely designed to be done this way and the nucleotide concentration was at a saturating concentration of the pol/DNA complex which was rate limited by the DNA concentration. Finally, neither the ensemble or magnetic tweezers approaches are representative of in vivo conditions as they are both in vitro with their own limitations.

Here again, it was not our intention to say that magnetic tweezers are better than ensemble approaches. We believe these are complementary approaches. We have amended the discussion paragraph in l.461-474, which now reads:

“Two recent ensemble kinetic studies investigating the mechanism of action of RDV-TP on SARS-CoV-2 elongation kinetics have recently been published. In the first one, the experiments were performed at submicromolar concentration of NTPs, and showed that RDV-TP is incorporated 3-fold better than ATP in such condition. In the second one, the authors also claimed that RDV-TP was better incorporated than ATP, while using higher concentration of NTPs than in the first study. Both of these studies agree with our results: Remdesivir is better incorporated by the coronavirus polymerase elongation kinetics at low concentration of natural nucleotides. Indeed, in such condition, the probabilities of the pathways by which RDV-TP is incorporated, i.e. SNA and VSNA, increase significantly. In addition, we showed that RDV-TP incorporation remain noticeable at concentration as low as 20 µM, even when competing with 500 µM ATP. Being able to monitor RDV-TP incorporation at the single molecule level in competition with saturating concentration of NTP – including ATP –, while the SARS-CoV-2 polymerase was elongating a ~1 kb long RNA product further completes the understanding of RDV mechanism of action”

Reviewer #2:

This study investigates the impact of remdesivir (RDV) and other nucleotide analogs (NAs), 3'-dATP, 3'-dUTP, 3'-dCTP, Sofosbuvir-TP, ddhCTP, and T-1106-TP, on RNA synthesis by the SARS-CoV-2 polymerase using magnetic tweezer. This technique allows to directly quantify termination of viral synthesis, pausing or stalling of the polymerase, thus, defining the effect of these NAs on viral synthesis. The work includes good quality data and nicely stablishes an assay to follow the activity of the SARS-CoV-2 RNA-dependent RNA polymerase.

The authors thank the Reviewer for her/his appreciation of our work.

However, the basis of the assay and theory was largely presented before by the authors in Ref 22 and 23 (and other references therein). The main result here is that RDV incorporation does not prevent the complete viral RNA synthesis but causes an increase of pausing and back-tracking. This contrasts with a clear signature of synthesis termination induced by 3'-dATP. The work is complemented with the characterization of other NAs. Despite these results are of merit, I do not see this work to present a sufficient advance of our current knowledge.

We acknowledge Reviewer #2 opinion. However, we believe that our work is highly novel and important, as noted by Reviewer #1: “This [utilization of magnetic tweezers] provides a unique method to capture less common or difficult to observe phenomena such as backtracking. Most bulk ensemble assays would have difficulty detecting these phenomena.”

and Reviewer #3: “Overall, this manuscript constitutes a major advance in our understanding of chain termination in polymerases, and provides deep insights into the mechanism of action of remdesivir, which may contribute to further drug discovery efforts targeting this polymerase.”.

How these results translate into more physiological conditions at zero force should be addressed.

We show here that nucleotide analogs are incorporated via specific catalytic pathways (NAB, SNA, VSNA) depending on the nature of their modification (position and type in ribose, base). In the companion paper attached to this submission (https://doi.org/10.1101/2021.03.27.437309, currently in press), we show that the force has no effect on the probability to enter any catalytic pathways, and only affects the kinetics of a large conformational change occurring after chemistry. In conclusion, the force has no effect on nucleotide analog selection, as supported by our evaluation at both 25 and 35 pN. To clarify this, we have added in l.416-421:

“The present study demonstrates that nucleotide analog selection and incorporation is not force-dependent (Figure 2—figure supplement 3), which further validates the utilization of high-throughput magnetic tweezers to study nucleotide analog mechanism of action. This result is in agreement with our recent SARS-CoV-2 polymerase mechanochemistry paper, where we showed that entry probability in NAB, SNA and VSNA was not force dependent, and that force mainly affected the kinetics of a large conformational subsequent to chemistry, i.e. after nucleotide selection and incorporation.”

The rationale of testing other NAs apart from the mere systematic characterization of other compounds is unclear.

We have tested 3’-dATP, a well-known chain terminator, with Remdesivir, which was claimed to be a delayed chain terminator, as both are ATP analogue. We monitored the incorporation of Sofosbuvir, a well-known inhibitor of HCV replication, with its 3’-dNTP homologue, i.e. 3’-dUTP. T-1106-TP is a compound that was recently tested for coronavirus because it has a proven efficacy against influenza. ddhCTP is an endogenously produced nucleotide analog and chain terminator, and we compared it to its 3’-dNTP homologue, 3’-dCTP. Furthermore, each of these nucleotide analogs have modification at specific position, i.e. either at the ribose or at the base, which helps to understand how the polymerase responds to each modification. We have added this sentence in introduction in l.83-84 for clarity:

“We have therefore compared several analogs of the same natural nucleotide to determine how the nature of the modifications changes selection/mechanism of action.”

Similarly, I do not see the benefits of adding cell experiments with three compounds and experiments with the nsp14 mutant to address proofreading because they were inconclusive.

While we acknowledge Reviewer #2 opinion, Reviewer #3 has a different opinion and strongly appraises the importance of these results:

“Interestingly, the ddhCTP didn't actually work in infected cells. However, the authors presented a few theories on why it didn't work and said they plan to follow up to elucidate why it didn't work in cells. I think those results will be very interesting for the larger community working in this area.”

We share the opinion of Reviewer #3 and have therefore decided to keep these results in the revised manuscript.

1) Abstract. The term "deep backtrack" appearing in the abstract is unclear. Moreover, I would also avoid the use of word "unambiguously" in the abstract. I guess a claim on something cannot be ambiguous.

We agree with Reviewer #2, and we have modified the abstract that reads now:

“We show that RDV incorporation does not terminate viral RNA synthesis, but leads the polymerase into backtrack as far as 30 nt,…”

2) The force at which MT experiments were done is important. Although mentioned in the Methods, the force should be also indicated in Figure 1A, and in the main text. This will help understand the assay and movement of the bead upon nucleotide incorporation. The mechanical characterization of the initial (ssRNA) and final (dsRNA) substrates should be included as supplementary.

We have included the force in Figure 1A caption, and in the main text l.97:

“… and at constant force, i.e. 35 pN if not mentioned otherwise.”

We have included the dsRNA force extension in Figure 1- Supplement 1B.

3) Experiments were done at 35 and 25 pN. These are far from physiological forces, likely to be near zero. How would this might affect the reported conclusions? It would be good to complement with some (bulk?) experiments done at zero or near zero force, to backup for instance some of the claims on product length and termination. Additionally, I expect the equivalent MT experiment at low force to result in the increase of bead vertical position due to the conversion of ssRNA to dsRNA. Did the authors try that?

We have answered the point about physiological force above. In short, in the nucleotide addition cycle of the coronavirus polymerase, the force only affects a large conformational change occurring after chemistry, i.e. after nucleotide selection and incorporation. Concerning measurements at very low force, the regime mentioned by Reviewer #2 is rarely explored in such experiment because such experiments would have to be performed well below ~10 pN (at which ssRNA and dsRNA are of the same extension, preventing any measurable change in extension from polymerase elongation). However, at such force, the noise would be too large and prevent the high spatiotemporal resolution investigation we present here.

4) Related to previous point, the fact that results were similar at 25 and 35 pN is not sufficient to claim that "tension does not play a significant role in RDV-TP incorporation". This claim is also repeated for other nucleotides analogues. Authors tested very particular conditions and such general conclusion cannot be extracted from that data.

We have answered this point above.

5) Protein purification. Biochemical characterization of the purified proteins should be included, for instance a SDS-PAGE with purified proteins.

We have added a gel in Figure 1 —figure supplement 1D.

6) Figure 2 —figure supplement 1 is cited before than Figure 2. Not very logical. Suggest perhaps including the structure of each compounds in the main figure where used?

While Reviewer #2 is correct in the order of the figures, we think it is better to have all the compounds in the same figure, for the sake of comparison.

7) Authors claim that their assay works at saturating NTP concentration, an issue they believe is problematic with other published works (Refs 17 and 21). Could the authors determine the ratio of incorporation of RDV-TP versus ATP to contrast with the other published works (Refs 17, 21)?

Reviewer #2 is correct that our data shows the ability of our assay to observe nucleotide analogs incorporation at saturating concentration of competing natural NTPs. We think our assay is complementary to ensemble approaches, and we have amended the discussion in this sense (see our answer to point 4.c of Reviewer #1).

As RDV-TP is not a terminator, we cannot measure its incorporation vs ATP, and therefore we do not claim we have such a number. We can only assume its incorporation probability is high as we still see its effect on the kinetics at 20 µM vs 500 mM ATP.

8) Authors claim incorporation of RDV-TP leads to backtracking, but not to proofreading. This is a bit confusing. What would it be the function of backtracking here?

This question is in line with questions (1) and (2) by Reviewer #1, which have been answered there. Backtracking may have other function than proofreading, potentially in similarity-assisted copy-choice RNA recombination. However, to date, the true function of backtracking in viral RdRp’s has not yet been elucidated.

(9) The paper would benefit of including a table summarizing the effect of the different NA in the polymerase activity, and pointing out the main conclusions for each compound.

We have now included such a table.

(10) The description of the model and the analysis of dwell time distributions is too technical and difficult to follow in its current form. Equations are not numbered, terminology not defined, a figure is embedded within the text… I find all these developments more appropriate for a more specialized journal.

We thank Reviewer #2 for pointing out the missing equation numbers. We have now included them and moved the embedded figure into the Supplementary Figure.

(11) I guess the experiments using cells infected with SARS-CoV2 required a special biohazard security lab and specific measures. Please indicate all these details.

We have amended the Materials and methods l.615-618 that includes now:

“All experiments involving live SARS-CoV-2 were carried out under biosafety level 3 (BSL-3) containment by personnel wearing the appropriate PPE, including powered air purifying respirators with Tyvek suits, aprons, booties, and double gloves.”

(12) I do not see the benefit of including these cell experiments (Figure 6 – S3-S4), in their present form. Perhaps, a proper motivation is missing. The experiments with the nsp14 mutant are not conclusive and do not see the reason to include them.

We answered this point above.

Reviewer #3:

This manuscript focuses on understanding the mechanism of action of remdesivir in the inhibition of SARS-Cov2 polymerase, using single molecule methods. The findings are highly original, significant and surprising. The approach is highly robust and supported by a range of orthogonal studies. Overall, these findings should help those engaged directly in drug discovery by providing a critical foundational understanding for the action of remdesivir.

The research described in this manuscript has several findings that significantly impact the broader field polymerase inhibition. First, the authors were able to show using single molecule methods that remdesivir-TP incorporation leads to polymerase backtrack. This is important because the pause is long enough that an ensemble assay could mistake this backtrack for a termination event. Secondly, the researchers found the effective incorporation of remdesivir-TP was determined by its absolute concentration. This suggests remdesivir-TP and similar nucleotide analogs incorporate via the SNA or VSNA pathway and would be more likely to add to the RNA chain when substrate concentration is low (independent of stoichiometry with the competing native nucleotide). Thirdly, the researchers found the effective incorporation rate of obligatory terminators was affected by the stoichiometry of their competing native nucleotide rather than their absolute concentration. This suggests that obligatory terminators are incorporated via the NAB pathway. The pausing that the researchers observed in the polymerase elongation kinetics have recently been demonstrated by two other groups. However, this study improved upon the assay conditions used by other researchers to recapitulate in vivo conditions and remove bias from kinetics measurements.

The authors highlighted the issues with remdesivir, tested other nucleotide analogs, and proposed a better alternative based on their assays (ddhCTP). Interestingly, the ddhCTP didn't actually work in infected cells. However, the authors presented a few theories on why it didn't work and said they plan to follow up to elucidate why it didn't work in cells. I think those results will be very interesting for the larger community working in this area. It's clear that the authors made a substantial enough contribution on the mechanism of inhibition of SARS Cov2 polymerase to merit publication in eLife, independent of the work on the "improved" antiviral candidate.

It would have been useful to clarify for the reader the pharmaceutical import of the putative delayed chain termination (or pausing) relative to actual chemical chain termination. In other words, I'm assuming that in both cases the viral genome is considered to be non-transcribed (in that a chemical agent has been incorporated into the growing strand). This is true for most compounds in this broad class of anti-virals. The issues are usually surrounding the width of the therapeutic index and the degree to which resistant mutants arise.

Coronaviruses are unique among positive-strand RNA viruses in that they encode a proofreading exonuclease. Although it is unclear how the polymerase and exonuclease activities are coordinated, the current assumption is that errors are recognized when located at the terminus of nascent RNA. Therefore, nucleotide analogues which manifest their antiviral activity when embedded in nascent RNA should evade excision by the exonuclease.

We have added text conveying this sentiment here in l.70:

“The latter proofreads the terminus of the nascent RNA following synthesis by the polymerase and associated factors, a unique feature of coronaviruses relative to all other families of RNA viruses.”

And in lines 75-77:

“In other words, nsp14 adds another selection pressure on NAs: not only they must be efficiently incorporated by nsp12, they must also evade detection and excision by nsp14.”

Overall, this manuscript constitutes a major advance in our understanding of chain termination in polymerases, and provides deep insights into the mechanism of action of remdesivir, which may contribute to further drug discovery efforts targeting this polymerase. Additionally, the authors have highlighted and addressed issues in the methodologies of previous mechanistic studies that led others to erroneous conclusions.

We thank Reviewer #3 for her/his strong appraisal of our work.

Associated Data

    This section collects any data citations, data availability statements, or supplementary materials included in this article.

    Supplementary Materials

    Figure 1—figure supplement 1—source data 1. Source image for the SDS-PAGE gel in Figure 1—figure supplement 2A.
    Figure 6—figure supplement 4—source data 1. Source image for the agarose gel in Figure 6—figure supplement 4D.
    Supplementary file 1. Summary of statistics, rates, and probabilities for each experimental condition presented in this study.
    elife-70968-supp1.xls (54KB, xls)
    Supplementary file 2. Summary of statistics, rates, and probabilities for each experimental condition presented in this study.
    elife-70968-supp2.xls (46KB, xls)
    Transparent reporting form

    Data Availability Statement

    We provide two summary tables (Supplementary files 1 and 2) containing all the statistical information and parameter values extracted from the analysis, with their respective error estimates, and in which figures they are represented.


    Articles from eLife are provided here courtesy of eLife Sciences Publications, Ltd

    RESOURCES